Re: [PATCH v2 1/1] mmc: Support of DUAL BUFFER DESC[ring] mode for dw_mmc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm afraid no .The patch has not been tested.As you suggested. I will
test the Patch.
I have sent the modified Patch with version3.But, for some reason,the
patch has appeared in this current  mail thread only.Can you please
review it and suggest changes if any ?

On Tue, Aug 30, 2011 at 7:05 PM, James Hogan <james.hogan@xxxxxxxxxx> wrote:
> Hi Shashidhar,
>
> Has the patch been tested to check the dual buffer code gets hit (i.e.
> it doesn't always get given just single buffers) and that it still works?
>
> mmc_test might be a good way of doing so if you have a spare sd card
> that you don't mind getting wiped, and I believe it does performance
> measurements too which is a bonus.
>
> Cheers
> James
>
> On 08/30/2011 10:23 AM, Shashidhar Hiremath wrote:
>> Hi Kyungmin ,
>>   I have actually not tested ,though I believe Dual Buffer Mode will
>> improve performance by certain extent.The main reason for adding his
>> patch is since the hardware supports different modes for IDMAC data
>> transfer.I thought it would be better to have the support in the
>> driver.I will surely comeback with statistics on performance
>> improvement soon after testing it.
>>
>> On Tue, Aug 30, 2011 at 2:05 PM, Kyungmin Park <kmpark@xxxxxxxxxxxxx> wrote:
>>> Hi Shashidhar,
>>>
>>> Simple question, what's the performance or latency improvement by this patch?
>>> IOW, what's the benefits? can you provide any performance results or
>>> similar things?
>>>
>>> Thank you,
>>> Kyungmin Park
>>>
>>> On Tue, Aug 30, 2011 at 5:29 PM, Shashidhar Hiremath
>>> <shashidharh@xxxxxxxxxxxxxxx> wrote:
>>>> This Patch adds the support for Dual Buffer Descriptor mode of
>>>> Operation for the dw_mmc driver.The patch also provides the configurability
>>>> Option for choosing DUAL_BUFFER mode or the chained modes through menuconfig.
>>>> The Menuconfig option for selecting Dual Buffer mode or chained mode
>>>> is selected only if Internal DMAC is enabled.
>>>>
>>>> Signed-off-by: Shashidhar Hiremath <shashidharh@xxxxxxxxxxxxxxx>
>>>> ---
>>>> v2:
>>>> * As per suggestions by Will Newton and James Hogan
>>>> -Config symbol Names prefixed with MMC_DW
>>>> -Added more Description for Config parameters added
>>>> -Removed unnecessary config opion IDMAC_DESC_MODE
>>>> -IDMAC_SET_BUFFER_SIZE chenged IDMAC_SET_BUFFER_SIZES
>>>> -fixed typos and indented commments correctly
>>>> -if ((i +1) <= sg_len changed to ((i +1) < sg_len
>>>> -duplication "desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC" line removed
>>>> -fixed bug in making DSL value zero
>>>> -removed ANDing the des1 with zero before writing buffer lengths to it
>>>> -Added proper multiline comments
>>>> ---
>>>>  drivers/mmc/host/Kconfig  |   19 +++++++++++++++++
>>>>  drivers/mmc/host/dw_mmc.c |   49 +++++++++++++++++++++++++++++++++++---------
>>>>  drivers/mmc/host/dw_mmc.h |    2 +
>>>>  3 files changed, 60 insertions(+), 10 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>>> index 8c87096..1e20dfa 100644
>>>> --- a/drivers/mmc/host/Kconfig
>>>> +++ b/drivers/mmc/host/Kconfig
>>>> @@ -534,6 +534,25 @@ config MMC_DW_IDMAC
>>>>          Designware Mobile Storage IP block. This disables the external DMA
>>>>          interface.
>>>>
>>>> +choice
>>>> +       prompt "select  IDMAC Descriptors Mode"
>>>> +       depends on MMC_DW_IDMAC
>>>> +
>>>> +config MMC_DW_CHAIN_DESC
>>>> +       bool "Chain Descriptor Structure"
>>>> +       help
>>>> +         Select this option to enable Chained Mode of Operation and the
>>>> +         Chained Mode operates in a mode where only one Buffer will be used
>>>> +         for each descriptor when the transfer is happening in DMA mode.
>>>> +
>>>> +config MMC_DW_DUAL_BUFFER_DESC
>>>> +       bool "Dual Buffer Descriptor Structure"
>>>> +       help
>>>> +         Select this option to enable Dual Buffer Desc Mode of Operation and
>>>> +         Dual Buffer Descriptor Mode or the Ring Mode indicates that two
>>>> +         buffers can be used for each descriptor during DMA mode transfer.
>>>> +endchoice
>>>> +
>>>>  config MMC_SH_MMCIF
>>>>        tristate "SuperH Internal MMCIF support"
>>>>        depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
>>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>>> index ff0f714..ee02208 100644
>>>> --- a/drivers/mmc/host/dw_mmc.c
>>>> +++ b/drivers/mmc/host/dw_mmc.c
>>>> @@ -63,6 +63,9 @@ struct idmac_desc {
>>>>        u32             des1;   /* Buffer sizes */
>>>>  #define IDMAC_SET_BUFFER1_SIZE(d, s) \
>>>>        ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
>>>> +#define IDMAC_SET_BUFFER_SIZES(d, s1, s2) \
>>>> +       ((d)->des1 = (((d)->des1)  | \
>>>> +       (((s1) & 0x1fff) | ((s2) & 0x1fff << 13))))
>>>>
>>>>        u32             des2;   /* buffer 1 physical address */
>>>>
>>>> @@ -348,17 +351,38 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>>>>        struct idmac_desc *desc = host->sg_cpu;
>>>>
>>>>        for (i = 0; i < sg_len; i++, desc++) {
>>>> -               unsigned int length = sg_dma_len(&data->sg[i]);
>>>> -               u32 mem_addr = sg_dma_address(&data->sg[i]);
>>>> +               /* Length and mem_address of first buffer */
>>>> +               unsigned int length1 = sg_dma_len(&data->sg[i]);
>>>> +               u32 mem_addr1 = sg_dma_address(&data->sg[i]);
>>>> +#ifdef CONFIG_DUAL_BUFFER_DESC
>>>> +               unsigned int length2;
>>>> +               u32 mem_addr2;
>>>>
>>>> -               /* Set the OWN bit and disable interrupts for this descriptor */
>>>> +               /*
>>>> +                * Set the OWN bit and disable interrupts
>>>> +                * for this descriptor
>>>> +                */
>>>> +               desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC
>>>> +               if ((i+1) < sg_len) {
>>>> +                       length2 = sg_dma_len(&data->sg[i+1]);
>>>> +                       mem_addr2 = sg_dma_address(&data->sg[i+1]);
>>>> +                       /* Buffer length being set for Buffer1 and Buffer2 */
>>>> +                       IDMAC_SET_BUFFER_SIZES(desc, length1, length2);
>>>> +                       desc->des3 = mem_addr2;
>>>> +                       /* Incrementing for the second buffer */
>>>> +                       i++;
>>>> +               } else {
>>>> +                       /* Buffer length being set for Buffer1 and Buffer2 */
>>>> +                       IDMAC_SET_BUFFER_SIZES(desc, length1, 0);
>>>> +               }
>>>> +#elif CONFIG_CHAIN_DESC
>>>> +               /* Set OWN bit and disable interrupts for this descriptor */
>>>>                desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
>>>> -
>>>> -               /* Buffer length */
>>>> -               IDMAC_SET_BUFFER1_SIZE(desc, length);
>>>> -
>>>> +               /* Buffer length for Buffer1 */
>>>> +               IDMAC_SET_BUFFER1_SIZE(desc, length1);
>>>> +#endif
>>>>                /* Physical address to DMA to/from */
>>>> -               desc->des2 = mem_addr;
>>>> +               desc->des2 = mem_addr1;
>>>>        }
>>>>
>>>>        /* Set first descriptor */
>>>> @@ -369,6 +393,10 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>>>>        desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
>>>>        desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
>>>>        desc->des0 |= IDMAC_DES0_LD;
>>>> +#ifdef CONFIG_DUAL_BUFFER_DESC
>>>> +       /* Set the End of Ring bit */
>>>> +       desc->des0 |= IDMAC_DES0_ER;
>>>> +#endif
>>>>
>>>>        wmb();
>>>>  }
>>>> @@ -388,7 +416,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>>>
>>>>        /* Enable the IDMAC */
>>>>        temp = mci_readl(host, BMOD);
>>>> -       temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
>>>> +       /* The Descriptor Skip length is made zero */
>>>> +       temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB | SDMMC_BMOD_DSL(0);
>>>>        mci_writel(host, BMOD, temp);
>>>>
>>>>        /* Start it running */
>>>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>>>> index 027d377..0520dc8 100644
>>>> --- a/drivers/mmc/host/dw_mmc.h
>>>> +++ b/drivers/mmc/host/dw_mmc.h
>>>> @@ -72,6 +72,8 @@
>>>>  /* Clock Enable register defines */
>>>>  #define SDMMC_CLKEN_LOW_PWR            BIT(16)
>>>>  #define SDMMC_CLKEN_ENABLE             BIT(0)
>>>> +/* BMOD register defines */
>>>> +#define SDMMC_BMOD_DSL(n)              _SBF(2, (n))
>>>>  /* time-out register defines */
>>>>  #define SDMMC_TMOUT_DATA(n)            _SBF(8, (n))
>>>>  #define SDMMC_TMOUT_DATA_MSK           0xFFFFFF00
>>>> --
>>>> 1.7.2.3
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>
>>
>>
>
>



-- 
regards,
Shashidhar Hiremath
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux