[PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The platform device should only be registered from OMAPDSS HDMI
driver. The platform driver registers and unregisters all ASoC
components needed for OMAP HDMI audio.

The hdmi audio driver implements cpu-dai component using the callbacks
provided by OMAPDSS and registers the component under DSS HDMI
device. Omap-pcm is registered for platform component also under DSS
HDMI device. Dummy codec is used as as codec component. The hdmi audio
driver implements also the card and registers it under its own
platform device.

Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
 include/sound/omap-hdmi-audio.h  |   43 ++++
 sound/soc/omap/Kconfig           |   15 ++
 sound/soc/omap/Makefile          |    2 +
 sound/soc/omap/omap-hdmi-audio.c |  407 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 467 insertions(+)
 create mode 100644 include/sound/omap-hdmi-audio.h
 create mode 100644 sound/soc/omap/omap-hdmi-audio.c

diff --git a/include/sound/omap-hdmi-audio.h b/include/sound/omap-hdmi-audio.h
new file mode 100644
index 0000000..afdb416
--- /dev/null
+++ b/include/sound/omap-hdmi-audio.h
@@ -0,0 +1,43 @@
+/*
+ * hdmi-audio.c -- OMAP4+ DSS HDMI audio support library
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Jyri Sarha <jsarha@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <video/omapdss.h>
+
+#ifndef __OMAP_HDMI_AUDIO_H__
+#define __OMAP_HDMI_AUDIO_H__
+
+struct omap_hdmi_audio_ops {
+	int (*audio_startup)(struct device *dev,
+			     void (*abort_cb)(struct device *dev));
+	int (*audio_shutdown)(struct device *dev);
+	int (*audio_start)(struct device *dev);
+	void (*audio_stop)(struct device *dev);
+	int (*audio_config)(struct device *dev,
+			    struct omap_dss_audio *dss_audio);
+};
+
+/* HDMI audio initalization data */
+struct omap_hdmi_audio_pdata {
+	struct device *dev;
+	enum omapdss_version dss_version;
+	phys_addr_t audio_dma_addr;
+
+	const struct omap_hdmi_audio_ops *ops;
+};
+
+#endif /* __OMAP_HDMI_AUDIO_H__ */
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d44463a..2b32b3e 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -15,6 +15,21 @@ config SND_OMAP_SOC_MCPDM
 config SND_OMAP_SOC_HDMI
 	tristate
 
+config SND_OMAP_SOC_HDMI_AUDIO
+	tristate "HDMI audio support for OMAP4+ based SoCs"
+	depends on SND_OMAP_SOC
+	help
+	  For HDMI audio to work OMAPDSS HDMI support should be
+	  enabled.
+	  The hdmi audio driver implements cpu-dai component using the
+	  callbacks provided by OMAPDSS and registers the component
+	  under DSS HDMI device. Omap-pcm is registered for platform
+	  component also under DSS HDMI device. Dummy codec is used as
+	  as codec component. The hdmi audio driver implements also
+	  the card and registers it under its own platform device.
+	  The device for the dirver is registered by OMAPDSS hdmi
+	  driver.
+
 config SND_OMAP_SOC_N810
 	tristate "SoC Audio support for Nokia N810"
 	depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index a725905..40688a6 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -4,12 +4,14 @@ snd-soc-omap-dmic-objs := omap-dmic.o
 snd-soc-omap-mcbsp-objs := omap-mcbsp.o mcbsp.o
 snd-soc-omap-mcpdm-objs := omap-mcpdm.o
 snd-soc-omap-hdmi-objs := omap-hdmi.o
+snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o
 
 obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o
 obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o
 obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
 obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
 obj-$(CONFIG_SND_OMAP_SOC_HDMI) += snd-soc-omap-hdmi.o
+obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o
 
 # OMAP Machine Support
 snd-soc-n810-objs := n810.o
diff --git a/sound/soc/omap/omap-hdmi-audio.c b/sound/soc/omap/omap-hdmi-audio.c
new file mode 100644
index 0000000..3f9ac7d
--- /dev/null
+++ b/sound/soc/omap/omap-hdmi-audio.c
@@ -0,0 +1,407 @@
+/*
+ * omap-hdmi-audio.c -- OMAP4+ DSS HDMI audio support library
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Jyri Sarha <jsarha@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#include <sound/asoundef.h>
+#include <sound/omap-pcm.h>
+#include <sound/omap-hdmi-audio.h>
+#include <video/omapdss.h>
+
+#define DRV_NAME "omap-hdmi-audio"
+
+struct hdmi_audio_data {
+	struct snd_soc_card *card;
+
+	const struct omap_hdmi_audio_ops *ops;
+	struct device *dssdev;
+	struct snd_dmaengine_dai_dma_data dma_data;
+	struct omap_dss_audio dss_audio;
+	struct snd_aes_iec958 iec;
+	struct snd_cea_861_aud_if cea;
+
+	struct mutex current_stream_lock;
+	struct snd_pcm_substream *current_stream;
+};
+
+static
+struct hdmi_audio_data *card_drvdata_substream(struct snd_pcm_substream *ss)
+{
+	struct snd_soc_pcm_runtime *rtd = ss->private_data;
+
+	return snd_soc_card_get_drvdata(rtd->card);
+}
+
+static void hdmi_dai_abort(struct device *dev)
+{
+	struct hdmi_audio_data *ad = dev_get_drvdata(dev);
+
+	mutex_lock(&ad->current_stream_lock);
+	if (ad->current_stream && ad->current_stream->runtime &&
+	    snd_pcm_running(ad->current_stream)) {
+		dev_err(dev, "HDMI display disabled, aborting playback\n");
+		snd_pcm_stream_lock_irq(ad->current_stream);
+		snd_pcm_stop(ad->current_stream, SNDRV_PCM_STATE_DISCONNECTED);
+		snd_pcm_stream_unlock_irq(ad->current_stream);
+	}
+	mutex_unlock(&ad->current_stream_lock);
+}
+
+static int hdmi_dai_startup(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *ad = card_drvdata_substream(substream);
+	int ret;
+	/*
+	 * Make sure that the period bytes are multiple of the DMA packet size.
+	 * Largest packet size we use is 32 32-bit words = 128 bytes
+	 */
+	ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
+	if (ret < 0) {
+		dev_err(dai->dev, "could not apply constraint\n");
+		return ret;
+	}
+
+	snd_soc_dai_set_dma_data(dai, substream, &ad->dma_data);
+
+	mutex_lock(&ad->current_stream_lock);
+	ad->current_stream = substream;
+	mutex_unlock(&ad->current_stream_lock);
+
+	ret = ad->ops->audio_startup(ad->dssdev, hdmi_dai_abort);
+
+	if (ret) {
+		mutex_lock(&ad->current_stream_lock);
+		ad->current_stream = NULL;
+		mutex_unlock(&ad->current_stream_lock);
+	}
+
+	return ret;
+}
+
+static int hdmi_dai_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *ad = card_drvdata_substream(substream);
+	struct snd_aes_iec958 *iec = &ad->iec;
+	struct snd_cea_861_aud_if *cea = &ad->cea;
+
+	WARN_ON(ad->current_stream != substream);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		ad->dma_data.maxburst = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		ad->dma_data.maxburst = 32;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	ad->dss_audio.iec = iec;
+	ad->dss_audio.cea = cea;
+	/*
+	 * fill the IEC-60958 channel status word
+	 */
+	/* initialize the word bytes */
+	memset(iec->status, 0, sizeof(iec->status));
+
+	/* specify IEC-60958-3 (commercial use) */
+	iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+
+	/* specify that the audio is LPCM*/
+	iec->status[0] &= ~IEC958_AES0_NONAUDIO;
+
+	iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+
+	iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
+
+	iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
+
+	iec->status[1] = IEC958_AES1_CON_GENERAL;
+
+	iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
+
+	iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
+
+	switch (params_rate(params)) {
+	case 32000:
+		iec->status[3] |= IEC958_AES3_CON_FS_32000;
+		break;
+	case 44100:
+		iec->status[3] |= IEC958_AES3_CON_FS_44100;
+		break;
+	case 48000:
+		iec->status[3] |= IEC958_AES3_CON_FS_48000;
+		break;
+	case 88200:
+		iec->status[3] |= IEC958_AES3_CON_FS_88200;
+		break;
+	case 96000:
+		iec->status[3] |= IEC958_AES3_CON_FS_96000;
+		break;
+	case 176400:
+		iec->status[3] |= IEC958_AES3_CON_FS_176400;
+		break;
+	case 192000:
+		iec->status[3] |= IEC958_AES3_CON_FS_192000;
+		break;
+	default:
+		dev_err(dai->dev, "rate not supported!\n");
+		return -EINVAL;
+	}
+
+	/* specify the clock accuracy */
+	iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
+
+	/*
+	 * specify the word length. The same word length value can mean
+	 * two different lengths. Hence, we need to specify the maximum
+	 * word length as well.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
+		iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
+		iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Fill the CEA-861 audio infoframe (see spec for details)
+	 */
+
+	cea->db1_ct_cc = (params_channels(params) - 1)
+		& CEA861_AUDIO_INFOFRAME_DB1CC;
+	cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
+
+	cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
+	cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
+
+	cea->db3 = 0; /* not used, all zeros */
+
+	/*
+	 * The OMAP HDMI IP requires to use the 8-channel channel code when
+	 * transmitting more than two channels.
+	 */
+	if (params_channels(params) == 2)
+		cea->db4_ca = 0x0;
+	else
+		cea->db4_ca = 0x13;
+
+	cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
+	/* the expression is trivial but makes clear what we are doing */
+	cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
+
+	return ad->ops->audio_config(ad->dssdev, &ad->dss_audio);
+}
+
+static int hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *ad = card_drvdata_substream(substream);
+	int err = 0;
+
+	WARN_ON(ad->current_stream != substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		err = ad->ops->audio_start(ad->dssdev);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ad->ops->audio_stop(ad->dssdev);
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static void hdmi_dai_shutdown(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *ad = card_drvdata_substream(substream);
+
+	WARN_ON(ad->current_stream != substream);
+
+	ad->ops->audio_shutdown(ad->dssdev);
+
+	mutex_lock(&ad->current_stream_lock);
+	ad->current_stream = NULL;
+	mutex_unlock(&ad->current_stream_lock);
+}
+
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
+	.startup	= hdmi_dai_startup,
+	.hw_params	= hdmi_dai_hw_params,
+	.trigger	= hdmi_dai_trigger,
+	.shutdown	= hdmi_dai_shutdown,
+};
+
+static const struct snd_soc_component_driver omap_hdmi_component = {
+	.name = "omapdss_hdmi",
+};
+
+static struct snd_soc_dai_driver omap5_hdmi_dai = {
+	.name = "omap5-hdmi-dai",
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+			  SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
+			  SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
+			  SNDRV_PCM_RATE_192000),
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops = &hdmi_dai_ops,
+};
+
+static struct snd_soc_dai_driver omap4_hdmi_dai = {
+	.name = "omap4-hdmi-dai",
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+			  SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
+			  SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
+			  SNDRV_PCM_RATE_192000),
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+	},
+	.ops = &hdmi_dai_ops,
+};
+
+static int omap_hdmi_audio_probe(struct platform_device *pdev)
+{
+	struct omap_hdmi_audio_pdata *ha = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct hdmi_audio_data *ad;
+	struct snd_soc_dai_driver *dai_drv;
+	struct snd_soc_card *card;
+	int ret;
+
+	if (!ha) {
+		dev_err(dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	ad = devm_kzalloc(dev, sizeof(*ad), GFP_KERNEL);
+	if (!ad)
+		return -ENOMEM;
+	ad->dssdev = ha->dev;
+	ad->ops = ha->ops;
+	ad->dma_data.addr = ha->audio_dma_addr;
+	ad->dma_data.filter_data = "audio_tx";
+	ad->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	mutex_init(&ad->current_stream_lock);
+
+	switch (ha->dss_version) {
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
+		dai_drv = &omap4_hdmi_dai;
+		break;
+	case OMAPDSS_VER_OMAP5:
+		dai_drv = &omap5_hdmi_dai;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = snd_soc_register_component(ad->dssdev, &omap_hdmi_component,
+					 dai_drv, 1);
+	if (ret)
+		return ret;
+
+	ret = omap_pcm_platform_register(ad->dssdev);
+	if (ret)
+		return ret;
+
+	card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
+	card->name = devm_kasprintf(dev, GFP_KERNEL,
+				    "HDMI %s", dev_name(ad->dssdev));
+	card->owner = THIS_MODULE;
+	card->dai_link =
+		devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL);
+	card->dai_link->name = card->name;
+	card->dai_link->stream_name = card->name;
+	card->dai_link->cpu_dai_name = dev_name(ad->dssdev);
+	card->dai_link->platform_name = dev_name(ad->dssdev);
+	card->dai_link->codec_name = "snd-soc-dummy";
+	card->dai_link->codec_dai_name = "snd-soc-dummy-dai";
+	card->num_links = 1;
+	card->dev = dev;
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(dev, "snd_soc_register_card failed (%d)\n", ret);
+		snd_soc_unregister_component(ad->dssdev);
+		return ret;
+	}
+
+	ad->card = card;
+	snd_soc_card_set_drvdata(card, ad);
+
+	dev_set_drvdata(dev, ad);
+
+	return 0;
+}
+
+static int omap_hdmi_audio_remove(struct platform_device *pdev)
+{
+	struct hdmi_audio_data *ad = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(ad->card);
+	snd_soc_unregister_component(ad->dssdev);
+	return 0;
+}
+
+static struct platform_driver hdmi_audio_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = omap_hdmi_audio_probe,
+	.remove = omap_hdmi_audio_remove,
+};
+
+module_platform_driver(hdmi_audio_driver);
+
+MODULE_AUTHOR("Jyri Sarha <jsarha@xxxxxx>");
+MODULE_DESCRIPTION("OMAP HDMI Audio Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux