Re: [PATCH 1/1] mmc: Support of SDIO irq for dw_mmc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On 23 August 2011 09:38, Shashidhar Hiremath
<shashidharh@xxxxxxxxxxxxxxx> wrote:
> Resending the patch in plain  text format.
>
>
>
> The Patch adds the support for SDIO interrupts for all slots.
> It includes enabling of SDIO interrupts through dw_mci_enable_sdio_irq
> and the handling of the slot specific interrupts in the Interrupt Service
> Routine.
>
> Signed-off-by: shashidhar Hiremath <shashidharh@xxxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/dw_mmc.c |   37 +++++++++++++++++++++++++++++++++----
>  drivers/mmc/host/dw_mmc.h |    2 +-
>  2 files changed, 34 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 66dcddb..00f207a 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -746,11 +746,31 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
>        return present;
>  }
>
> +static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
> +{
> +       struct dw_mci_slot *slot = mmc_priv(mmc);
> +       struct dw_mci *host = slot->host;
> +       u32 int_mask;
> +
> +       /* Enable/disable Slot Specific SDIO interrupt */
> +       int_mask = mci_readl(host, INTMASK);
> +       if (enb) {
> +               /* Dont disturb the Non-SDIO Interrupts */
> +               int_mask &= 0xFFFF;

this will disable the interrupts of all other slots, which doesn't seem right.

> +               mci_writel(host, INTMASK, (int_mask | (1 << (slot->id + 16))));

you could use 1 << SDMMC_INT_SDIO(slot->id) here

> +       } else {
> +               /* Dont disturb the SDIO Interrupts */
> +               int_mask &= 0xFFFF0000;

similarly this would disable all normal interrupts which doesn't seem right.

> +               mci_writel(host, INTMASK, (0 << (slot->id + 16)));

This just looks wrong
1) you're not using int_mask anyway
2) you're shifting the value 0, so the result is all interrupts disabled

i guess you want something like "int_mask & ~(1 << SDMMC_INT_SDIO(slot->id))"

> +       }
> +}
> +
>  static const struct mmc_host_ops dw_mci_ops = {
> -       .request        = dw_mci_request,
> -       .set_ios        = dw_mci_set_ios,
> -       .get_ro         = dw_mci_get_ro,
> -       .get_cd         = dw_mci_get_cd,
> +       .request                = dw_mci_request,
> +       .set_ios                = dw_mci_set_ios,
> +       .get_ro                 = dw_mci_get_ro,
> +       .get_cd                 = dw_mci_get_cd,
> +       .enable_sdio_irq        = dw_mci_enable_sdio_irq,
>  };
>
>  static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
> @@ -1179,6 +1199,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>        struct dw_mci *host = dev_id;
>        u32 status, pending;
>        unsigned int pass_count = 0;
> +       int i;
>
>        do {
>                status = mci_readl(host, RINTSTS);
> @@ -1249,6 +1270,14 @@ static irqreturn_t dw_mci_interrupt(int irq,
> void *dev_id)
>                        tasklet_schedule(&host->card_tasklet);
>                }
>
> +               /* Handle SDIO Interrupts */
> +               for (i = 0; i < host->num_slots; i++) {
> +                       struct dw_mci_slot *slot = host->slot[i];
> +                       if (pending & SDMMC_INT_SDIO(i)) {
> +                               mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
> +                               mmc_signal_sdio_irq(slot->mmc);
> +                       }
> +               }
>        } while (pass_count++ < 5);
>
>  #ifdef CONFIG_MMC_DW_IDMAC
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 23c662a..ecf1043 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -82,7 +82,7 @@
>  #define SDMMC_CTYPE_4BIT               BIT(0)
>  #define SDMMC_CTYPE_1BIT               0
>  /* Interrupt status & mask register defines */
> -#define SDMMC_INT_SDIO                 BIT(16)
> +#define SDMMC_INT_SDIO(n)              BIT((16 + (n)))
>  #define SDMMC_INT_EBE                  BIT(15)
>  #define SDMMC_INT_ACD                  BIT(14)
>  #define SDMMC_INT_SBE                  BIT(13)

Cheers
-- 
James Hogan
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux