On Wed, May 16, 2018 at 09:08:06PM +0200, Niklas Söderlund wrote: > Hi Ulrich, > > On 2018-05-16 15:07:01 +0200, Ulrich Hecht wrote: > > On Wed, Apr 11, 2018 at 11:01 AM, jacopo mondi <jacopo@xxxxxxxxxx> wrote: > > > Hello Kaneko-san, > > > > > > On Tue, Apr 03, 2018 at 09:43:02PM +0900, Yoshihiro Kaneko wrote: > > >> This series adds thermal support for r8a77995. > > >> R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2. > > >> Therefore this series adds r8a77995 support to rcar_thermal driver not > > >> rcar_gen3_thermal driver. > > > > > > I tested this on D3 Draak. > > > > > > I generated load expecting the detected temperature to rise. > > > > > > It took a while, and I only see a slight increase of the temperature > > > reported by the 'temp' attribute. > > > > Pointing a heat gun at the SoC, I managed to get the temperature up to > > 80000, and it went back to 40000 when I removed it. I'd say this > > works. > > I like your style! I contemplated using a hairdryer when testing some > Gen3 thermal work but decided against it. Good too see others are not as > weak minded as my self :-) I think that we may need some new tags to differentiate between weak and awesome tests. > > Tested-By: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx> > > > > CU > > Uli > > -- > Regards, > Niklas Söderlund >
