The code calculating HDMI PLL parameters has always been very confusing.
Now that we are implementing a common PLL library for the DSS, it's
important that the PLL code is understandable.
This patch rewrites the calculation code, and removes a few hacks that
were used there.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/fbdev/omap2/dss/hdmi.h | 10 +++-
drivers/video/fbdev/omap2/dss/hdmi4.c | 9 +--
drivers/video/fbdev/omap2/dss/hdmi5.c | 9 +--
drivers/video/fbdev/omap2/dss/hdmi_phy.c | 31 ++++-------
drivers/video/fbdev/omap2/dss/hdmi_pll.c | 95 ++++++++++++++++----------------
5 files changed, 71 insertions(+), 83 deletions(-)
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index 4bbc9d206f4a..4b9bf0804a48 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -191,7 +191,9 @@ struct hdmi_pll_info {
u32 regmf;
u16 regm2;
u16 regsd;
- u16 dcofreq;
+
+ unsigned long clkdco;
+ unsigned long clkout;
};
struct hdmi_audio_format {
@@ -313,11 +315,13 @@ int hdmi_wp_init(struct platform_device *pdev, struct hdmi_wp_data *wp);
int hdmi_pll_enable(struct hdmi_pll_data *pll, struct hdmi_wp_data *wp);
void hdmi_pll_disable(struct hdmi_pll_data *pll, struct hdmi_wp_data *wp);
void hdmi_pll_dump(struct hdmi_pll_data *pll, struct seq_file *s);
-void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin, int phy);
+void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin,
+ unsigned long target_tmds);
int hdmi_pll_init(struct platform_device *pdev, struct hdmi_pll_data *pll);
/* HDMI PHY funcs */
-int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg);
+int hdmi_phy_configure(struct hdmi_phy_data *phy, unsigned long hfbitclk,
+ unsigned long lfbitclk);
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s);
int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy);
int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index 9a8713ca090c..1f2fbccaff1f 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
@@ -180,7 +180,6 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
- unsigned long phy;
struct hdmi_wp_data *wp = &hdmi.wp;
r = hdmi_power_on_core(dssdev);
@@ -195,10 +194,7 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
- /* the functions below use kHz pixel clock. TODO: change to Hz */
- phy = p->pixelclock / 1000;
-
- hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), phy);
+ hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), p->pixelclock);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi_pll_enable(&hdmi.pll, &hdmi.wp);
@@ -207,7 +203,8 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
goto err_pll_enable;
}
- r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
+ r = hdmi_phy_configure(&hdmi.phy, hdmi.pll.info.clkdco,
+ hdmi.pll.info.clkout);
if (r) {
DSSDBG("Failed to configure PHY\n");
goto err_phy_cfg;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5.c b/drivers/video/fbdev/omap2/dss/hdmi5.c
index c053d692ec16..e8ca9106c8af 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi5.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi5.c
@@ -198,7 +198,6 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
- unsigned long phy;
r = hdmi_power_on_core(dssdev);
if (r)
@@ -208,10 +207,7 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
- /* the functions below use kHz pixel clock. TODO: change to Hz */
- phy = p->pixelclock / 1000;
-
- hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), phy);
+ hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), p->pixelclock);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
@@ -225,7 +221,8 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
goto err_pll_enable;
}
- r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
+ r = hdmi_phy_configure(&hdmi.phy, hdmi.pll.info.clkdco,
+ hdmi.pll.info.clkout);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index e007ac892d79..bc9e07d2afbe 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
@@ -20,9 +20,7 @@
struct hdmi_phy_features {
bool bist_ctrl;
- bool calc_freqout;
bool ldo_voltage;
- unsigned long dcofreq_min;
unsigned long max_phy;
};
@@ -132,7 +130,8 @@ static void hdmi_phy_configure_lanes(struct hdmi_phy_data *phy)
REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, pol_val, 30, 27);
}
-int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
+int hdmi_phy_configure(struct hdmi_phy_data *phy, unsigned long hfbitclk,
+ unsigned long lfbitclk)
{
u8 freqout;
@@ -149,20 +148,16 @@ int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
if (phy_feat->bist_ctrl)
REG_FLD_MOD(phy->base, HDMI_TXPHY_BIST_CONTROL, 1, 11, 11);
- if (phy_feat->calc_freqout) {
- /* DCOCLK/10 is pixel clock, compare pclk with DCOCLK_MIN/10 */
- u32 dco_min = phy_feat->dcofreq_min / 10;
- u32 pclk = cfg->timings.pixelclock;
-
- if (pclk < dco_min)
- freqout = 0;
- else if ((pclk >= dco_min) && (pclk < phy_feat->max_phy))
- freqout = 1;
- else
- freqout = 2;
- } else {
+ /*
+ * If the hfbitclk != lfbitclk, it means the lfbitclk was configured
+ * to be used for TMDS.
+ */
+ if (hfbitclk != lfbitclk)
+ freqout = 0;
+ else if (hfbitclk / 10 < phy_feat->max_phy)
freqout = 1;
- }
+ else
+ freqout = 2;
/*
* Write to phy address 0 to configure the clock
@@ -184,17 +179,13 @@ int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
static const struct hdmi_phy_features omap44xx_phy_feats = {
.bist_ctrl = false,
- .calc_freqout = false,
.ldo_voltage = true,
- .dcofreq_min = 500000000,
.max_phy = 185675000,
};
static const struct hdmi_phy_features omap54xx_phy_feats = {
.bist_ctrl = true,
- .calc_freqout = true,
.ldo_voltage = false,
- .dcofreq_min = 750000000,
.max_phy = 186000000,
};
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index b28d41a08a8f..f04d435c4c0f 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
@@ -20,14 +20,9 @@
#include "dss.h"
#include "hdmi.h"
-#define HDMI_DEFAULT_REGN 16
-#define HDMI_DEFAULT_REGM2 1
-
struct hdmi_pll_features {
bool has_refsel;
bool sys_reset;
- /* this is a hack, need to replace it with a better computation of M2 */
- bool bound_dcofreq;
unsigned long fint_min, fint_max;
u16 regm_max;
unsigned long dcofreq_low_min, dcofreq_low_max;
@@ -52,55 +47,61 @@ void hdmi_pll_dump(struct hdmi_pll_data *pll, struct seq_file *s)
DUMPPLL(PLLCTRL_CFG4);
}
-void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin, int phy)
+void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin,
+ unsigned long target_tmds)
{
struct hdmi_pll_info *pi = &pll->info;
- unsigned long refclk;
- u32 mf;
+ unsigned long fint, clkdco, clkout;
+ unsigned long target_bitclk, target_clkdco;
+ unsigned long min_dco;
+ unsigned n, m, mf, m2, sd;
+
+ DSSDBG("clkin %lu, target tmds %lu\n", clkin, target_tmds);
+
+ target_bitclk = target_tmds * 10;
- /* use our funky units */
- clkin /= 10000;
+ /* Fint */
+ n = DIV_ROUND_UP(clkin, pll_feat->fint_max);
+ fint = clkin / n;
- /*
- * Input clock is predivided by N + 1
- * out put of which is reference clk
- */
+ /* adjust m2 so that the clkdco will be high enough */
+ min_dco = roundup(pll_feat->dcofreq_low_min, fint);
+ m2 = DIV_ROUND_UP(min_dco, target_bitclk);
+ if (m2 == 0)
+ m2 = 1;
- pi->regn = HDMI_DEFAULT_REGN;
+ target_clkdco = target_bitclk * m2;
+ m = target_clkdco / fint;
- refclk = clkin / pi->regn;
+ clkdco = fint * m;
- /* temorary hack to make sure DCO freq isn't calculated too low */
- if (pll_feat->bound_dcofreq && phy <= 65000)
- pi->regm2 = 3;
+ /* adjust clkdco with fractional mf */
+ if (WARN_ON(target_clkdco - clkdco > fint))
+ mf = 0;
else
- pi->regm2 = HDMI_DEFAULT_REGM2;
-
- /*
- * multiplier is pixel_clk/ref_clk
- * Multiplying by 100 to avoid fractional part removal
- */
- pi->regm = phy * pi->regm2 / refclk;
-
- /*
- * fractional multiplier is remainder of the difference between
- * multiplier and actual phy(required pixel clock thus should be
- * multiplied by 2^18(262144) divided by the reference clock
- */
- mf = (phy - pi->regm / pi->regm2 * refclk) * 262144;
- pi->regmf = pi->regm2 * mf / refclk;
-
- /*
- * Dcofreq should be set to 1 if required pixel clock
- * is greater than 1000MHz
- */
- pi->dcofreq = phy > 1000 * 100;
- pi->regsd = ((pi->regm * clkin / 10) / (pi->regn * 250) + 5) / 10;
-
- DSSDBG("M = %d Mf = %d\n", pi->regm, pi->regmf);
- DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd);
-}
+ mf = (u32)div_u64(262144ull * (target_clkdco - clkdco), fint);
+
+ if (mf > 0)
+ clkdco += (u32)div_u64((u64)mf * fint, 262144);
+ clkout = clkdco / m2;
+
+ /* sigma-delta */
+ sd = DIV_ROUND_UP(fint * m, 250000000);
+
+ DSSDBG("N = %u, M = %u, M.f = %u, M2 = %u, SD = %u\n",
+ n, m, mf, m2, sd);
+ DSSDBG("Fint %lu, clkdco %lu, clkout %lu\n", fint, clkdco, clkout);
+
+ pi->regn = n;
+ pi->regm = m;
+ pi->regmf = mf;
+ pi->regm2 = m2;
+ pi->regsd = sd;
+
+ pi->clkdco = clkdco;
+ pi->clkout = clkout;
+}
static int hdmi_pll_config(struct hdmi_pll_data *pll)
{
@@ -123,7 +124,7 @@ static int hdmi_pll_config(struct hdmi_pll_data *pll)
if (pll_feat->has_refsel)
r = FLD_MOD(r, 0x3, 22, 21); /* REFSEL = SYSCLK */
- if (fmt->dcofreq)
+ if (fmt->clkdco > pll_feat->dcofreq_low_max)
r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */
else
r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */
@@ -210,7 +211,6 @@ void hdmi_pll_disable(struct hdmi_pll_data *pll, struct hdmi_wp_data *wp)
static const struct hdmi_pll_features omap44xx_pll_feats = {
.sys_reset = false,
- .bound_dcofreq = false,
.fint_min = 500000,
.fint_max = 2500000,
.regm_max = 4095,
@@ -223,7 +223,6 @@ static const struct hdmi_pll_features omap44xx_pll_feats = {
static const struct hdmi_pll_features omap54xx_pll_feats = {
.has_refsel = true,
.sys_reset = true,
- .bound_dcofreq = true,
.fint_min = 620000,
.fint_max = 2500000,
.regm_max = 2046,
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
