Hi! > > > - Need to validate the uAPI and document it before moving > > > this driver out of staging. > > > > > - Stabilize and document its sysfs interface. > > > > Would you mind starting with this one? > > Do you mean writing the ABI document for it? Surely I can do that, > but I'm not sure where to put such document while it is on staging. No need for formal ABI just yet, but it needs to be clear what the interface is. > > We should have existing APIs > > for most of functionality described... > > I tried to stay as close as possible to the existing API, but > there are some things that required a different one. I believe it should be possible to move _way_ closer to existing APIs. > For instance, with WMI rev 0.64 and 1.0, any LED of the device > can be programmed to be a power indicator. > > When a LED is programmed this way, there are up to 3 (on rev 1.0) or up > to 4 (on rev 0.64) different brightness level of the LED, and those > are associated with a power status (like S0, S3, S5, "ready mode"). I'll need a description how this works. > /sys/class/leds/nuc::front1/ > ├── blink_behavior > ├── blink_frequency We have timer trigger for these. > ├── ethernet_type > ├── hdd_default > ├── indicator > ├── ready_mode_blink_behavior > ├── ready_mode_blink_frequency > ├── ready_mode_brightness > ├── s0_blink_behavior > ├── s0_blink_frequency > ├── s0_brightness > ├── s3_blink_behavior > ├── s3_blink_frequency > ├── s3_brightness > ├── s5_blink_behavior > ├── s5_blink_frequency > ├── s5_brightness No. Take a look at triggers; for example hdd monitor should look very much like existing disk trigger. > On other words, the "indicator" tells what type of hardware event > the LED is currently measuring: > > $ cat /sys/class/leds/nuc\:\:front1/indicator > Power State [HDD Activity] Ethernet WiFi Software Power Limit Disable So this will use existing "trigger" infrastructure. > That should likely be easier to discuss if any changes at the > ABI would be needed. Before moving it out of staging, I would > add another one under Documentation/ABI describing the meaning > of each sysfs node. Lets get reasonable ABI before moving it _into_ tree, staging or otherwise. Best regards, Pavel -- http://www.livejournal.com/~pavelmachek
Attachment:
signature.asc
Description: Digital signature
