Re: [PATCH v5 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/14/2014 04:37 PM, Roger Quadros wrote:
> Some TI SoCs like DRA7 have a RAMINIT register specification
> different from the other AMxx SoCs and as expected by the
> existing driver.
> 
> To add more insanity, this register is shared with other
> IPs like DSS, PCIe and PWM.
> 
> Provides a more generic mechanism to specify the RAMINIT
> register location and START/DONE bit position and use the
> syscon/regmap framework to access the register.
> 
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
>  .../devicetree/bindings/net/can/c_can.txt          |   3 +
>  drivers/net/can/c_can/c_can.h                      |  11 +-
>  drivers/net/can/c_can/c_can_platform.c             | 113 ++++++++++++++-------
>  3 files changed, 87 insertions(+), 40 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
> index 8f1ae81..a3ca3ee 100644
> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/c_can.txt
> @@ -12,6 +12,9 @@ Required properties:
>  Optional properties:
>  - ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
>  			  instance number
> +- syscon-raminit	: Handle to system control region that contains the
> +			  RAMINIT register, register offset to the RAMINIT
> +			  register and the CAN instance number (0 offset).
>  
>  Note: "ti,hwmods" field is used to fetch the base address and irq
>  resources from TI, omap hwmod data base during device registration.
> diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
> index 3c305a1..0e17c7b 100644
> --- a/drivers/net/can/c_can/c_can.h
> +++ b/drivers/net/can/c_can/c_can.h
> @@ -179,6 +179,14 @@ struct c_can_driver_data {
>  	bool raminit_pulse;	/* If set, sets and clears START bit (pulse) */
>  };
>  
> +/* Out of band RAMINIT register access via syscon regmap */
> +struct c_can_raminit {
> +	struct regmap *syscon;	/* for raminit ctrl. reg. access */
> +	unsigned int reg;	/* register index within syscon */
> +	u8 start_bit;
> +	u8 done_bit;
> +};
> +
>  /* c_can private data structure */
>  struct c_can_priv {
>  	struct can_priv can;	/* must be the first member */
> @@ -196,8 +204,7 @@ struct c_can_priv {
>  	const u16 *regs;
>  	void *priv;		/* for board-specific data */
>  	enum c_can_dev_id type;
> -	u32 __iomem *raminit_ctrlreg;
> -	int instance;
> +	struct c_can_raminit raminit_sys;	/* RAMINIT via syscon regmap */
>  	void (*raminit) (const struct c_can_priv *priv, bool enable);
>  	u32 comm_rcv_high;
>  	u32 rxmasked;
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index 1546c2b..89739a1 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -32,14 +32,13 @@
>  #include <linux/clk.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>  
>  #include <linux/can/dev.h>
>  
>  #include "c_can.h"
>  
> -#define CAN_RAMINIT_START_MASK(i)	(0x001 << (i))
> -#define CAN_RAMINIT_DONE_MASK(i)	(0x100 << (i))
> -#define CAN_RAMINIT_ALL_MASK(i)		(0x101 << (i))
>  #define DCAN_RAM_INIT_BIT		(1 << 3)
>  static DEFINE_SPINLOCK(raminit_lock);
>  /*
> @@ -72,47 +71,61 @@ static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
>  	writew(val, priv->base + 2 * priv->regs[index]);
>  }
>  
> -static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
> -				  u32 val)
> +static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv,
> +					 u32 mask, u32 val)
>  {
>  	int timeout = 0;
> +	const struct c_can_raminit *raminit = &priv->raminit_sys;
> +	u32 ctrl;
> +
>  	/* We look only at the bits of our instance. */
>  	val &= mask;
> -	while ((readl(priv->raminit_ctrlreg) & mask) != val) {
> +	do {
>  		udelay(1);
>  		timeout++;
>  
> +		regmap_read(raminit->syscon, raminit->reg, &ctrl);
>  		if (timeout == 1000) {
>  			dev_err(&priv->dev->dev, "%s: time out\n", __func__);
>  			break;
>  		}
> -	}
> +	} while ((ctrl & mask) != val);
>  }
>  
> -static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
> +static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
>  {
> -	u32 mask = CAN_RAMINIT_ALL_MASK(priv->instance);
> +	u32 mask;
>  	u32 ctrl;
> +	const struct c_can_raminit *raminit = &priv->raminit_sys;
> +	u8 start_bit, done_bit;
> +
> +	start_bit = raminit->start_bit;
> +	done_bit = raminit->done_bit;
>  
>  	spin_lock(&raminit_lock);
>  
> -	ctrl = readl(priv->raminit_ctrlreg);
> +	mask = 1 << start_bit | 1 << done_bit;
> +	regmap_read(raminit->syscon, raminit->reg, &ctrl);
> +
>  	/* We clear the done and start bit first. The start bit is
>  	 * looking at the 0 -> transition, but is not self clearing;
>  	 * And we clear the init done bit as well.
> +	 * NOTE: DONE must be written with 1 to clear it.
>  	 */
> -	ctrl &= ~CAN_RAMINIT_START_MASK(priv->instance);
> -	ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
> -	writel(ctrl, priv->raminit_ctrlreg);
> -	ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
> -	c_can_hw_raminit_wait_ti(priv, mask, ctrl);
> +	ctrl &= ~(1 << start_bit);
> +	ctrl |= 1 << done_bit;
> +	regmap_write(raminit->syscon, raminit->reg, ctrl);
> +
> +	ctrl &= ~(1 << done_bit);
> +	c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
>  
>  	if (enable) {
>  		/* Set start bit and wait for the done bit. */
> -		ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
> -		writel(ctrl, priv->raminit_ctrlreg);
> -		ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
> -		c_can_hw_raminit_wait_ti(priv, mask, ctrl);
> +		ctrl |= 1 << start_bit;
> +		regmap_write(raminit->syscon, raminit->reg, ctrl);
> +
> +		ctrl |= 1 << done_bit;
> +		c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
>  	}
>  	spin_unlock(&raminit_lock);
>  }

My arm gcc-4.7.2 spits this warnings, I'll initialize ctrl to 0.

> drivers/net/can/c_can/c_can_platform.c: In function 'c_can_hw_raminit_wait_syscon':
> drivers/net/can/c_can/c_can_platform.c:92:17: warning: 'ctrl' may be used uninitialized in this function [-Wuninitialized]
> drivers/net/can/c_can/c_can_platform.c: In function 'c_can_hw_raminit_syscon':
> drivers/net/can/c_can/c_can_platform.c:115:7: warning: 'ctrl' is used uninitialized in this function [-Wuninitialized]

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux