Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, 21 Oct 2020 13:12:22 -0700 Bjorn Andersson wrote:
> The Light Pulse Generator (LPG) is a PWM-block found in a wide range of
> PMICs from Qualcomm. It can operate on fixed parameters or based on a
> lookup-table, altering the duty cycle over time - which provides the
> means for e.g. hardware assisted transitions of LED brightness.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> Changes since v5:
> - Make sure to not used the state of the last channel in a group to
> determine if the current sink should be active for all channels in the
> group. - Replacement of unsigned -1 with UINT_MAX
> - Work around potential overflow by using larger data types, instead of
> separate code paths - Use cpu_to_l16() rather than hand rolling them
> - Minor style cleanups
> 
>  drivers/leds/Kconfig         |    9 +
>  drivers/leds/Makefile        |    1 +
>  drivers/leds/leds-qcom-lpg.c | 1190 ++++++++++++++++++++++++++++++++++
>  3 files changed, 1200 insertions(+)
>  create mode 100644 drivers/leds/leds-qcom-lpg.c

Works well on the Xiaomi Mi Note 2 (msm8996pro/pmi8996).

Tested-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>

Regards,
Yassine





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux