Linux for Texus Instruments OMAP Processors

• Thread Index

• [GIT PULL] ARM: OMAP2+: some more hwmod & clock patches for v3.19
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH] ARM: DRA: hwmod: RTC: Add reset function for RTC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [GIT PULL 2/3] omap gpmc changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/3] omap gpmc changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap non-urgent fixes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/2] omap prcm clean-up for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• RE: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: "Griffis, Brad" <bgriffis@xxxxxx>
• Re: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/15] clk: divider: replace bitfield width with mask
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 01/15] clk: divider: replace bitfield width with mask
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [GIT PULL 2/2] omap prcm clean-up for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 2/2] omap driver changes for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 2/3] omap gpmc changes for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [GIT PULL 1/3] omap device tree changes for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 1/2] omap soc changes for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [GIT PULL 1/2] omap non-urgent fixes for v3.19
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH] ARM: DRA: hwmod: RTC: Add reset function for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH] ARM: DRA7: hwmod data: Add missing UART hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH 1/6] ARM: OMAP2+: hwmod: add parent_hwmod support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 2/3] ARM: OMAP2+: hwmod: AM335x/AM43x: add hwmod support for tscadc on am43x-evm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH 0/6] ARM: OMAP4+: hwmod: fixing omap4+ DSS hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH 1/6] ARM: OMAP2+: hwmod: add parent_hwmod support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv6 5/5] hwspinlock/omap: add support for dt nodes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• OMAP baseline test results for v3.18-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv6 5/5] hwspinlock/omap: add support for dt nodes
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• [PATCH 00/15] tz1090: add clock components
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 01/15] clk: divider: replace bitfield width with mask
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 0/3] mmc: omap_hsmmc: make more use of mmc library functionality
  • From: NeilBrown <neilb@xxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] clk: Make clk API return per-user struct clk instances
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• [PATCH V2] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 0/3] mmc: omap_hsmmc: make more use of mmc library functionality
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH v4 00/10] ARM: dts: TI: Add CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/10] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/10] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/10] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 06/10] input: touchscreen: edt-ft5x06: fix driver autoprobing
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/10] arm: omap: omap2plus_defconfig: enable ECAP and EHRPWM
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/10] arm: boot: dts: imx6qdl-tx6: switch over to new edt-ft5x06 compatible
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/10] arm: boot: dts: imx28-tx28: switch over to new edt-ft5x06 compatible
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/10] arm: boot: dts: imx53-tx53-x03x: switch over to new edt-ft5x06 compatible
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/10] arm: omap: omap2plus_defconfig: enable XHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/10] arm: boot: dts: am437x-sk: switch over to new edt-ft5306 compatible
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/10] arm: omap: omap2plus_defconfig: enable AM33XX SoC sound
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/10] arm: omap: omap2plus_defconfig: remove unwanted ethernet drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/10] arm: omap: omap2plus_defconfig: enable EDT FT5X06 touchscreen
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Fail to enter retention
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• gpio chip select for spi-omap2-mcspi.c
  • From: Urs Fässler <urs@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: ASoC: omap-mcbsp: Deletion of an unnecessary check before the function call "kfree"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 8/9] ARM: dts: sbc-t3x30: add audio support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 0/9] ARM: dts: sbc-t3x: add more features support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 5/9] ARM: dts: sb-t35: add EEPROM support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 9/9] ARM: dts: cm-t3x30: add keypad support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 1/9] ARM: dts: cm-t3x: cleanup comments indentation
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 4/9] ARM: dts: cm-t3x: add EEPROM support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 7/9] ARM: dts: sbc-t3x: add TV out display alias
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 2/9] ARM: dts: cm-t3x: add ADS7846 touchscreen support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 3/9] ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 6/9] ARM: dts: cm-t3x: add TV out support
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: Fail to enter retention
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: ASoC: omap-mcbsp: Deletion of an unnecessary check before the function call "kfree"
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: George McCollister <george.mccollister@xxxxxxxxx>
• Re: Fail to enter retention
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Smartreflex - validation failed
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: Fail to enter retention
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v9] ARM: omap: edma: add suspend resume hook
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v13 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v12 11/15] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
  • From: Roger Quadros <rogerq@xxxxxx>
• ASoC: omap-mcbsp: Deletion of an unnecessary check before the function call "kfree"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 0/4] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 4/7] ARM: l2c: Add support for overriding prefetch settings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v9 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 0/4] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v12 11/15] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v4 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• [PATCH] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [RFC PATCH] ARM: DRA: hwmod: RTC: Add reset function for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v4 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• OMAP baseline test results for v3.18-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] omap fixes against v3.18-rc4
  • From: Olof Johansson <olof@xxxxxxxxx>
• Fail to enter retention
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: dtb size limit? was Re: Tiny dts change breaks boot on n900
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: dtb size limit? was Re: Tiny dts change breaks boot on n900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] adp1653: Add device tree bindings for LED controller
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RFC] adp1653: Add device tree bindings for LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v12 11/15] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v4 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Add n900-battery support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] ARM: DTS: OMAP3-N900: add si4713 support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: George McCollister <george.mccollister@xxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• [GIT PULL 2/2] omap driver changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] omap soc changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v2 0/3] Add support for ADC on am437x-gp and am43x-epos-evm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: some clock/hwmod patches for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] mach-omap2: remove deprecated VIDEO_OMAP2 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix DSS PLL clock mux registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v8 2/8] can: c_can: Introduce c_can_driver_data structure
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 6/8] can: c_can: Disable pins when CAN interface is down
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 4/8] can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 7/8] can: c_can: Add support for TI DRA7 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 3/8] can: c_can: Add RAMINIT register information to driver data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 8/8] can: c_can: Add support for TI am3352 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 5/8] can: c_can: Add support for START pulse in RAMINIT sequence
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 1/8] can: c_can: Add timeout to c_can_hw_raminit_ti()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] ARM: dts: AM335x: Make charge delay a DT parameter for TSC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9] ARM: omap: edma: add suspend resume hook
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v9] ARM: omap: edma: add suspend resume hook
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v5 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] net: can: c_can: Add support for TI DRA7 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v7 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v7 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v5 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 8/8] net: can: c_can: Add support for TI am3352 DCAN
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH 1/2] mach-omap2: remove deprecated VIDEO_OMAP2 support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v4 8/8] net: can: c_can: Add support for TI am3352 DCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/2] mach-omap2: remove deprecated VIDEO_OMAP2 support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [RFC PATCH 0/6] ARM: OMAP4+: hwmod: fixing omap4+ DSS hwmods
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v5 6/7] clk: Make clk API return per-user struct clk instances
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v5 0/7] Per-user clock constraints
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• [PATCH v4 0/6] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 1/6] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 5/6] input: touchscreen: ti_am335x_tsc: Use charge delay DT parameter
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 6/6] input: touchscreen: ti_am335x_tsc: Replace delta filtering with median filtering
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 4/6] ARM: dts: AM335x: Make charge delay a DT parameter for TSC
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 0/3] Add support for ADC on am437x-gp and am43x-epos-evm
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: some clock/hwmod patches for v3.19
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 11/13] arm: dts: dra7: add DMA properties for UART
  • From: "Lennart Sorensen" <lsorense@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 11/13] arm: dts: dra7: add DMA properties for UART
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] ARM: Gumstix DuoVero: Bind vdac regulator to hdmi node
  • From: Adam YH Lee <adam.yh.lee@xxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] rpmsg: compute number of buffers to allocate from vrings
  • From: Suman Anna <s-anna@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 0/5] ARM: OMAP3+: DPLL: fix set_rate logic
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 8/8] net: can: c_can: Add support for TI am3352 DCAN
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 09/10] ARM: dts: am33xx: Update DCAN nodes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Tom Rini <trini@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• [RFC PATCH 0/3] DRA72: MMC HS200 support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH 0/3] DRA72: MMC HS200 support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/3] mmc: omap_hsmmc: set host capabilities by reading MMCHS_CAPA2 register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [RFC PATCH 3/3] ARM: dts: dra72-evm: Set the max-frequency to 192MHz
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 4/7] ARM: l2c: Add support for overriding prefetch settings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v8 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH 0/3] DRA72: MMC HS200 support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/3] mmc: omap_hsmmc: set host capabilities by reading MMCHS_CAPA2 register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/3] ARM: dts: dra72-evm: Set the max-frequency to 192MHz
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH 0/3] DRA72: MMC HS200 support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 10/10] ARM: dts: am335x-evm: Add DCAN1 details
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 09/10] ARM: dts: am33xx: Update DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 08/10] ARM: dts: am33xx: Add control module syscon node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 04/10] ARM: dts: dra72-evm: Add CAN support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 07/10] arm: dts: am437x-gp: Add dcan support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 05/10] ARM: dts: am4372: Add control module syscon node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 02/10] ARM: dts: DRA7: Add DCAN nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 03/10] ARM: dts: dra7-evm: Add CAN support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 01/10] ARM: dts: dra7: Add syscon regmap for CORE CONTROL area
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 00/10] ARM: dts: TI: Add CAN support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/8] net: can: c_can: Introduce c_can_driver_data structure
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCHv6 5/5] hwspinlock/omap: add support for dt nodes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix DSS PLL clock mux registers
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  • From: George McCollister <george.mccollister@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/5] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 0/5] omapdss: Add video output support for gta04 board
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 3/5] arm: dts: omap3-gta04: Add handling for tv output
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 5/5] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 4/5] arm: dts: omap3: Add definition for devconf1 register
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv6 5/5] hwspinlock/omap: add support for dt nodes
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv6 5/5] hwspinlock/omap: add support for dt nodes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCHv6 4/5] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [GIT PULL 3/3] omap clean-up for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] omap gpmc changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] omap device tree changes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 1/5] Documentation: dt: add common bindings for hwspinlock
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 0/2] bus: omap_l3_noc: Add resume hook to restore mask registers
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: wdt: Fix compatible property for watchdog node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix DSS PLL clock mux registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix DSS PLL clock mux registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: clock: remove unused function prototype
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] bus: omap_l3_noc: Add resume hook to restore mask registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 2/5] Documentation: dt: add the omap hwspinlock bindings document
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCHv6 1/5] Documentation: dt: add common bindings for hwspinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Fix broken gadget on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 07/19] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 10/19] OMAPDSS: Kconfig: Remove HDMI audio booleans from Kconfig
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 18/19] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 19/19] OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 17/19] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 16/19] OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 15/19] OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 14/19] OMAPDSS: hdmi4: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 13/19] OMAPDSS: hdmi4: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 12/19] OMAPDSS: hdmi.h: Add members to hdmi drvdata for audio implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 08/19] OMAPDSS: hdmi: Add pdev pointer for audio_pdev in HDMI DRV data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 04/19] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 06/19] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 03/19] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 05/19] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 02/19] OMAPDSS: hdmi5_core: Initialize mandatory sample_order parameter
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 01/19] OMAPDSS: hdmi_wp: Protect reserved bits in hdmi_wp_audio_config_format()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v7 06/20] OMAPDSS: omapdss.h: Remove audio_state member of struct omap_dss_device
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/4] video: omapdss: Add opa362 driver
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 1/4] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/4] Touchscreen performance related fixes
  • From: Johannes Pointner <johannes.pointner@xxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7 18/20] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v7 10/20] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 16/22] OMAPDSS: HDMI: rewrite HDMI PLL calculation code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 12/22] OMAPDSS: Add common PLL code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 08/22] OMAPDSS: DSI: rename clkin4ddr to clkdco
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 21/22] OMAPDSS: HDMI: use common DSS PLL support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 22/22] OMAPDSS: features: remove unused DSI PLL features
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 20/22] OMAPDSS: HDMI: remove extra poweroff
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 19/22] OMAPDSS: HDMI: split PLL enable & config
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 17/22] OMAPDSS: HDMI: Remove HDMI PLL reset
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 18/22] OMAPDSS: HDMI: store WP pointer to hdmi_pll_data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 15/22] OMAPDSS: HDMI5: disable interlace modes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 13/22] OMAPDSS: DSI: use common DSS PLL support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 14/22] OMAPDSS: HDMI: fix setting REFSEL
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 11/22] OMAPDSS: DSI: dsi_runtime_get/put in pll_init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 10/22] OMAPDSS: DSI: features: combine dsi & dispc hsdivs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 09/22] OMAPDSS: DSI: turn hsdivs fields to arrays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 07/22] OMAPDSS: DSI: use struct copy instead of individual field copy
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 06/22] OMAPDSS: DSI: remove pll_locked field
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 05/22] OMAPDSS: DSI: remove clkin from dsi_clock_info
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 04/22] OMAPDSS: DSI: separate LP clock info from dsi_clock_info
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 03/22] OMAPDSS: DSI: always power on hsclk & hsdiv
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 02/22] OMAPDSS: DSI: remove unused hsdiv wait funcs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 01/22] OMAPDSS: DSI: wait for hsdiv clocks when enabling PLL
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 00/22] OMAPDSS: Create a DSS PLL library
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v7 05/20] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 13/20] OMAPDSS: hdmi.h: Add members to hdmi drvdata for audio implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 14/20] OMAPDSS: hdmi4: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 12/20] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 10/20] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 19/20] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 18/20] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 17/20] OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 20/20] OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 15/20] OMAPDSS: hdmi4: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 16/20] OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 11/20] OMAPDSS: Kconfig: Remove HDMI audio booleans from Kconfig
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 08/20] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 06/20] OMAPDSS: omapdss.h: Remove audio_state member of struct omap_dss_device
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 09/20] OMAPDSS: hdmi: Add pdev pointer for audio_pdev in HDMI DRV data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 07/20] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 04/20] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 03/20] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 01/20] OMAPDSS: hdmi_wp: Protect reserved bits in hdmi_wp_audio_config_format()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 02/20] OMAPDSS: hdmi5_core: Initialize mandatory sample_order parameter
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 00/20] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH] ARM: dts: DRA7: wdt: Fix compatible property for watchdog node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [RESEND PATCH 2/2] extcon: gpio: Add support for using cable names
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] extcon: gpio: Add dt support for the driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: SGX support on AM572x
  • From: John Syn <john3909@xxxxxxxxx>
• Re: SGX support on AM572x
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFCv2 1/8] [media] si4713: switch to devm regulator API
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: SGX support on AM572x
  • From: John Syn <john3909@xxxxxxxxx>
• Re: SGX support on AM572x
  • From: Nishanth Menon <nm@xxxxxx>
• SGX support on AM572x
  • From: John Syn <john3909@xxxxxxxxx>
• Re: [RFCv2 1/8] [media] si4713: switch to devm regulator API
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [GIT PULL 2/2] omap prcm clean-up for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] omap non-urgent fixes for v3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap fixes against v3.18-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: clock: remove unused function prototype
  • From: Johan Hovold <johan@xxxxxxxxxx>
• RE: [PATCH v3 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: "R, Vignesh" <vigneshr@xxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: fix twl4030 build regression
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: fix twl4030 build regression
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv2 1/8] [media] si4713: switch to devm regulator API
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [RFCv2 1/8] [media] si4713: switch to devm regulator API
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• [PATCH] usb: phy: fix twl4030 build regression
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 2/6] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 1/6] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/6] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 4/6] ARM: dts: AM335x: Make charge delay a DT parameter for tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 5/6] input: touchscreen: ti_am335x_tsc: Use charge delay DT parameter
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 6/6] input: touchscreen: ti_am335x_tsc: Replace delta filtering with median filtering
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: OMAP4+: PM: Program CPU logic power state
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: OMAP4+: PM: centralize static dependency mapping table
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] w1: omap-hdq: support device probing with device-tree.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add aliases for all serial ports
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: dts: igep00x0: Add support for new hardware revisions.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: boot: dts: dra7: add labels to DWC3 nodes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: boot: dts: dra7: add labels to DWC3 nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm: boot: dts: am4372: enable dwc3 suspend PHY quirk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: dra72x-evm: Enable CPSW and MDIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: dra: dt-bindings: Fix output pull up/down
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [beagleboard] Re: BeagleBoard-X15 - seriously? :)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFCv2 5/8] [media] si4713: add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: Keep all VDD rails always-on
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 0/4] [media] si4713 DT binding
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv3 3/4] ARM: OMAP2: RX-51: update si4713 platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 0/4] [media] si4713 DT binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 1/4] [media] si4713: add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv3 2/4] [media] si4713: add DT binding documentation
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv3 4/4] [media] si4713: cleanup platform data
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv3 3/4] ARM: OMAP2: RX-51: update si4713 platform data
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH V2 3/3] ARM: dts: dra72-evm: Add MMC nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: dra72-evm: NAND and USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 2/2] bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 1/2] bus: omap_l3_noc: Add resume hook to restore context
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 0/2] bus: omap_l3_noc: Add resume hook to restore mask registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add DRA7xx CPSW Ethernet support in Device Tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: Use omap specific pinctrl defines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/13 v10] omap 8250 based UART + DMA
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP Mailbox DTS patches for 3.19
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: serial: remove last vestige of DTR_gpio support.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: AM43x: Fix DCDC3 regulator voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add more files under OMAP SUPPORT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: gpmc: Get rid of "ti,elm-id not found" warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] bus: omap_l3_noc: Add resume hook to restore mask registers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] bus: omap_l3_noc: Add resume hook to restore context
  • From: Nishanth Menon <nm@xxxxxx>
• Re: dtb size limit? was Re: Tiny dts change breaks boot on n900
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: dtb size limit? was Re: Tiny dts change breaks boot on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 18/48] mfd: twl4030-power: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 18/48] mfd: twl4030-power: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• dtb size limit? was Re: Tiny dts change breaks boot on n900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Tiny dts change breaks boot on n900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: ASoC: omap: enable sound support on n900 on devicetree-based boot
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 00/10] ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFCv2 0/8] [media] si4713 DT binding
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 3/5] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 3/5] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/5] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: tsc2005 touchscreen: implement disable attribute
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 2/5] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 18/48] mfd: twl4030-power: Register with kernel power-off handler
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 1/2] bus: omap_l3_noc: Add resume hook to restore context
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/2] bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/2] bus: omap_l3_noc: Add resume hook to restore mask registers
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v6 09/48] mfd: palmas: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 14/48] mfd: tps80031: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 16/48] mfd: tps6586x: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 17/48] mfd: tps65910: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 18/48] mfd: twl4030-power: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 35/48] arm: Register with kernel power-off handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] w1: omap-hdq: support device probing with device-tree.
  • From: Евгений Поляков <zbr@xxxxxxxxxxx>
• Re: tsc2005 touchscreen: implement disable attribute
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• ASoC: omap: enable sound support on n900 on devicetree-based boot
  • From: Pavel Machek <pavel@xxxxxx>
• Re: sound: enable sound support on n900 on devicetree-based boot
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: tsc2005 touchscreen: implement disable attribute
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: tsc2005 touchscreen: implement disable attribute
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: sound: enable sound support on n900 on devicetree-based boot
  • From: Mark Brown <broonie@xxxxxxxxxx>
• sound: enable sound support on n900 on devicetree-based boot
  • From: Pavel Machek <pavel@xxxxxx>
• tsc2005 touchscreen: implement disable attribute
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 11/11] ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: omap3-igep00x0: Remove i2c2 node.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 09/11] ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 08/11] ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 07/11] ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 06/11] ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 05/11] ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 04/11] ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 02/11] ARM: dts: omap3-igep00x0: Move NAND configuration to a common place.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 01/11] ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH v4 08/10] omap_hsmmc: pass mmc_priv struct to gpio init / free
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 10/10] omap_hsmmc: remove unused slot_id parameter
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 09/10] omap_hsmmc: Remove unnecessary callbacks from platform data
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 07/10] omap_hsmmc: remove unnecessary omap_hsmmc_slot_data indirection
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 06/10] omap_hsmmc: remove unused get_context_loss_count callback
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 05/10] omap_hsmmc: remove never read power_saving field in omap2_hsmmc_info
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 04/10] omap_hsmmc: remove un-initialized callbacks from platform data
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 03/10] omap_hsmmc: remove unused fields in platform_data
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 02/10] ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 01/10] ARM: OMAP2: MMC: include mmc-omap platform header directly
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v4 00/10] ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH 1/5] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/3] mmc: omap_hsmmc: make more use of mmc library functionality
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 1/3] mmc: omap_hsmmc: remove prepare/complete system suspend support.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 2/3] mmc: omap_hsmmc: use slot-gpio library for gpio support.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 3/3] mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] ARM: OMAP: serial: remove last vestige of DTR_gpio support.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] w1: omap-hdq: support device probing with device-tree.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
  • From: Tom Rini <trini@xxxxxx>
• RE: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
  • From: "Gerald Coley" <gerald@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [REPOST PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [REPOST PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4 0/8] net: can: Use syscon regmap for TI specific RAMINIT register
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 2/8] net: can: c_can: Introduce c_can_driver_data structure
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 5/8] net: can: c_can: Add support for START pulse in RAMINIT sequence
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 8/8] net: can: c_can: Add support for TI am3352 DCAN
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 7/8] net: can: c_can: Add support for TI DRA7 DCAN
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 6/8] net: can: c_can: Disable pins when CAN interface is down
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v4 1/8] net: can: c_can: Add timeout to c_can_hw_raminit_ti()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] arm: omap: hwmod: drop unnecessary list initialization
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFCv2 0/8] [media] si4713 DT binding
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3 00/10] ARM: dts: TI: Add CAN support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: OMAP2+: gpmc: Get rid of "ti,elm-id not found" warning
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: AM43x: Fix DCDC3 regulator voltage
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH v2 0/5] Touchscreen performance related fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 3/5] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 4/5] ARM: dts: AM335x: Make charge delay a DT parameter for tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 5/5] input: touchscreen: ti_am335x_tsc: Use charge delay DT parameter
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/5] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 1/5] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 2/4] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 3/4] arm: boot: dts: am335x-evm: Make charge delay a DT parameter for tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: AM43x: Fix DCDC3 regulator voltage
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: AM43x: Fix DCDC3 regulator voltage
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCHv4 4/7] hwspinlock/core: add common OF helpers
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: AM43x: Fix DCDC3 regulator voltage
  • From: Keerthy <a0393675@xxxxxx>
• Re: N900 modem support in 3.18-rc1
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>