Linux MMC Development

• Thread Index

• Re: [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.
  • From: J Freyensee <james_p_freyensee@xxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  • From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH] sdhci: pxav3 controller needs 32 bit ADMA addressing
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• [PATCH v3 1/6] arm: davinci: Fix low level gpio irq handlers' argument
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH v2] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v2] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• [PATCH] sdhci: If ADMA is broken try SDMA before PIO
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• damn slow SDHC card
  • From: Peter Warasin <peter@xxxxxxxxxx>
• RE: [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument
  • From: "Nori, Sekhar" <nsekhar@xxxxxx>
• Re: [PATCH V3] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [linux-pm] [PATCH]mmc: remove MMC bus legacy suspend/resume method
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH]mmc: remove MMC bus legacy suspend/resume method
  • From: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
• [PATCH] mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish
  • From: Aaron Lu <Aaron.Lu@xxxxxxx>
• [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v2 6/6] arm: davinci: DA850: Add wl1271/wlan support
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 5/6] arm: davinci: DA850: Add GPIO pinmux configuration for wl1271
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 4/6] arm: davinci: DA850: Add MMC/SD1 pinmux configuration
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 3/6] arm: davinci: mmc: Add support for set_power callback
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH v2 0/6] arm: davinci: DA850: wl12xx expansion card
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCHv4 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv4 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH V2] mmc: Bus width testing needs to handle suspend/resume
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v5] mmc: documentation of mmc non-blocking request usage and design.
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v9 00/12] use nonblock mmc requests to minimize latency
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH V2] mmc: sd.c Set Non Default Drive Strength via platform
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] MMC: OMAP: change HSMMC maintainence to Orphan
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH V3] MMC: PM: add suspend/resume in atmel-mci
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 0/2] mmc: sdhci-pci: add 8-bit bus width support for Medfield eMMCs
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: Fix return value in sdhci_s3c_suspend/resume()
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v5] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v5] mmc: documentation of mmc non-blocking request usage and design.
  • From: J Freyensee <james_p_freyensee@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH 5/5] arm: davinci: DA850: Add wl12xx expansion board support
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH 2/5] arm: davinci: Allow EVENTQ_0 as a default queue
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH 5/5] arm: davinci: DA850: Add wl12xx expansion board support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/5] arm: davinci: Allow EVENTQ_0 as a default queue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Will Newton <will.newton@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: Supply clocks for both host and card.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• RE: mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH] mmc: dw_mmc: Supply clocks for both host and card.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH V2] mmc: Bus width testing needs to handle suspend/resume
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 5/5] arm: davinci: DA850: Add wl12xx expansion board support
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH 4/5] arm: davinci: mmc: Add support for set_power callback
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH 3/5] arm: davinci: DA850: Set a default queue for CC1
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH 2/5] arm: davinci: Allow EVENTQ_0 as a default queue
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH 1/5] arm: davinci: Fix low level gpio irq handlers' argument
  • From: Ido Yariv <ido@xxxxxxxxxx>
• [PATCH 0/5] arm: davinci: DA850: wl12xx expansion board
  • From: Ido Yariv <ido@xxxxxxxxxx>
• Re: [PATCH 2/4] mmci: adjust calculation of f_min
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V2] mmc: Bus width testing needs to handle suspend/resume
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• mmc: sdhci: is d-cache flush required for read requests?
  • From: Bin Wang <arletoly@xxxxxxxxx>
• Re: [PATCH] ARM i.MX dma: Fix burstsize settings
  • From: Vinod Koul <vkoul@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/4] mmci: use StartBitErr to detect bad connections
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• RE: [PATCH V2] mmc: sd.c Set Non Default Drive Strength via platform
  • From: "Nath, Arindam" <Arindam.Nath@xxxxxxx>
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 3/4] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• RE: [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: Sebastian RASMUSSEN <sebastian.rasmussen@xxxxxxxxxxxxxx>
• Re: [PATCH v4] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• [PATCH v4] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• [PATCH V2] mmc: sd.c Set Non Default Drive Strength via platform
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH] ARM i.MX dma: Fix burstsize settings
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: Sebastian RASMUSSEN <sebastian.rasmussen@xxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• [PATCH v2 4/4] mmc: dw_mmc: reset FIFO after an error
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH v2 3/4] mmc: dw_mmc: handle "no CRC status" error
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH 2/4] mmc: dw_mmc: remove unnecessary error messages
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH v2 1/4] mmc: dw_mmc: fix stop when fallen back to PIO
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH v2 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] ARM i.MX dma: Fix burstsize settings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH V4] MMC: PM: add suspend/resume in atmel-mci
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V4] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• [PATCH v5] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• [PATCH] mmc: sd.c Set Non Default Drive Strength via platform
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v4] mmc: documentation of mmc non-blocking request usage and design.
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [PATCH v4] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v3] documentation of mmc non-blocking request
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v2] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v2] documentation of mmc non-blocking request
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCHv4 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: documentation of mmc non-blocking request usage and design.
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 0/3] Add device tree probe for sdhci-esdhc-imx
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH] mmc: documentation of mmc non-blocking request usage and design.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• OMAP HS-MMC: convert to dev_pm_ops broke hibernation
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• [PATCH] mmc: enable background operations for emmc4.41 with HPI support
  • From: Hanumath Prasad <hanumath.prasad@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] mmci: sync DATAEND irq with dma|pio transfer done
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] mmci: adjust calculation of f_min
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmci: use StartBitErr to detect bad connections
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] eSDHC: fix incorrect default value of the capabilities register on P4080
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [PATCH 2/3] eSDHC: Fix errors when booting kernel with fsl esdhc
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• [PATCH 2/3] eSDHC: Fix errors when booting kernel with fsl esdhc
  • From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
• [PATCH 3/3] eSDHC: fix incorrect default value of the capabilities register on P4080
  • From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
• [PATCH 1/3] eSDHC: Access Freescale eSDHC registers by 32-bit
  • From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
• Re: [PATCHv4 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH V3] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH V3] MMC: PM: add suspend/resume in atmel-mci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] MMC: OMAP: change HSMMC maintainence to Orphan
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• RE: mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: 전승원 <tgih.jun@xxxxxxxxxxx>
• Re: mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-esdhc: simplify cd_gpio, wp_gpio
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH 0/3] Add device tree probe for sdhci-esdhc-imx
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Is the mmc driver for Freescale MPC8313E broken?
  • From: Bear <jilingshu@xxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] mmc: sdhci-esdhc: OR mmc->caps with platform data caps
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] mmc: sdhci-esdhc: simplify cd_gpio, wp_gpio
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] OMAP: HSMMC maintainence
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] MMC: OMAP: change HSMMC maintainence to Orphan
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v9 00/12] use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 01/12] mmc: core: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 02/12] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 03/12] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 04/12] mmc: mmc_test: add debugfs file to list all tests
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 05/12] mmc: mmc_test: add test for non-blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 07/12] mmc: block: add member in mmc queue struct to hold request data
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 09/12] mmc: block: move error code in issue_rw_rq to a separate function.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 08/12] mmc: block: add a block request prepare function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 11/12] mmc: core: add random fault injection
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 10/12] mmc: queue: add a second mmc queue request member
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v9 06/12] mmc: mmc_test: test to measure how sg_len affect performance
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCHv4 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv4 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv4 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv4 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCHv3 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH] mxs-mmc: fix clock rate setting
  • From: Sachin Nikam <Snikam@xxxxxxxxxx>
• Re: [PATCH V2] MMC: PM: add suspend/resume in atmel-mci
  • From: Hans-Christian Egtvedt <hans-christian.egtvedt@xxxxxxxxx>
• Re: [PATCH V2] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v8 06/12] mmc: mmc_test: test to measure how sg_len affect performance
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v8 05/12] mmc: mmc_test: add test for non-blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• RE: [PATCH] mxs-mmc: fix clock rate setting
  • From: Sachin Nikam <Snikam@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv3 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH] OMAP: HSMMC maintainence
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• RE: [PATCH] mmc: dw_mmc: Supply clocks for both host and card.
  • From: 전승원 <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: 전승원 <tgih.jun@xxxxxxxxxxx>
• Re: Bus Width Testing on Suspend/Resume (REGRESSION)
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• [PATCH] mmc: avoid unnecessary rescan in PM_POST_SUSPEND
  • From: Jun Nie <niej0001@xxxxxxxxx>
• Bus Width Testing on Suspend/Resume (REGRESSION)
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCHv3 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP: HSMMC maintainence
  • From: <Chikkature@lina0132712>, <Rajashekar@lina0132712>, <Madhusudhan@lina0132712>, <madhu.cr@xxxxxx>
• Re: [PATCHv3 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCHv3 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv3 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv3 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv3 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH] mmc: tmio: Fix race condition resulting in spurious interrupts
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mxs-mmc: fix clock rate setting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mmci: fixup sg buffer handling in pio_write
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2] MMC: PM: add suspend/resume in atmel-mci
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• [PATCH V2] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• [PATCH] mxs-mmc: fix clock rate setting
  • From: Koen Beel <koen.beel.barco@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: James Hogan <james@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: James Hogan <james@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH] mmc: tmio: fix build error if CONFIG_MMC_SDHI is not configured
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH] mmc: dw_mmc: Supply clocks for both host and card.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• [PATCH] mmc: tmio: fix build error if CONFIG_MMC_SDHI is not configured
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• [PATCH] mmc: dw_mmc: Add the function call for board-specific initialization.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: Supply clocks for both host and card.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [RFC] How working MMC_BUS_WIDTH_TEST??
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 2/2] MMC: remove EXPERIMENTAL from the DMA selection of atmel-mci
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• [PATCH 2/2] mmc: sdhci-pci: allow 8-bit bus width for Intel Medfield eMMCs
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 1/2] mmc: sdhci-pci: add 8-bit bus width support for mrst hc0
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 0/2] mmc: sdhci-pci: add 8-bit bus width support for Medfield eMMCs
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: Will Newton <will.newton@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• [PATCH 4/4] mmc: dw_mmc: reset FIFO after an error
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 3/4] mmc: dw_mmc: handle "no CRC status" error
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 2/4] mmc: dw_mmc: remove unnecessary error messages
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 1/4] mmc: dw_mmc: fix stop when fallen back to PIO
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 0/4] mmc: dw_mmc: mmc_test related fixes
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: mmc_test Correct xfer_size at write
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [RFC] How working MMC_BUS_WIDTH_TEST??
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [RFC] How working MMC_BUS_WIDTH_TEST??
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH] mmc: sdhci-s3c: Fix return value in sdhci_s3c_suspend/resume()
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC] How working MMC_BUS_WIDTH_TEST??
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• [PATCHv2 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv2 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv2 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCHv2 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: mmc_test Correct xfer_size at write
  • From: Pierre Ossman <pierre@xxxxxxxxx>
• [PATCH 0/2] maximum discard size
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 2/2] mmc: sdhci: specify maximum discard timeout
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 1/2] mmc: queue: let host controllers specify maximum discard timeout
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC] How working MMC_BUS_WIDTH_TEST??
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• mmc_test Correct xfer_size at write
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• mmc_test Correct xfer_size at write
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH v8 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• [PATCH v8 02/12] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 04/12] mmc: mmc_test: add debugfs file to list all tests
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 11/12] mmc: core: add random fault injection
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 10/12] mmc: queue: add a second mmc queue request member
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 09/12] mmc: block: move error code in issue_rw_rq to a separate function.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 08/12] mmc: block: add a block request prepare function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 07/12] mmc: block: add member in mmc queue struct to hold request data
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 06/12] mmc: mmc_test: test to measure how sg_len affect performance
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 05/12] mmc: mmc_test: add test for non-blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 03/12] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 01/12] mmc: core: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH 2/4] mmci: adjust calculation of f_min
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 0/4] MMCI patches for 3.1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 3/4] mmci: sync DATAEND irq with dma|pio transfer done
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 4/4] mmci: fixup sg buffer handling in pio_write
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 1/4] mmci: use StartBitErr to detect bad connections
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: saeed bishara <saeed.bishara@xxxxxxxxx>
• Re: -ENOSYS suspend-powerdown regression
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• RE: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Vijaya Kumar K-1 <vijay.kilari@xxxxxxxxxxxxxx>
• [GIT PULL] MMC fixes for 3.0-rc5
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: saeed bishara <saeed.bishara@xxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: fix runtime PM path during driver removal
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: fix runtime PM path during driver removal
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 0/4] Minor MMC fixes
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 18/35] drivers/mmc changes for SMBIOS and System Firmware
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH 0/6] mmc: dw_mmc: misc fixes and improvements
  • From: Will Newton <will.newton@xxxxxxxxx>
• Re: [PATCH 00/35]: System Firmware and SMBIOS Support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 6/6] mmc: dw_mmc: handle unaligned buffers and sizes
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 5/6] mmc: dw_mmc: don't hard code fifo depth, fix usage
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 3/6] mmc: dw_mmc: convert card tasklet to workqueue
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 4/6] mmc: dw_mmc: brackets in register access macros
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 2/6] mmc: dw_mmc: fix race with request and removal
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 1/6] mmc: dw_mmc: clear TXDR/RXDR ints before enabling
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 0/6] mmc: dw_mmc: misc fixes and improvements
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH 3/4] mmc: queue: append partition subname to queue thread name
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] pm: move pm notifiers into suspend.h
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH 4/5] pm: move pm notifiers into suspend.h
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 4/4] mmc: queue: bring discard_granularity/alignment into line with SCSI definitions
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 3/4] mmc: queue: append partition subname to queue thread name
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 2/4] mmc: core: make erase timeout calculation allow for gated clock
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 1/4] mmc: block: switch card to User Data Area when removing the block driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 0/4] Minor MMC fixes
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 4/5] pm: move pm notifiers into suspend.h
  • From: Cong Wang <amwang@xxxxxxxxxx>
• [RFC] sdhci: suspend code correct ?
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH 4/5] pm: move pm notifiers into suspend.h
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 3/3] MMC: OMAP: HSMMC: Remove unused iclk
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/3] OMAP: HSMMC: cleanup and runtime pm
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 1/3] MMC: OMAP: HSMMC: Remove lazy_disable
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH v7 03/11] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 4/5] pm: move pm notifiers into suspend.h
  • From: Amerigo Wang <amwang@xxxxxxxxxx>
• Re: [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 04/11] mmc: mmc_test: add debugfs file to list all tests
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 05/11] mmc: mmc_test: add test for non-blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 06/11] mmc: add member in mmc queue struct to hold request data
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 07/11] mmc: add a block request prepare function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 10/11] mmc: test: add random fault injection in core.c
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 09/11] mmc: add a second mmc queue request member
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 08/11] mmc: move error code in mmc_block_issue_rw_rq to a separate function.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 03/11] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 01/11] mmc: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v7 00/11] use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: [PATCH] cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  • From: James Hogan <james@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 0/3] Improve MMC error handling (3rd rev)
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• Re: [PATCH] cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v4 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v4 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH 0/3] Improve MMC error handling (3rd rev)
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• Re: [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: mach-shmobile: ag5evm: consistently name sdhi info structures
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• [PATCH] mmc: sdhci-pxa move platform data to include/linux/platform_data
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 5/5] ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 2/5] mmc: tmio: Share register access functions
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 1/5] mmc: tmio: name 0xd8 as CTL_DMA_ENABLE
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 4/5] ARM: mach-shmobile: ag5evm: consistently name sdhi info structures
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 0/5 v2] mmc: sdhi: Allow waiting for idle
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 3/4] PCI: make SRIOV resources nice-to-have
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• [PATCH 4/4] PCI: make cardbus-bridge resources nice-to-have
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• [PATCH 2/4] PCI : ability to resize assigned pci-resource
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• [PATCH 1/4] PCI: honor child buses add_size in hot plug configuration
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• [PATCH 0/4] PCI: fix cardbus and sriov regressions
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• Re: SDHCI I/O errors
  • From: Andrew Lutomirski <luto@xxxxxxx>
• Re: SDHCI I/O errors
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: SDHI: DMA slave ID 0 is invalid
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: [PATCH 0/3] Improve MMC error handling (3rd rev)
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: SDHCI I/O errors
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: tmio: fix regression: restore TMIO_MMC_WRPROTECT_DISABLE handling
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH 3/3] MMC: add checking of r/w command response
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] MMC: improve error recovery from command channel errors
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] MMC: allow get_card_status() to return error status
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 0/3] Improve MMC error handling (3rd rev)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: protect a sequence of request and request-done.
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: set the card_width bit per card.
  • From: Chris Ball <cjb@xxxxxxxxxx>
• SDHCI I/O errors
  • From: Andrew Lutomirski <luto@xxxxxxx>
• Re: [PATCH] mmc: sdhci-pxa move platform data to include/linux/platform_data
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-pxa move platform data to include/linux/platform_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v2] mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: SDHI: DMA slave ID 0 is invalid
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: tmio: fix regression: restore TMIO_MMC_WRPROTECT_DISABLE handling
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: sdhci-pxa move platform data to include/linux/platform_data
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: set the card_width bit per card.
  • From: Will Newton <will.newton@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: protect a sequence of request and request-done.
  • From: Will Newton <will.newton@xxxxxxxxx>
• [PATCH] mmc: dw_mmc: set the card_width bit per card.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: protect a sequence of request and request-done.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/3] MMC: Fix checkpatch complaints about long lines
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH] mmc: add dependence in Kconfig for pxav2/pxav3
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• [PATCH 5/5] ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 2/5] mmc: tmio: Share register access functions
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 0/5] mmc: sdhi: Allow waiting for idle
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 3/5] mmc: sdhi: Add write16_hook
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 4/5] ARM: mach-shmobile: ag5evm: consistently name sdhi info structures
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 1/5] mmc: tmio: name 0xd8 as CTL_DMA_ENABLE
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 10/11] mmc: test: add random fault injection in core.c
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 09/11] mmc: add a second mmc queue request member
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 08/11] mmc: move error code in mmc_block_issue_rw_rq to a separate function.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 07/11] mmc: add a block request prepare function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 06/11] mmc: add member in mmc queue struct to hold request data
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 05/11] mmc: mmc_test: add test for non-blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 04/11] mmc: mmc_test: add debugfs file to list all tests
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 03/11] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 01/11] mmc: add non-blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: Fix checkpatch complaints about long lines
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MMC: Fix checkpatch warnings
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MMC: Fix checkpatch errors
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND] omap_hsmmc: use original sg_len for dma_unmap_sg
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2] omap: hsmmc: fix ocr mask usage
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v4 0/5] Provide sdhci driver for mmp2 and pxa9xx
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH v5 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 05/12] mmc: mmc_test: add debugfs file to list all tests
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 06/12] mmc: mmc_test: add test for none blocking transfers
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 09/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function.
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 08/12] mmc: add a block request prepare function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 11/12] mmc: test: add random fault injection in core.c
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 10/12] mmc: add a second mmc queue request member
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 12/12] mmc: add handling for two parallel block requests in issue_rw_rq
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 07/12] mmc: add member in mmc queue struct to hold request data
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 04/12] mmci: implement pre_req() and post_req()
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 03/12] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• [PATCH v5 01/12] mmc: add none blocking mmc request function
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v5 00/12] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 3/3] MMC: Fix checkpatch complaints about long lines
  • From: Sebastian Rasmussen <sebras@xxxxxxxxx>
• [PATCH 2/3] MMC: Fix checkpatch warnings
  • From: Sebastian Rasmussen <sebras@xxxxxxxxx>
• [PATCH 1/3] MMC: Fix checkpatch errors
  • From: Sebastian Rasmussen <sebras@xxxxxxxxx>
• [PATCH] mmci: Fix checkpatch warnings
  • From: Sebastian Rasmussen <sebras@xxxxxxxxx>
• RE: SD8686 fast power-cycle problems
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: SD8686 fast power-cycle problems
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• [PATCH RESEND] omap_hsmmc: use original sg_len for dma_unmap_sg
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• SD8686 fast power-cycle problems
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [PATCH v4 00/12] mmc: use nonblock mmc requests to minimize latency
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v4 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: [PATCH v4 03/12] omap_hsmmc: add support for pre_req and post_req
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• RE: UHS-I bus speed mode should be set last in UHS initialization
  • From: "Nath, Arindam" <Arindam.Nath@xxxxxxx>
• [PATCH v2 4/4 RESEND] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH V2] mmc: Enable the ADMA on esdhc imx driver
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: UHS-I bus speed mode should be set last in UHS initialization
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH v4 00/12] mmc: use nonblock mmc requests to minimize latency
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH v4 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH v4 03/12] omap_hsmmc: add support for pre_req and post_req
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH V2] mmc: Enable the ADMA on esdhc imx driver
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: sdhci-esdhc-imx -- MMC 10x slower than it should be
  • From: Pavel Machek <pma@xxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V2] mmc: Enable the ADMA on esdhc imx driver
  • From: Pavel Machek <pma@xxxxxxxxx>
• Re: [PATCH v2 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V2] mmc: Enable the ADMA on esdhc imx driver
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V2] mmc: Enable the ADMA on esdhc imx driver
  • From: Pavel Machek <pma@xxxxxxxxx>
• Re: [PATCH v2] omap: hsmmc: fix ocr mask usage
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [PATCH v3] dmaengine: add new dma API for max_segment_number
  • From: Per Forlin <per.forlin@xxxxxxxxxx>
• Re: sdhci-pci fails on 3.0.0-rc1 on Dell E6510
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH] mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v3] dmaengine: add new dma API for max_segment_number
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• [Question] mmc : block.c what will be done in the block layer after __blk_end_request(req, -EIO, brq.data.blksz)
  • From: "uulinux" <uulinux@xxxxxxxxx>
• Re: [PATCH/RFC] mmc: ignore asynchronous calls on dead buses
  • From: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
• [PATCH] mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH/RFC] mmc: ignore asynchronous calls on dead buses
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: sdhci-esdhc-imx -- MMC 10x slower than it should be
  • From: Pavel Machek <pma@xxxxxxxxx>
• [PATCH v3] dmaengine: add new dma API for max_segment_number
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: sdhci-esdhc-imx -- MMC 10x slower than it should be
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• [PATCH v2 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: sdhci-esdhc-imx -- MMC 10x slower than it should be
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• sdhci-esdhc-imx -- MMC 10x slower than it should be
  • From: Pavel Machek <pma@xxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• RE: UHS-I bus speed mode should be set last in UHS initialization
  • From: "Nath, Arindam" <Arindam.Nath@xxxxxxx>
• RE: UHS-I bus speed mode should be set last in UHS initialization
  • From: <subhashj@xxxxxxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• RE: Resume issue with brcmfmac *not* loaded
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• RE: Resume issue with brcmfmac *not* loaded
  • From: "Sukesh Srikakula" <sukeshs@xxxxxxxxxxxx>
• RE: Resume issue with brcmfmac *not* loaded
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• Re: [PATCH v4 2/5] mmc: support sdhci-pxav2.c
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [PATCH v2] omap: hsmmc: fix ocr mask usage
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• RE: UHS-I bus speed mode should be set last in UHS initialization
  • From: "Nath, Arindam" <Arindam.Nath@xxxxxxx>
• Re: [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v4 2/5] mmc: support sdhci-pxav2.c
  • From: zhangfei gao <zhangfei.gao@xxxxxxxxx>
• Re: Resume issue with brcmfmac *not* loaded
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: Resume issue with brcmfmac *not* loaded
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: [PATCH v4 2/5] mmc: support sdhci-pxav2.c
  • From: Philip Rakity <prakity@xxxxxxxxxxx>
• Resume issue with brcmfmac *not* loaded
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: reset card during power_restore
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: Support for NetXtreme BCM57765 Memory Card Reader?
  • From: René Köcher <shirk@xxxxxxxxxxx>
• Re: sdhci-pci fails on 3.0.0-rc1 on Dell E6510
  • From: Ram Pai <linuxram@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: Support for NetXtreme BCM57765 Memory Card Reader?
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Support for NetXtreme BCM57765 Memory Card Reader?
  • From: René Köcher <shirk@xxxxxxxxxxx>