On Mon, 17 May 2021, cy_huang wrote: > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> > > This adds support Richtek RT4831 core. It includes four channel WLED driver > and Display Bias Voltage outputs. > > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> > --- > - Send the patch series for the wrong mail subject. > > The RT4831 regulator patches are already on main stream, and can be referred to > 9351ab8b0cb6 regulator: rt4831: Adds support for Richtek RT4831 DSV regulator > 934b05e81862 regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator > > since v6 > - Respin the date from 2020 to 2021. > - Rmove the shutdown routine. > - Change the macro OF_MFD_CELL to MFD_CELL_OF. > > since v5 > - Rename file name from rt4831-core.c to rt4831.c > - Change RICHTEK_VID to RICHTEK_VENDOR_ID. > - Change gpio_desc nameing from 'enable' to 'enable_gpio' in probe. > - Change variable 'val' to the meaningful name 'chip_id'. > - Refine the error log when vendor id is not matched. > - Remove of_match_ptr. > > since v2 > - Refine Kconfig descriptions. > - Add copyright. > - Refine error logs in probe. > - Refine comment lines in remove and shutdown. > --- > drivers/mfd/Kconfig | 10 +++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/rt4831.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 126 insertions(+) > create mode 100644 drivers/mfd/rt4831.c Applied, thanks. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog
