This series adds thermal support for r8a77995. R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2. Therefore this series adds r8a77995 support to rcar_thermal driver not rcar_gen3_thermal driver. This series is based on the next branch of Zhang Rui's linux tree. v3 [Yoshihiro Kaneko] * As suggested by Geert Uytterhoeven rcar_thermal.c: - make use_of_thermal in structure rcar_thermal_chip a single bit - add feature bits to rcar_thermal_chip - add the number of interrupts to rcar_thermal_chip - remove rcar_thermal_type in rcar_thermal_cip - make variable chip in rcar_thermal_probe() a const rcar-thermal.txt: * No change r8a77995.dtsi: * No change v2 [Yoshihiro Kaneko] * As suggested by Geert Uytterhoeven rcar_thermal.c: - remove rcar_of_data macro - store a pointer to rcar_thermal_chip in rcar_thermal_priv - remove unnecessary cast in rcar_thermal_dt_ids rcar-thermal.txt: - drop the fallback for D3 - update the paragraph about interrupts r8a77995.dtsi: - fix the base address and the register addresses - drop the fallback Yoshihiro Kaneko (3): thermal: rcar_thermal: add r8a77995 support dt-bindings: thermal: rcar-thermal: add R8A77995 support arm64: dts: renesas: r8a77995: add thermal device support .../devicetree/bindings/thermal/rcar-thermal.txt | 7 +- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 30 ++++ drivers/thermal/rcar_thermal.c | 154 ++++++++++++++++----- 3 files changed, 157 insertions(+), 34 deletions(-) -- 1.9.1
