* Pavel Machek <pavel@xxxxxx> [141113 08:23]: > Hi! > > > > I actually had pm=0 on the command line, but I removed it now, and no > > > change: [...] > > > > > > Let me try with explicit =1. .. aha, that helps. Thanks! > > > > mh seems I actually missed to make 1 the default value. I will > > prepare a patch for that. > > > > I assume, that the example ofono commands work for you now? > > Yes, it now works great. > > > > Do you have an example client that can talk to ofonod? > > > > I have not yet played with userland stuff. You could try > > telepathy-ring, which integrates the ofono into the telepathy > > framework. > > Ok, I took a look, and telepathy-ring is not in debian, and has > a lot of dependencies. > > OTOH ofono seems pretty reasonable. So I played a bit, and result > is python/pygtk gui which can receive an sms, initiate a call, and > report missed call. If someone wants to play, source is at > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone Pavel, care to fill in the the following type patch with some instructions in the description now that you got it working? I did not have luck yet when I tried. I got the /dev/cmt/* entries after adding pm=1 param, but no luck scanning any networks. Regards, Tony 8< ----------------- ARM: omap2plus_defconfig: Enable n900 modem as loadable modules --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -88,6 +88,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y +CONFIG_PHONET=m CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m @@ -158,6 +159,7 @@ CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y +CONFIG_USB_CDC_PHONET=m CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m @@ -197,6 +199,11 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y +CONFIG_HSI=m +CONFIG_OMAP_SSI=m +CONFIG_NOKIA_MODEM=m +CONFIG_SSI_PROTOCOL=m +CONFIG_HSI_CHAR=m CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y @@ -312,9 +319,11 @@ CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_ECM_SUBSET=y CONFIG_USB_CONFIGFS_RNDIS=y CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_PHONET=y CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_G_NOKIA=m CONFIG_MMC=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y @@ -359,6 +368,7 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
