Linux LEDS Development

• Thread Index

• Re: [PATCH 1/2] ARM: davinci: dm644x: Convert LEDs to GPIO descriptor table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: davinci: dm646x: Convert LEDs to GPIO descriptor table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] ARM: davinci: dm646x: Convert LEDs to GPIO descriptor table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] ARM: davinci: dm644x: Convert LEDs to GPIO descriptor table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 2/8] gpio: regmap: Add quirk for aliased data registers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/8] regmap: Support atomic forced uncached reads
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 7/8] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 6/8] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 8/8] MAINTAINERS: Add RTL8231 MFD driver
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 4/8] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 5/8] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 3/8] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 2/8] gpio: regmap: Add quirk for aliased data registers
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 1/8] regmap: Support atomic forced uncached reads
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v5 0/8] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH] leds: flash: Remove redundant initialization of variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v8 2/2] leds: pwm: add support for default-state device property
  • From: Denis Osterland-Heim <denis.osterland.heim@xxxxxxxxx>
• [PATCH v8 1/2] leds: move default_state read from fwnode to core
  • From: Denis Osterland-Heim <denis.osterland.heim@xxxxxxxxx>
• [PATCH v8 0/2] leds: pwm: add support for default-state device
  • From: Denis Osterland-Heim <denis.osterland.heim@xxxxxxxxx>
• Re: [PATCH] leds: leds-is31fl32xx: fix an error in is31fl32xx_parse_dt()
  • From: David Rivshin <drivshin@xxxxxxxxx>
• [PATCH] leds: leds-is31fl32xx: fix an error in is31fl32xx_parse_dt()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/13] leds: rt8515: Put fwnode in any case during ->probe()
  • From: andy@surfacebook.localdomain
• Re: [PATCH -next] leds: wm831x-status: use devm_led_classdev_register()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next] leds: rb532: use devm_led_classdev_register()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next] leds: leds-asic3: use devm_led_classdev_register()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next] leds: wm831x-status: use devm_led_classdev_register()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: LEDs with hardware-accelerated patterns, suspend indication
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: stuart hayes <stuart.w.hayes@xxxxxxxxx>
• Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3] leds: pca955x: Allow platform data to set full name
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] leds: is31fl32xx: Fix missing error code in is31fl32xx_parse_dt()
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/6] gpio: regmap: Add quirk for output data register
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v4 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2] leds: pca955x: Allow platform datato set full name
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] leds: pca955x: Allow platform datato set full name
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: stuart hayes <stuart.w.hayes@xxxxxxxxx>
• Re: [PATCH leds v2 06/10] leds: core: inform trigger that it's deactivation is due to LED removal
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] HID: playstation: expose DualSense player LEDs through LED class.
  • From: Roderick Colenbrander <roderick@xxxxxxxxxx>
• [PATCH 2/3] leds: add new LED_FUNCTION_PLAYER for player LEDs for game controllers.
  • From: Roderick Colenbrander <roderick@xxxxxxxxxx>
• [PATCH 1/3] HID: playstation: expose DualSense lightbar through a multi-color LED.
  • From: Roderick Colenbrander <roderick@xxxxxxxxxx>
• [PATCH 0/3] HID: playstation: add LED support.
  • From: Roderick Colenbrander <roderick@xxxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: stuart hayes <stuart.w.hayes@xxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] Add support for PCIe SSD status LED management
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH leds v2 10/10] leds: turris-omnia: support offloading netdev trigger for WAN LED
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH leds v2 06/10] leds: core: inform trigger that it's deactivation is due to LED removal
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH] leds: is31fl32xx: Fix missing error code in is31fl32xx_parse_dt()
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2 12/13] leds: rt8515: Put fwnode in any case during ->probe()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 03/15] leds: led-class: Fix incorrectly documented param 'dev'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH leds v2 10/10] leds: turris-omnia: support offloading netdev trigger for WAN LED
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 10/10] leds: turris-omnia: support offloading netdev trigger for WAN LED
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 09/10] leds: turris-omnia: initialize each multicolor LED to white color
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 08/10] leds: turris-omnia: refactor brightness setting function
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 07/10] leds: turris-omnia: refactor sw mode setting code into separate function
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 06/10] leds: core: inform trigger that it's deactivation is due to LED removal
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 05/10] leds: trigger: netdev: change spinlock to mutex
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 04/10] leds: trigger: netdev: support HW offloading
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 03/10] leds: trigger: netdev: move trigger data structure to global include dir
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 02/10] leds: trigger: add API for HW offloading of triggers
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 01/10] leds: trigger: netdev: don't explicitly zero kzalloced data
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v2 00/10] Add support for offloading netdev trigger to HW + example implementation for Turris Omnia
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH 1/6] leds: aat1290: Move driver to flash subdirectory
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] gpio: regmap: Add quirk for output data register
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 2/6] leds: as3645a: Move driver to flash subdirectory
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v1 1/1] leds: lm36274: Add missed property.h
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v1 1/1] leds: lm36274: Add missed property.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [pavel-linux-leds:for-next 24/30] drivers/leds/leds-lm36274.c:77:6: error: implicit declaration of function 'device_get_child_node_count'
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 13/13] leds: sgm3140: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 12/13] leds: rt8515: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 11/13] leds: lt3593: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 10/13] leds: lm3697: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 09/13] leds: lm3697: Update header block to reflect reality
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 07/13] leds: lgm-sso: Convert to use list_for_each_entry*() API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 08/13] leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 04/13] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 06/13] leds: lgm-sso: Remove explicit managed GPIO resource cleanup
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 03/13] leds: el15203000: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 05/13] leds: lgm-sso: Don't spam logs when probe is deferred
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 02/13] leds: el15203000: Give better margin for usleep_range()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 01/13] leds: core: The -ENOTSUPP should never be seen by user space
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 08/28] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 28/28] leds: sgm3140: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 09/28] leds: lgm-sso: Don't spam logs when probe is deferred
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 21/28] leds: lm3697: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 11/28] leds: lgm-sso: Remove explicit managed resource cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 05/28] leds: el15203000: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 02/28] leds: core: The -ENOTSUPP should never be seen by user space
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 03/28] leds: el15203000: Give better margin for usleep_range()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 08/28] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] leds: remove unused variable
  • From: Luo Meng <luomeng12@xxxxxxxxxx>
• Re: [PATCH v1 05/28] leds: el15203000: Correct headers (of*.h -> mod_devicetable.h)
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v1 06/28] leds: el15203000: Introduce to_el15203000_led() helper
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v1 04/28] leds: el15203000: Make error handling more robust
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 6/6] leds: ktd2692: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/6] leds: lm3601x: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/6] leds: sgm3140: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/6] leds: max77693: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/6] leds: as3645a: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/6] leds: aat1290: Move driver to flash subdirectory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH leds v1 4/5] leds: trigger: netdev: support HW offloading
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH leds v1 4/5] leds: trigger: netdev: support HW offloading
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 28/28] leds: sgm3140: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 21/28] leds: lm3697: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 11/28] leds: lgm-sso: Remove explicit managed resource cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 09/28] leds: lgm-sso: Don't spam logs when probe is deferred
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 08/28] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 03/28] leds: el15203000: Give better margin for usleep_range()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 02/28] leds: core: The -ENOTSUPP should never be seen by user space
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 28/28] leds: sgm3140: Put fwnode in any case during ->probe()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 09/28] leds: lgm-sso: Don't spam logs when probe is deferred
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 21/28] leds: lm3697: Make error handling more robust
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 03/15] leds: led-class: Fix incorrectly documented param 'dev'
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v1 11/28] leds: lgm-sso: Remove explicit managed resource cleanups
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 08/28] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 03/28] leds: el15203000: Give better margin for usleep_range()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 02/28] leds: core: The -ENOTSUPP should never be seen by user space
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/15] leds: trigger: ledtrig-cpu: Fix incorrectly documented param 'ledevt'
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 14/15] leds: leds-lm3692x: Demote non-complete kernel-doc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 05/15] leds: leds-as3645a: Fix function name 'as3645a_set_current()'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 05/15] leds: leds-as3645a: Fix function name 'as3645a_set_current()'
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 14/15] leds: leds-lm3692x: Demote non-complete kernel-doc
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 05/15] leds: leds-as3645a: Fix function name 'as3645a_set_current()'
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 15/15] leds: leds-mlxcpld: Fix a bunch of kernel-doc formatting issues
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 13/15] leds: leds-lp8860: Fix kernel-doc related formatting issues
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 14/15] leds: leds-lm3692x: Demote non-complete kernel-doc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 12/15] leds: leds-mlxreg: Fix incorrect documentation of struct member 'led_cdev' and 'led_cdev_name'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 11/15] leds: leds-lm3697: Provide some missing descriptions for struct members
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 10/15] leds: leds-lm3692x: Fix some kernel-doc formatting issues
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 09/15] leds: leds-lm3530: Fix incorrect spelling of 'brightness'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 08/15] leds: leds-lp3944: Provide missing function names in documentation headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 07/15] leds: leds-is31fl32xx: Provide missing description for member 'sw_shutdown_func'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 06/15] leds: leds-blinkm: Remove unused variable 'ret'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 05/15] leds: leds-as3645a: Fix function name 'as3645a_set_current()'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/15] leds: leds-gpio-register: Supply description for param 'id'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 00/15] Rid W=1 warnings from LED
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 03/15] leds: led-class: Fix incorrectly documented param 'dev'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 01/15] leds: trigger: ledtrig-cpu: Fix incorrectly documented param 'ledevt'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 04/15] leds: leds-bcm6328: Demote kernel-doc abuse
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH leds v1 4/5] leds: trigger: netdev: support HW offloading
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] gpio: regmap: Add quirk for output data register
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH leds v1 3/5] leds: trigger: netdev: move trigger data structure to global include dir
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH leds v1 4/5] leds: trigger: netdev: support HW offloading
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH leds v1 3/5] leds: trigger: netdev: move trigger data structure to global include dir
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH leds v1 1/5] leds: trigger: netdev: don't explicitly zero kzalloced data
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2] video: backlight: qcom-wled: Add PMI8994 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] video: backlight: qcom-wled: Add PMI8994 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH leds v1 5/5] leds: trigger: netdev: change spinlock to mutex
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v1 4/5] leds: trigger: netdev: support HW offloading
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v1 3/5] leds: trigger: netdev: move trigger data structure to global include dir
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v1 2/5] leds: trigger: add API for HW offloading of triggers
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v1 1/5] leds: trigger: netdev: don't explicitly zero kzalloced data
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH leds v1 0/5] Add support for offloading netdev trigger to HW
  • From: Marek Behún <kabel@xxxxxxxxxx>
• LEDs with hardware-accelerated patterns, suspend indication
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Naming of HID LED devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/1] leds: as3645a: Fix error return code in as3645a_parse_node()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: Naming of HID LED devices
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v14 2/2] leds: mt6360: Add LED driver for MT6360
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v14 1/2] dt-bindings: leds: Add bindings for MT6360 LED
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v14 0/2] leds: mt6360: Add LED driver for MT6360
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/6] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/6] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 4/6] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 1/6] gpio: regmap: Add quirk for output data register
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 0/6] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: Naming of HID LED devices
  • From: Barnabás Pőcze <pobrn@xxxxxxxxxxxxxx>
• Re: Naming of HID LED devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Naming of HID LED devices
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH] leds: ktd2692: Fix an error handling path
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Naming of HID LED devices
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] regmap: Add MDIO bus support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] RTL8231 GPIO expander support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] mfd: Add RTL8231 core device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 1/4] mfd: rt4831: Adds support for Richtek RT4831
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 1/1] leds: blinkm: remove unused variable 'ret' in blinkm_init_hw()
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 10/17] leds: leds-nuc: Add support to blink behavior for NUC8/10
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 10/17] leds: leds-nuc: Add support to blink behavior for NUC8/10
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 10/17] leds: leds-nuc: Add support to blink behavior for NUC8/10
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 05/17] leds: leds-nuc: add all types of brightness
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 17/17] leds: leds-nuc: add support for changing the power limit scheme
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 16/17] leds: leds-nuc: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 15/17] leds: leds-nuc: fix software blink behavior logic
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 14/17] leds: leds-nuc: add support for HDD activity default
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 02/17] leds: add support for NUC WMI LEDs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 12/17] leds: leds-nuc: implement blink control for NUC6
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 06/17] leds: leds-nuc: allow changing the LED colors
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 13/17] leds: leds-nuc: better detect NUC6/NUC7 devices
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 09/17] leds: leds-nuc: add brightness and color for NUC6 API
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 07/17] leds: leds-nuc: add support for WMI API version 1.0
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 08/17] leds: leds-nuc: add basic support for NUC6 WMI
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 11/17] leds: leds-nuc: get rid of an unused variable
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 04/17] leds: leds-nuc: add support for changing S0 brightness
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 00/17] Adding support for controlling the leds found on Intel NUC
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 03/17] leds: leds-nuc: detect WMI API detection
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 5/7] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 3/7] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 1/7] regmap: Add MDIO bus support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v2 0/7] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v7 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 1/4] mfd: rt4831: Adds support for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 07/17] staging: nuc-wmi: add basic support for NUC6 WMI
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 02/17] staging: nuc-wmi: detect WMI API detection
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 00/17] Add an experimental driver for Intel NUC leds
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Add an experimental driver for Intel NUC leds
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH 01/17] staging: add support for NUC WMI LEDs
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Add an experimental driver for Intel NUC leds
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH -next] leds: class: fix W=1 warnings in led-class.c
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: leds: Add color as a required property for lp55xx controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/17] staging: add support for NUC WMI LEDs
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 17/17] staging: nuc-led: update the TODOs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 12/17] staging: nuc-wmi: better detect NUC6/NUC7 devices
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 16/17] staging: nuc-wmi: add support for changing the power limit scheme
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 15/17] staging: nuc-wmi: add support for changing the ethernet type indicator
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 01/17] staging: add support for NUC WMI LEDs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 14/17] staging: nuc-wmi: fix software blink behavior logic
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 10/17] staging: nuc-wmi: get rid of an unused variable
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 06/17] staging: nuc-wmi: add support for WMI API version 1.0
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 13/17] staging: nuc-led: add support for HDD activity default
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 04/17] staging: nuc-wmi: add all types of brightness
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 11/17] staging: nuc-wmi: implement blink control for NUC6
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 09/17] staging: nuc-wmi: Add support to blink behavior for NUC8/10
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 05/17] staging: nuc-wmi: allow changing the LED colors
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 08/17] staging: muc-wmi: add brightness and color for NUC6 API
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 07/17] staging: nuc-wmi: add basic support for NUC6 WMI
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 00/17] Add an experimental driver for Intel NUC leds
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 03/17] staging: nuc-wmi: add support for changing S0 brightness
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 02/17] staging: nuc-wmi: detect WMI API detection
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 1/1] leds: as3645a: Fix error return code in as3645a_parse_node()
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• [RFC 1/2] dt-bindings: leds: Add color as a required property for lp55xx controller
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• [RFC 2/2] ARM: dts: imx6dl-yapp4: Fix lp5562 driver probe
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• [RFC 0/2] Regression in lp55xx driver since multicolor framework was added?
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 09/69] leds: lp5523: check return value of lp5xx_read and jump to cleanup code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] leds: leds-core: Implement the retain-state-shutdown property
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: Fix reference file name of documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: common: add disk write/read and usb-host
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 1/4] mfd: rt4831: Adds support for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH 3/5] mfd: Add RTL8231 core device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/5] mfd: Add RTL8231 core device
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH -next] leds: turris-omnia: add missing MODULE_DEVICE_TABLE
  • From: Zou Wei <zou_wei@xxxxxxxxxx>
• [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• [PATCH 1/2] leds: lp55xx: support predefined pattern in Device Tree
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• [PATCH 0/2] Device Tree support for LP5562 predefined patterns
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• Re: [PATCH v3 1/1] kernel.h: Split out panic and oops helpers
  • From: Alex Elder <elder@xxxxxxxx>
• Re: Linux kernel: updating acer-wmi
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH 5/5] leds: Add support for RTL8231 LED scan matrix
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH 4/5] pinctrl: Add RTL8231 pin control and GPIO support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH 3/5] mfd: Add RTL8231 core device
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH 0/5] RTL8231 GPIO expander support
  • From: Sander Vanheule <sander@xxxxxxxxxxxxx>
• [PATCH v3 1/1] kernel.h: Split out panic and oops helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] leds: lp55xx: Initialize enable GPIO direction to output
  • From: Doug Zobel <dougdev334@xxxxxxxxx>
• Re: [PATCH -next] leds: tlc591xx: fix return value check in tlc591xx_probe()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: Fix reference file name of documentation
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v1 26/28] leds: pwm: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 28/28] leds: sgm3140: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 27/28] leds: rt8515: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 17/28] leds: lm36274: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 25/28] leds: lt3593: Make use of device properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 18/28] leds: lm3692x: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 23/28] leds: lp50xx: Put fwnode in error case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 24/28] leds: lt3593: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 22/28] leds: lm3697: Don't spam logs when probe is deferred
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 21/28] leds: lm3697: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 19/28] leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 20/28] leds: lm3697: Update header block to reflect reality
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 16/28] leds: lm36274: Put fwnode in error case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 15/28] leds: lm3532: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 13/28] leds: lgm-sso: Convert to use list_for_each_entry*() API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 14/28] leds: lm3532: select regmap I2C API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 12/28] leds: lgm-sso: Drop duplicate NULL check for GPIO operations
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 11/28] leds: lgm-sso: Remove explicit managed resource cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 09/28] leds: lgm-sso: Don't spam logs when probe is deferred
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 10/28] leds: lgm-sso: Remove unneeded of_match_ptr()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 06/28] leds: el15203000: Introduce to_el15203000_led() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 05/28] leds: el15203000: Correct headers (of*.h -> mod_devicetable.h)
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 07/28] leds: lgm-sso: Fix clock handling
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 08/28] leds: lgm-sso: Put fwnode in any case during ->probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 04/28] leds: el15203000: Make error handling more robust
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 03/28] leds: el15203000: Give better margin for usleep_range()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 01/28] leds: class: The -ENOTSUPP should never be seen by user space
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 00/28] leds: cleanups and fwnode refcounting bug fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 02/28] leds: core: The -ENOTSUPP should never be seen by user space
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: common: add disk write/read and usb-host
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: common: add disk write/read and usb-host
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• [PATCH led-next 1/1] leds: mlxreg: Provide conversion for hardware LED color code
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [BUG] leds-pca963x : scheduling while atomic
  • From: pgeiem <pgeiem@xxxxxxxxxxxxxx>
• [BUG] leds-pca963x : scheduling while atomic
  • From: pgeiem <pgeiem@xxxxxxxxxxxxxx>
• [PATCH] leds: Fix reference file name of documentation
  • From: Wan Jiabing <wanjiabing@xxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: leds: Add retain-state-shutdown boolean
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [GIT PULL] LEDs changes for v5.13-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [GIT PULL] LEDs changes for v5.13-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v6 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [RESEND PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
• Re: [PATCH 09/69] leds: lp5523: check return value of lp5xx_read and jump to cleanup code
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [GIT PULL] LEDs changes for v5.13-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] LEDs changes for v5.13-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• Re: [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• Re: [PATCH] leds: trigger/tty: Use led_set_brightness() to support all use cases
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] leds: trigger/tty: Use led_set_brightness() to support all use cases
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• Re: [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• [GIT PULL] LEDs changes for v5.13-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [RESEND PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND PATCH v6 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [RFC PATCH 2/2] leds: trigger: implement block trigger
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• [RFC PATCH 1/2] block: export block_class and disk_type symbols
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• [RFC PATCH 0/2] leds: trigger: introduce block trigger
  • From: Enzo Matsumiya <ematsumiya@xxxxxxx>
• Broken LP5562 LEDs since multicolor framework was added
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• Re: [PATCH] leds: ledtrig-pattern: Use last_repeat when applying hw pattern
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: leds: Add retain-state-shutdown boolean
  • From: vishwanatha subbanna <vishwa@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 6/6] arm64: dts: qcom: db820c: Add user LEDs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 5/6] arm64: dts: qcom: pmi8994: Define MPP block
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 4/6] arm64: dts: qcom: sdm845: Enable user LEDs on DB845c
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 2/6] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 3/6] arm64: dts: qcom: Add LPG to pm8916, pm8994, pmi8994 and pmi8998
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 0/6] Qualcomm Light Pulse Generator
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v7 1/6] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/5] dt-bindings: leds: Add retain-state-shutdown boolean
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 5/5] leds: pca955x: Implement the default-state property
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 4/5] leds: pca955x: Add brightness_get function
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 3/5] leds: pca955x: Clean up code formatting
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 2/5] leds: leds-core: Implement the retain-state-shutdown property
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: leds: Add retain-state-shutdown boolean
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 0/5] leds: Support retaining state for the PCA955x
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] leds: led-core: The value of delay_on and delay_off remains when led off
  • From: lqhua06@xxxxxxx
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH linux dev-5.10 06/35] ARM: dts: aspeed: rainier: Add leds that are off PCA9552
  • From: vishwanatha subbanna <vishwa@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH linux dev-5.10 06/35] ARM: dts: aspeed: rainier: Add leds that are off PCA9552
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: LEDS_BLINK_LGM should depend on X86
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH v6 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [RESEND PATCH v6 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [RESEND PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• [RESEND PATCH v6 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
  • From: cy_huang <u0084500@xxxxxxxxx>
• [RESEND PATCH v6 1/4] mfd: rt4831: Adds support for Richtek RT4831
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH] leds: LEDS_BLINK_LGM should depend on X86
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH linux dev-5.10 06/35] ARM: dts: aspeed: rainier: Add leds that are off PCA9552
  • From: vishwanatha subbanna <vishwa@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: feature data direction
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: pca9532: Assign gpio base dynamically
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: pca955x: Allow full control over led name
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: trigger: pattern: Switch to using the new API kobj_to_dev()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: LEDS_BLINK_LGM should depend on X86
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH][next] leds: lgm: Fix spelling mistake "prepate" -> "prepare"
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 -next] leds: convert comma to semicolon
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: trigger: timer: Optionally stop timer trigger on reboot
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/4] leds: Add driver for QCOM SPMI Flash LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: lp5523/lp5xx-common : Keyboard and RGB LEDs Not Working on Nokia N900
  • From: Sicelo <absicsz@xxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: feature data direction
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: feature data direction
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: feature data direction
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] leds: trigger/tty: feature data direction
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] leds: ledtrig-pattern: Use last_repeat when applying hw pattern
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
  • From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
• [PATCH] leds: pca9532: Assign gpio base dynamically
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] leds: pca955x: Allow full control over led name
  • From: vishwanatha subbanna <vishwa@xxxxxxxxxxxxxxxxxx>
• [PATCH] leds: blinkm: remove unused variable
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• leds: netdev trigger - misleading link state indication at boot
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• lp5523/lp5xx-common : Keyboard and RGB LEDs Not Working on Nokia N900
  • From: Sicelo <absicsz@xxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] add device drivers for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] leds: as3645a: Keep fwnode reference count balanced
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] leds: as3645a: Keep fwnode reference count balanced
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] leds: lgm: Fix an error handling path in '__sso_led_dt_parse()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/2] leds: lgm: Propagate error codes to the caller
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/1] kernel.h: Split out panic and oops helpers
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] kernel.h: Split out panic and oops helpers
  • From: Helge Deller <deller@xxxxxx>
• Re: [PATCH v2 1/1] kernel.h: Split out panic and oops helpers
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v2 1/1] kernel.h: Split out panic and oops helpers
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2 1/1] kernel.h: Split out panic and oops helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 resend 0/9] HID: lenovo: LED fixes and Thinkpad X1 Tablet kbd support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 resend 0/9] HID: lenovo: LED fixes and Thinkpad X1 Tablet kbd support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] add device drivers for Siemens Industrial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH resend 0/3] HID: elan: Mute LED support fixes
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH -next] leds: tlc591xx: fix return value check in tlc591xx_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH resend] leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 9/9] HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 8/9] HID: lenovo: Rework how the tp10ubkbd code decides which USB interface to use
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 7/9] HID: lenovo: Set default_triggers for the mute and micmute LEDs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 6/9] HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 5/9] HID: lenovo: Set LEDs max_brightness value
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 4/9] HID: lenovo: Remove lenovo_led_brightness_get()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 3/9] HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 2/9] HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 1/9] HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 0/9] HID: lenovo: LED fixes and Thinkpad X1 Tablet kbd support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 2/3] HID: elan: Set default_trigger for the mute LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 3/3] HID: elan: Remove elan_mute_led_get_brigtness()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 1/3] HID: elan: Silence mute LED errors being logged when the device is unplugged
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 0/3] HID: elan: Mute LED support fixes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/4] add device drivers for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 0/4] add device drivers for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• Re: [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• [PATCH v3] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• Re: [PATCH 2/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Vesa Jääskeläinen <dachaac@xxxxxxxxx>
• Re: [PATCH 17/17] auxdisplay: ht16k33: Add segment display LED support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: leds: pca955x: Allow full control over led name
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] dt-bindings: Clean-up undocumented compatible strings
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3 2/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v3 1/2] leds: rt4505: Add DT binding document for Richtek RT4505
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• Re: [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Alexander Dahl <post@xxxxxxxxxxx>
• [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• [PATCH v2 1/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• [PATCH v2 0/2] New multiple GPIOs LED driver
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• Re: [PATCH 2/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH v2 1/1] leds: lgm: Improve Kconfig help
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 1/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/2] leds: rt4505: Add support for Richtek RT4505 flash LED controller
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• [PATCH v2 1/1] leds: lgm: Improve Kconfig help
  • From: Rahul Tanwar <rtanwar@xxxxxxxxxxxxx>
• [PATCH v2 0/1] leds: lgm: Address review concerns
  • From: Rahul Tanwar <rtanwar@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• Re: [PATCH 2/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Vesa Jääskeläinen <dachaac@xxxxxxxxx>
• [PATCH] leds: pca955x: Allow full control over led name
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/2] New multiple GPIOs LED driver
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 2/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 2/2] video: backlight: qcom-wled: Add PMI8994 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] video: backlight: qcom-wled: Add PMI8994 compatible
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] auxdisplay: ht16k33: Add segment display LED support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 2/2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• [PATCH 1/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• [PATCH 0/2] New multiple GPIOs LED driver
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• RE: [PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• RE: [PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• Re: [PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• RE: [PATCH v2] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <Hermes.Zhang@xxxxxxxx>
• [PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
  • From: Hermes Zhang <chenhui.zhang@xxxxxxxx>
• Re: [PATCH] dt-bindings: leds: leds-gpio: fix & extend node regex
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: leds-gpio: fix & extend node regex
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 17/17] auxdisplay: ht16k33: Add segment display LED support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>