struct dsi_clock_info contains clkin field, which is the rate of the
PLL's input clock. This field is not needed, as it can be easily
retrieved by using the clk_get_rate().
This patch removes the clkin field.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/fbdev/omap2/dss/dpi.c | 1 -
drivers/video/fbdev/omap2/dss/dsi.c | 13 ++++---------
drivers/video/fbdev/omap2/dss/dss.h | 1 -
3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index aa095c4927ec..91f18ab72007 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -223,7 +223,6 @@ static bool dpi_dsi_clk_calc(struct dpi_data *dpi, unsigned long pck,
ctx->dsidev = dpi->dsidev;
ctx->pck_min = pck - 1000;
ctx->pck_max = pck + 1000;
- ctx->dsi_cinfo.clkin = clkin;
pll_min = 0;
pll_max = 0;
diff --git a/drivers/video/fbdev/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 1c5a15581669..deab4135ddc0 100644
--- a/drivers/video/fbdev/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -1486,8 +1486,7 @@ static int dsi_calc_clock_rates(struct platform_device *dsidev,
if (cinfo->regm_dsi > dsi->regm_dsi_max)
return -EINVAL;
- cinfo->clkin = clk_get_rate(dsi->sys_clk);
- cinfo->fint = cinfo->clkin / cinfo->regn;
+ cinfo->fint = clk_get_rate(dsi->sys_clk) / cinfo->regn;
if (cinfo->fint > dsi->fint_max || cinfo->fint < dsi->fint_min)
return -EINVAL;
@@ -1548,7 +1547,6 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
DSSDBG("DSI PLL clock config starts");
- dsi->current_cinfo.clkin = cinfo->clkin;
dsi->current_cinfo.fint = cinfo->fint;
dsi->current_cinfo.clkin4ddr = cinfo->clkin4ddr;
dsi->current_cinfo.dsi_pll_hsdiv_dispc_clk =
@@ -1563,13 +1561,13 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
DSSDBG("DSI Fint %ld\n", cinfo->fint);
- DSSDBG("clkin rate %ld\n", cinfo->clkin);
+ DSSDBG("clkin rate %ld\n", clk_get_rate(dsi->sys_clk));
/* DSIPHY == CLKIN4DDR */
DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu = %lu\n",
cinfo->regm,
cinfo->regn,
- cinfo->clkin,
+ clk_get_rate(dsi->sys_clk),
cinfo->clkin4ddr);
DSSDBG("Data rate on 1 DSI lane %ld Mbps\n",
@@ -1771,7 +1769,7 @@ static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
seq_printf(s, "- DSI%d PLL -\n", dsi_module + 1);
- seq_printf(s, "dsi pll clkin\t%lu\n", cinfo->clkin);
+ seq_printf(s, "dsi pll clkin\t%lu\n", clk_get_rate(dsi->sys_clk));
seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn);
@@ -4780,7 +4778,6 @@ static bool dsi_cm_calc(struct dsi_data *dsi,
ctx->req_pck_min = pck;
ctx->req_pck_nom = pck;
ctx->req_pck_max = pck * 3 / 2;
- ctx->dsi_cinfo.clkin = clkin;
pll_min = max(cfg->hs_clk_min * 4, txbyteclk * 4 * 4);
pll_max = cfg->hs_clk_max * 4;
@@ -5066,8 +5063,6 @@ static bool dsi_vm_calc(struct dsi_data *dsi,
ctx->dsidev = dsi->pdev;
ctx->config = cfg;
- ctx->dsi_cinfo.clkin = clkin;
-
/* these limits should come from the panel driver */
ctx->req_pck_min = t->pixelclock - 1000;
ctx->req_pck_nom = t->pixelclock;
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 712592d2e5f7..45e255ecff29 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -114,7 +114,6 @@ struct dsi_clock_info {
/* rates that we get with dividers below */
unsigned long fint;
unsigned long clkin4ddr;
- unsigned long clkin;
unsigned long dsi_pll_hsdiv_dispc_clk; /* OMAP3: DSI1_PLL_CLK
* OMAP4: PLLx_CLK1 */
unsigned long dsi_pll_hsdiv_dsi_clk; /* OMAP3: DSI2_PLL_CLK
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
