1 microsecond with 20 millisecond parameter is too low margin for
usleep_range(). Give 100 to make scheduler happier.
While at it, fix indentation in cases where EL_FW_DELAY_USEC is in use.
In the loop, move it to the end to avoid a conditional.
Signed-off-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
drivers/leds/leds-el15203000.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/leds/leds-el15203000.c b/drivers/leds/leds-el15203000.c
index 6ca47f2a2004..912451db05e6 100644
--- a/drivers/leds/leds-el15203000.c
+++ b/drivers/leds/leds-el15203000.c
@@ -95,27 +95,22 @@ static int el15203000_cmd(struct el15203000_led *led, u8 brightness)
/* to avoid SPI mistiming with firmware we should wait some time */
if (time_after(led->priv->delay, jiffies)) {
- dev_dbg(led->priv->dev, "Wait %luus to sync",
- EL_FW_DELAY_USEC);
+ dev_dbg(led->priv->dev, "Wait %luus to sync", EL_FW_DELAY_USEC);
- usleep_range(EL_FW_DELAY_USEC,
- EL_FW_DELAY_USEC + 1);
+ usleep_range(EL_FW_DELAY_USEC, EL_FW_DELAY_USEC + 100);
}
cmd[0] = led->reg;
cmd[1] = brightness;
for (i = 0; i < ARRAY_SIZE(cmd); i++) {
- if (i)
- usleep_range(EL_FW_DELAY_USEC,
- EL_FW_DELAY_USEC + 1);
-
ret = spi_write(led->priv->spi, &cmd[i], sizeof(cmd[i]));
if (ret) {
dev_err(led->priv->dev,
"spi_write() error %d", ret);
break;
}
+ usleep_range(EL_FW_DELAY_USEC, EL_FW_DELAY_USEC + 100);
}
led->priv->delay = jiffies + usecs_to_jiffies(EL_FW_DELAY_USEC);
@@ -313,8 +308,7 @@ static int el15203000_probe(struct spi_device *spi)
priv->count = count;
priv->dev = &spi->dev;
priv->spi = spi;
- priv->delay = jiffies -
- usecs_to_jiffies(EL_FW_DELAY_USEC);
+ priv->delay = jiffies - usecs_to_jiffies(EL_FW_DELAY_USEC);
spi_set_drvdata(spi, priv);
--
2.31.1
