* Nishanth Menon <nm@xxxxxx> [141105 09:12]:
> On 11/03/2014 04:09 AM, Roger Quadros wrote:
> > For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the
> > PULL_DIS bit which disables the PULLs.
> >
> > PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't
> > use it in the PIN_OUTPUT_PULLUP/DOWN macros.
> >
> > Fixes: 23d9cec07c58 ("pinctrl: dra: dt-bindings: Fix pull enable/disable")
> >
> > Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> > ---
> > include/dt-bindings/pinctrl/dra.h | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
> > index 3d33794..7448edf 100644
> > --- a/include/dt-bindings/pinctrl/dra.h
> > +++ b/include/dt-bindings/pinctrl/dra.h
> > @@ -40,8 +40,8 @@
> >
> > /* Active pin states */
> > #define PIN_OUTPUT (0 | PULL_DIS)
> > -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
> > -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
> > +#define PIN_OUTPUT_PULLUP (PULL_UP)
> > +#define PIN_OUTPUT_PULLDOWN (0)
> > #define PIN_INPUT (INPUT_EN | PULL_DIS)
> > #define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
> > #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
> >
>
>
> There might be additional updates needed to DRA7 pinctrl sequencing
> requirements based on latest documentation:
>
> http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf#page=4004&zoom=auto,0,274.1
>
> But, that has nothing to do with the bug that is currently being fixed
> in this patch,.
>
> So, for the record:
> Acked-by: Nishanth Menon <nm@xxxxxx>
OK applying into omap-for-v3.18/fixes thanks.
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
