Some SoCs e.g. (TI DRA7xx) need a START pulse to start the
RAMINIT sequence i.e. START bit must be set and cleared before
checking for the DONE bit status.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/net/can/c_can/c_can.h | 1 +
drivers/net/can/c_can/c_can_platform.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 0e17c7b..c6715ca 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -185,6 +185,7 @@ struct c_can_raminit {
unsigned int reg; /* register index within syscon */
u8 start_bit;
u8 done_bit;
+ bool needs_pulse;
};
/* c_can private data structure */
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 3776483..b838c6b 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -124,6 +124,12 @@ static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
ctrl |= 1 << start_bit;
regmap_write(raminit->syscon, raminit->reg, ctrl);
+ /* clear START bit if start pulse is needed */
+ if (raminit->needs_pulse) {
+ ctrl &= ~(1 << start_bit);
+ regmap_write(raminit->syscon, raminit->reg, ctrl);
+ }
+
ctrl |= 1 << done_bit;
c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
}
@@ -330,6 +336,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
raminit->start_bit = drvdata->raminit_start_bits[id];
raminit->done_bit = drvdata->raminit_done_bits[id];
+ raminit->needs_pulse = drvdata->raminit_pulse;
priv->raminit = c_can_hw_raminit_syscon;
} else {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
