Hi Pavel,
On 11/20/2014 01:12 PM, Pavel Machek wrote:
Hi!
I would also swap the segments of a property name to follow the convention
as in case of "regulator-max-microamp".
Updated version:
==========================================================
Optional properties for child nodes:
- max-microamp : maximum intensity in microamperes of the LED
(torch LED for flash devices)
- flash-max-microamp : maximum intensity in microamperes of the
flash LED; it is mandatory if the led should
support the flash mode
- flash-timeout-microsec : timeout in microseconds after which the flash
led is turned off
Works for me. Do you want to submit a patch or should I do it?
You can submit a patch for leds/common.txt and a separate patch for the
adp1653 with a reference to the leds/common.txt for the child nodes.
- indicator-pattern : identifier of the blinking pattern for the
indicator led
This would need a bit more documentation, no?
- indicator-pattern : identifier of the blinking pattern for the
indicator led; valid identifiers should be
defined in the documentation of the parent
node.
I wouldn't go for pre-defined identifiers as the pattern
can be a combination of various settings like ramp-up, ramp-down,
pulse time etc. Drivers should expose only few combinations of
these settings in my opinion, like e.g. leds-lm355x.c does.
Regards,
Jacek
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
