* Felipe Balbi <balbi@xxxxxx> [141103 08:30]:
> by adding labels to DWC3 nodes, it's far easier
> for boards to reference them.
>
> Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Applying into omap-for-v3.19/dt, had to update it because
of "ARM: dts: DRA7: Move USB_OTG 4 to dra74x.dtsi". Updated
patch below.
Regards,
Tony
8< -------------------
From: Felipe Balbi <balbi@xxxxxx>
Date: Mon, 3 Nov 2014 10:28:42 -0600
Subject: [PATCH] arm: boot: dts: dra7: add labels to DWC3 nodes
by adding labels to DWC3 nodes, it's far easier
for boards to reference them.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
[tony@xxxxxxxxxxx: updated for otg 4 move to dra74x.dtsi]
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1219,7 +1219,7 @@
};
};
- omap_dwc3_1@48880000 {
+ omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
@@ -1240,7 +1240,7 @@
};
};
- omap_dwc3_2@488c0000 {
+ omap_dwc3_2: omap_dwc3_2@488c0000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
@@ -1262,7 +1262,7 @@
};
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- omap_dwc3_3@48900000 {
+ omap_dwc3_3: omap_dwc3_3@48900000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -46,7 +46,7 @@
};
ocp {
- omap_dwc3_4@48940000 {
+ omap_dwc3_4: omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
reg = <0x48940000 0x10000>;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
