In 'ktd2692_parse_dt()', if an error occurs after a successful
'regulator_enable()' call, we should call 'regulator_enable()'.
This is the same in 'ktd2692_probe()', if an error occurs after a
successful 'ktd2692_parse_dt()' call.
Instead of adding 'regulator_enable()' in several places, implement a
resource managed solution and simplify the remove function accordingly.
Fixes: b7da8c5c725c ("leds: Add ktd2692 flash LED driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested only.
The regulator looks optional, so maybe 'devm_add_action()' without a
'return ret;' would be more logical that 'devm_add_action_or_reset()'.
The code could be simpler if we don't car about the message if
'regulator_disable()' fails.
---
drivers/leds/leds-ktd2692.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
index 632f10db4b3f..f341da1503a4 100644
--- a/drivers/leds/leds-ktd2692.c
+++ b/drivers/leds/leds-ktd2692.c
@@ -256,6 +256,17 @@ static void ktd2692_setup(struct ktd2692_context *led)
| KTD2692_REG_FLASH_CURRENT_BASE);
}
+static void regulator_disable_action(void *_data)
+{
+ struct device *dev = _data;
+ struct ktd2692_context *led = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(dev, "Failed to disable supply: %d\n", ret);
+}
+
static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
struct ktd2692_led_config_data *cfg)
{
@@ -286,8 +297,14 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
if (led->regulator) {
ret = regulator_enable(led->regulator);
- if (ret)
+ if (ret) {
dev_err(dev, "Failed to enable supply: %d\n", ret);
+ } else {
+ ret = devm_add_action_or_reset(dev,
+ regulator_disable_action, dev);
+ if (ret)
+ return ret;
+ }
}
child_node = of_get_next_available_child(np, NULL);
@@ -377,17 +394,9 @@ static int ktd2692_probe(struct platform_device *pdev)
static int ktd2692_remove(struct platform_device *pdev)
{
struct ktd2692_context *led = platform_get_drvdata(pdev);
- int ret;
led_classdev_flash_unregister(&led->fled_cdev);
- if (led->regulator) {
- ret = regulator_disable(led->regulator);
- if (ret)
- dev_err(&pdev->dev,
- "Failed to disable supply: %d\n", ret);
- }
-
mutex_destroy(&led->lock);
return 0;
--
2.30.2
