Hi Chuanxiao. Thank you for your comment. Right, you mentioned, including some case should be better. So i will send some patch for the case that use HPI command. Regards, Jaehoon Chung Dong, Chuanxiao wrote: > Hi Chung, > Glad to see HPI command is useful in our MMC stack. :) > If this patch can also include a case which uses mmc_interrupt_hpi function, that would be better. > >> -----Original Message----- >> From: linux-mmc-owner@xxxxxxxxxxxxxxx >> [mailto:linux-mmc-owner@xxxxxxxxxxxxxxx] On Behalf Of Jaehoon Chung >> Sent: Monday, August 08, 2011 2:29 PM >> To: linux-mmc@xxxxxxxxxxxxxxx >> Cc: Chris Ball; Dong, Chuanxiao; Kyungmin Park; Hanumath Prasad; >> svenkatr@xxxxxx >> Subject: [PATCH] mmc: support HPI send command >> >> HPI command is defined in eMMC4.41. >> We didn't use this command. >> But maybe we need to use HPI command for using eMMC4.5 feature. >> >> Many patches related with HPI sent to mailing. >> (This patch is based on Chuanxiao's patch.) >> But this patch is added sending function for HPI command. >> >> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> >> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx> >> CC: Hanumath Prasad <hanumath.prasad@xxxxxxxxxxxxxx> >> >> --- >> drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++++ >> drivers/mmc/core/mmc.c | 37 >> ++++++++++++++++++++++++++++++++++++- >> drivers/mmc/core/mmc_ops.c | 31 +++++++++++++++++++++++++++++++ >> drivers/mmc/core/mmc_ops.h | 1 + >> include/linux/mmc/card.h | 4 ++++ >> include/linux/mmc/core.h | 1 + >> include/linux/mmc/mmc.h | 3 +++ >> 7 files changed, 104 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >> index f091b43..a20ff75 100644 >> --- a/drivers/mmc/core/core.c >> +++ b/drivers/mmc/core/core.c >> @@ -346,6 +346,34 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct >> mmc_command *cmd, int retries >> >> EXPORT_SYMBOL(mmc_wait_for_cmd); >> >> +int mmc_interrupt_hpi(struct mmc_card *card) >> +{ >> + int err; >> + u32 status; >> + >> + BUG_ON(!card); >> + >> + if (!card->ext_csd.hpi_en) { >> + printk(KERN_INFO "Didn't set HPI enable bit!\n"); >> + return 0; >> + } >> + >> + err = mmc_send_status(card, &status); >> + if (err) >> + return err; >> + >> + /* If Card status is prg-state, can send HPI command */ > Yes, this is right. Before sending HPI command, the card should be in prg-state. But, > >> + if (R1_CURRENT_STATE(status) == 7) { >> + err = mmc_send_hpi_cmd(card, &status); >> + if (err) >> + return err; > When sending HPI command to card, maybe the card is already out of prg-state. This implementation cannot make sure when sending HPI command, card is actually in prg-state. > So if card is already not in prg-state, then you will get some error. For sdhci host controller, response timeout error will be returned back. So here driver may return with error. > Suggest to add some error handling in mmc_send_hpi_cmd to avoid this. If the error is caused by improper scenario of sending HPI command, then we can ignore this. > What do you think? > >> + } >> + >> + return 0; >> + >> +} >> +EXPORT_SYMBOL(mmc_interrupt_hpi); >> + >> /** >> * mmc_set_data_timeout - set the timeout for a data command >> * @data: data phase for command >> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >> index 5700b1c..c51ae8c 100644 >> --- a/drivers/mmc/core/mmc.c >> +++ b/drivers/mmc/core/mmc.c >> @@ -402,8 +402,26 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 >> *ext_csd) >> ext_csd[EXT_CSD_TRIM_MULT]; >> } >> >> - if (card->ext_csd.rev >= 5) >> + if (card->ext_csd.rev >= 5) { >> + /* check whether the eMMC card support HPI */ >> + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { >> + card->ext_csd.hpi = 1; >> + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) >> + card->ext_csd.hpi_cmd = >> + MMC_STOP_TRANSMISSION; >> + else >> + card->ext_csd.hpi_cmd = >> + MMC_SEND_STATUS; >> + >> + /* >> + * Indicate the maximum timeout to close >> + * a command interrupted by HPI >> + */ >> + card->ext_csd.out_of_int_time = >> + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; >> + } >> card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; >> +} >> >> if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) >> card->erased_byte = 0xFF; >> @@ -726,6 +744,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, >> } >> >> /* >> + * Enable HPI feature (if supported) >> + */ >> + if (card->ext_csd.hpi) { >> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, >> + EXT_CSD_HPI_MGMT, 1, 0); >> + if (err && err != -EBADMSG) >> + goto free_card; >> + >> + if (err) { >> + printk(KERN_WARNING "%s: Enabling HPI failed\n", >> + mmc_hostname(card->host)); >> + err = 0; >> + } else >> + card->ext_csd.hpi_en = 1; >> + } >> + >> + /* >> * Compute bus speed. >> */ >> max_dtr = (unsigned int)-1; >> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c >> index 845ce7c..f111907 100644 >> --- a/drivers/mmc/core/mmc_ops.c >> +++ b/drivers/mmc/core/mmc_ops.c >> @@ -547,3 +547,34 @@ int mmc_bus_test(struct mmc_card *card, u8 bus_width) >> err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width); >> return err; >> } >> + >> +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status) >> +{ >> + struct mmc_command cmd; >> + unsigned int opcode; >> + unsigned int flags; >> + int err; >> + >> + opcode = card->ext_csd.hpi_cmd; >> + if (opcode == MMC_STOP_TRANSMISSION) >> + flags = MMC_RSP_R1B | MMC_CMD_AC; >> + else if (opcode == MMC_SEND_STATUS) >> + flags = MMC_RSP_R1 | MMC_CMD_AC; >> + >> + memset(&cmd, 0, sizeof(struct mmc_command)); >> + cmd.opcode = opcode; >> + cmd.arg = card->rca << 16 | 1; >> + cmd.flags = flags; >> + cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time; >> + >> + err = mmc_wait_for_cmd(card->host, &cmd, 0); >> + if (err) { > This error may caused by improper scenario of sending HPI command. But not some response or data error. > > Thanks > Chuanxiao > >> + printk(KERN_ERR "error %d interrupting operation" >> + "HPI command response %#x\n", >> + err, cmd.resp[0]); >> + return err; >> + } >> + if (status) >> + *status = cmd.resp[0]; >> + return 0; >> +} >> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h >> index 9276946..2a6e0db 100644 >> --- a/drivers/mmc/core/mmc_ops.h >> +++ b/drivers/mmc/core/mmc_ops.h >> @@ -17,6 +17,7 @@ int mmc_deselect_cards(struct mmc_host *host); >> int mmc_go_idle(struct mmc_host *host); >> int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); >> int mmc_all_send_cid(struct mmc_host *host, u32 *cid); >> +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status); >> int mmc_set_relative_addr(struct mmc_card *card); >> int mmc_send_csd(struct mmc_card *card, u32 *csd); >> int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd); >> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h >> index b460fc2..411054d 100644 >> --- a/include/linux/mmc/card.h >> +++ b/include/linux/mmc/card.h >> @@ -64,10 +64,14 @@ struct mmc_ext_csd { >> unsigned long long enhanced_area_offset; /* Units: Byte */ >> unsigned int enhanced_area_size; /* Units: KB */ >> unsigned int boot_size; /* in bytes */ >> + bool hpi_en; /* HPI enablebit */ >> + bool hpi; /* HPI support bit */ >> + unsigned int hpi_cmd; /* cmd used as HPI */ >> u8 raw_partition_support; /* 160 */ >> u8 raw_erased_mem_count; /* 181 */ >> u8 raw_ext_csd_structure; /* 194 */ >> u8 raw_card_type; /* 196 */ >> + u8 out_of_int_time; /* 198 */ >> u8 raw_s_a_timeout; /* 217 */ >> u8 raw_hc_erase_gap_size; /* 221 */ >> u8 raw_erase_timeout_mult; /* 223 */ >> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h >> index b8b1b7a..dca3c08 100644 >> --- a/include/linux/mmc/core.h >> +++ b/include/linux/mmc/core.h >> @@ -136,6 +136,7 @@ struct mmc_async_req; >> >> extern struct mmc_async_req *mmc_start_req(struct mmc_host *, >> struct mmc_async_req *, int *); >> +extern int mmc_interrupt_hpi(struct mmc_card *); >> extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *); >> extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); >> extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *); >> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h >> index 5a794cb..e16c776 100644 >> --- a/include/linux/mmc/mmc.h >> +++ b/include/linux/mmc/mmc.h >> @@ -272,6 +272,7 @@ struct _mmc_csd { >> >> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ >> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ >> +#define EXT_CSD_HPI_MGMT 161 /* R/W */ >> #define EXT_CSD_WR_REL_PARAM 166 /* RO */ >> #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ >> #define EXT_CSD_PART_CONFIG 179 /* R/W */ >> @@ -281,6 +282,7 @@ struct _mmc_csd { >> #define EXT_CSD_REV 192 /* RO */ >> #define EXT_CSD_STRUCTURE 194 /* RO */ >> #define EXT_CSD_CARD_TYPE 196 /* RO */ >> +#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ >> #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ >> #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ >> #define EXT_CSD_S_A_TIMEOUT 217 /* RO */ >> @@ -293,6 +295,7 @@ struct _mmc_csd { >> #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ >> #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ >> #define EXT_CSD_TRIM_MULT 232 /* RO */ >> +#define EXT_CSD_HPI_FEATURES 503 /* RO */ >> >> /* >> * EXT_CSD field definitions >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
