Hi Andy,
Also here I've tried to address your remarks for v3, some extra details below.
On Tue, 2021-05-18 at 01:00 +0300, Andy Shevchenko wrote:
> On Mon, May 17, 2021 at 10:28 PM Sander Vanheule <sander@xxxxxxxxxxxxx> wrote:
> > +static unsigned int rtl8231_led_current_interval(struct rtl8231_led *pled)
> > +{
> > + unsigned int mode;
>
> > + unsigned int i = 0;
>
> This...
>
> > + if (regmap_field_read(pled->reg_field, &mode))
> > + return 0;
> > +
> > + while (i < pled->modes->num_toggle_rates && mode != pled->modes-
> > >toggle_rates[i].mode)
> > + i++;
>
> ...and this will be better as a for-loop.
>
> > + if (i < pled->modes->num_toggle_rates)
> > + return pled->modes->toggle_rates[i].interval;
>
> > + else
>
> Redundant.
>
> > + return 0;
> > +}
Shrunk down to "for (...) if (...) return ...;" in v3.
>
> > + interval = 500;
>
> interval_ms
Good suggestion, thanks. Don't need those comments in the code then.
>
> > + u32 addr[2];
> > + int err;
> > +
>
> > + if (!fwnode_property_count_u32(fwnode, "reg"))
>
> err = fwnode_property_count_u32(...);
> if (err < 0)
> return err;
> if (err == 0)
> return -ENODEV;
>
> > + return -ENODEV;
> > +
> > + err = fwnode_property_read_u32_array(fwnode, "reg", addr,
> > ARRAY_SIZE(addr));
>
> If count returns 1? What's the point of counting if you always want two?
If count returns 1, or more than 2, that's an error. But this check was missing
in v2, so I added it in v3.
>
> > + if (!device_property_match_string(dev, "realtek,led-scan-mode",
> > "single-color")) {
>
> It seems that device_property_match_string() and accompanying
> functions have wrong description of returned codes, i.e. it returns
> the index of the matched string. It's possible that some APIs are
> broken (but I believe that the former is the case).
>
> That said, I think the proper comparison should be >= 0.
Thanks, fixed.
Best,
Sander
