Linux IIO (Industrial I/O) Development

• Date Index

• [PATCH v2 3/5] iio: mlx90614: Drop unused register macros, (continued)
  • [PATCH v2 3/5] iio: mlx90614: Drop unused register macros, Marek Vasut
    • Re: [PATCH v2 3/5] iio: mlx90614: Drop unused register macros, Crt Mori
  • [PATCH v2 4/5] iio: mlx90614: Factor our register IO and constants into model specific descriptor, Marek Vasut
    • Re: [PATCH v2 4/5] iio: mlx90614: Factor our register IO and constants into model specific descriptor, Crt Mori
  • Re: [PATCH v2 1/5] dt-bindings: iio: temperature: melexis,mlx90614: Document MLX90615 support, Crt Mori
• [PATCH 1/3] dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrix, Krzysztof Kozlowski
  • [PATCH 2/3] dt-bindings: iio: semtech,sx9310: reference common schema for label, Krzysztof Kozlowski
    • Re: [PATCH 2/3] dt-bindings: iio: semtech,sx9310: reference common schema for label, Rob Herring
  • [PATCH 3/3] dt-bindings: iio: semtech,sx9324: reference common schema for label, Krzysztof Kozlowski
    • Re: [PATCH 3/3] dt-bindings: iio: semtech,sx9324: reference common schema for label, Rob Herring
  • Re: [PATCH 1/3] dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrix, Conor Dooley
    • Re: [PATCH 1/3] dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrix, Jonathan Cameron
      • Re: [PATCH 1/3] dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrix, Krzysztof Kozlowski
        • Re: [PATCH 1/3] dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrix, Jonathan Cameron
• [dt-schema PATCH] schemas: iio: add label, Krzysztof Kozlowski
  • Re: [dt-schema PATCH] schemas: iio: add label, Jonathan Cameron
  • Re: [dt-schema PATCH] schemas: iio: add label, Rob Herring
    • Re: [dt-schema PATCH] schemas: iio: add label, Jonathan Cameron
• [PATCH] iio: dac: ad5446: Add ID of compatible Texas Instruments i2c dac121c*, Philippe De Muyter
  • Re: [PATCH] iio: dac: ad5446: Add ID of compatible Texas Instruments i2c dac121c*, Jonathan Cameron
    • Re: [PATCH] iio: dac: ad5446: Add ID of compatible Texas Instruments i2c dac121c*, Philippe De Muyter
      • Re: [PATCH] iio: dac: ad5446: Add ID of compatible Texas Instruments i2c dac121c*, Philippe De Muyter
        • Re: [PATCH] iio: dac: ad5446: Add ID of compatible Texas Instruments i2c dac121c*, Jonathan Cameron
• [PATCH AUTOSEL 6.2 04/20] iio: imu: st_lsm6dsx: discard samples during filters settling time, Sasha Levin
• [PATCH AUTOSEL 6.3 04/24] iio: imu: st_lsm6dsx: discard samples during filters settling time, Sasha Levin
• [PATCH v4 0/3] Support Honeywell mprls0025pa pressure sensor, Andreas Klinger
  • [PATCH v4 3/3] MAINTAINERS: Add Honeywell mprls0025pa sensor, Andreas Klinger
  • [PATCH v4 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Andreas Klinger
    • Re: [PATCH v4 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, kernel test robot
    • Re: [PATCH v4 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Jonathan Cameron
      • Re: [PATCH v4 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Andreas Klinger
        • Re: [PATCH v4 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Jonathan Cameron
  • [PATCH v4 1/3] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Andreas Klinger
    • Re: [PATCH v4 1/3] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Krzysztof Kozlowski
• [PATCH v3 0/2] Add support for the ICM 20600 IMU, Hermes Zhang
  • [PATCH v3 1/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Hermes Zhang
    • Re: [PATCH v3 1/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Jean-Baptiste Maneyrol
  • [PATCH v3 2/2] iio: imu: mpu6050: Add support for the ICM 20600 IMU, Hermes Zhang
    • Re: [PATCH v3 2/2] iio: imu: mpu6050: Add support for the ICM 20600 IMU, Jean-Baptiste Maneyrol
  • Re: [PATCH v3 0/2] Add support for the ICM 20600 IMU, Jonathan Cameron
    • Re: [PATCH v3 0/2] Add support for the ICM 20600 IMU, Jonathan Cameron
• [PATCH 1/2] dt-bindings:iio:temperature:melexis,mlx90614: Document MLX90615 support, Marek Vasut
  • [PATCH 2/2] iio: mlx90614: Add MLX90615 support, Marek Vasut
    • Re: [PATCH 2/2] iio: mlx90614: Add MLX90615 support, Jonathan Cameron
  • Re: [PATCH 1/2] dt-bindings:iio:temperature:melexis,mlx90614: Document MLX90615 support, Krzysztof Kozlowski
    • Re: [PATCH 1/2] dt-bindings:iio:temperature:melexis,mlx90614: Document MLX90615 support, Marek Vasut
• [PATCH] iio: imu: inv_icm42600: fix too big timestamp jitter, inv . git-commit
  • Re: [PATCH] iio: imu: inv_icm42600: fix too big timestamp jitter, Jonathan Cameron
    • Re: [PATCH] iio: imu: inv_icm42600: fix too big timestamp jitter, Jean-Baptiste Maneyrol
      • Re: [PATCH] iio: imu: inv_icm42600: fix too big timestamp jitter, Jonathan Cameron
• [PATCH v2 0/2] Add support for the ICM 20600 IMU, Hermes Zhang
  • [PATCH v2 1/2] iio: imu: mpu6050: Add support for the ICM 20600 IMU, Hermes Zhang
  • [PATCH v2 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Hermes Zhang
    • Re: [PATCH v2 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Krzysztof Kozlowski
• [RFC PATCH 0/3] ROHM Sensor async probing, Matti Vaittinen
  • [RFC PATCH 1/3] iio: bu27034: Probe asynchronously, Matti Vaittinen
  • [RFC PATCH 3/3] iio: kx022a: Probe asynchronously, Matti Vaittinen
  • [RFC PATCH 2/3] iio: bu27008: Probe asynchronously, Matti Vaittinen
  • Re: [RFC PATCH 0/3] ROHM Sensor async probing, Jonathan Cameron
• [PATCH] iio: bu27034: Reinit regmap cache after reset, Matti Vaittinen
  • Re: [PATCH] iio: bu27034: Reinit regmap cache after reset, Jonathan Cameron
    • Re: [PATCH] iio: bu27034: Reinit regmap cache after reset, Matti Vaittinen
      • Re: [PATCH] iio: bu27034: Reinit regmap cache after reset, Jonathan Cameron
        • Re: [PATCH] iio: bu27034: Reinit regmap cache after reset, Matti Vaittinen
• [PATCH] iio: imu: inv_icm42600: fix timestamp reset, inv . git-commit
  • Re: [PATCH] iio: imu: inv_icm42600: fix timestamp reset, Jonathan Cameron
    • Re: [PATCH] iio: imu: inv_icm42600: fix timestamp reset, Jean-Baptiste Maneyrol
      • Re: [PATCH] iio: imu: inv_icm42600: fix timestamp reset, Greg KH
• [PATCH v3 1/2] iio: adc: stm32-adc: skip adc-diff-channels setup if none is present, Sean Nyekjaer
  • [PATCH v3 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Sean Nyekjaer
    • Re: [PATCH v3 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Olivier MOYSAN
      • Re: [PATCH v3 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Jonathan Cameron
• [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Rasmus Villemoes
  • Re: [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Nuno Sá
    • Re: [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Rasmus Villemoes
      • Re: [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Jonathan Cameron
        • Re: [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Rasmus Villemoes
          • Re: [PATCH] iio: addac: ad74413: don't set DIN_SINK for functions other than digital input, Jonathan Cameron
• [PATCH v2] iio: bu27034: Ensure reset is written, Matti Vaittinen
  • Re: [PATCH v2] iio: bu27034: Ensure reset is written, Jonathan Cameron
    • Re: [PATCH v2] iio: bu27034: Ensure reset is written, Matti Vaittinen
      • Re: [PATCH v2] iio: bu27034: Ensure reset is written, Jonathan Cameron
• [PATCH] iio: addac: ad74413: fix resistance input processing, Rasmus Villemoes
  • Re: [PATCH] iio: addac: ad74413: fix resistance input processing, Nuno Sá
• [PATCH v4 0/5] Support ROHM BU27008 RGB sensor, Matti Vaittinen
  • [PATCH v4 1/5] dt-bindings: iio: light: ROHM BU27008, Matti Vaittinen
  • [PATCH v4 2/5] iio: trigger: Add simple trigger_validation helper, Matti Vaittinen
    • Re: [PATCH v4 2/5] iio: trigger: Add simple trigger_validation helper, Jonathan Cameron
  • [PATCH v4 3/5] iio: kx022a: Use new iio_validate_own_trigger(), Matti Vaittinen
  • [PATCH v4 5/5] MAINTAINERS: Add ROHM BU27008, Matti Vaittinen
  • [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
    • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
      • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Vaittinen, Matti
        • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
          • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
    • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
      • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
        • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
          • Re: [PATCH v4 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
• [PATCH] iio: bu27034: Ensure reset is written, Matti Vaittinen
  • Re: [PATCH] iio: bu27034: Ensure reset is written, Vaittinen, Matti
• [PATCH v4] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
  • Re: [PATCH v4] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Nuno Sá
    • Re: [PATCH v4] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Jonathan Cameron
      • Re: [PATCH v4] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
• [PATCH RESEND v3 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace, Marijn Suijten
  • [PATCH RESEND v3 1/5] iio: core: Point users of extend_name field to read_label callback, Marijn Suijten
  • [PATCH RESEND v3 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT label, Marijn Suijten
    • Re: [PATCH RESEND v3 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT label, Dmitry Baryshkov
  • [PATCH RESEND v3 3/5] iio: adc: qcom-spmi-adc5: Fall back to datasheet_name instead of fwnode name, Marijn Suijten
    • Re: [PATCH RESEND v3 3/5] iio: adc: qcom-spmi-adc5: Fall back to datasheet_name instead of fwnode name, Dmitry Baryshkov
  • [PATCH RESEND v3 4/5] iio: adc: qcom-spmi-adc5: Remove unnecessary datasheet_name NULL check, Marijn Suijten
    • Re: [PATCH RESEND v3 4/5] iio: adc: qcom-spmi-adc5: Remove unnecessary datasheet_name NULL check, Dmitry Baryshkov
  • [PATCH RESEND v3 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace, Marijn Suijten
    • Re: [PATCH RESEND v3 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace, Dmitry Baryshkov
      • Re: [PATCH RESEND v3 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace, Jonathan Cameron
  • Re: [PATCH RESEND v3 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace, Jonathan Cameron
• [PATCH v2 1/1] iio: light: vcnl4035: fixed chip ID check, Frank Li
  • Re: [PATCH v2 1/1] iio: light: vcnl4035: fixed chip ID check, Jonathan Cameron
• [PATCH 1/1] iio: light: vcnl4035: fixed chip ID check, Frank Li
  • Re: [PATCH 1/1] iio: light: vcnl4035: fixed chip ID check, Jonathan Cameron
    • RE: [EXT] Re: [PATCH 1/1] iio: light: vcnl4035: fixed chip ID check, Frank Li
  • Re: [PATCH 1/1] iio: light: vcnl4035: fixed chip ID check, Christophe JAILLET
• [PATCH v3 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor, Stefan Windfeldt-Prytz
  • [PATCH v3 1/2] dt-bindings: iio: light: Document TI OPT4001 light sensor, Stefan Windfeldt-Prytz
    • Re: [PATCH v3 1/2] dt-bindings: iio: light: Document TI OPT4001 light sensor, Rob Herring
  • [PATCH v3 2/2] iio: light: Add support for TI OPT4001 light sensor, Stefan Windfeldt-Prytz
  • Re: [PATCH v3 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor, Jonathan Cameron
• [PATCH v3 0/5] Support ROHM BU27008 RGB sensor, Matti Vaittinen
  • [PATCH v3 1/5] dt-bindings: iio: light: ROHM BU27008, Matti Vaittinen
  • [PATCH v3 2/5] iio: trigger: Add simple trigger_validation helper, Matti Vaittinen
  • [PATCH v3 5/5] MAINTAINERS: Add ROHM BU27008, Matti Vaittinen
  • [PATCH v3 3/5] iio: kx022a: Use new iio_validate_own_trigger(), Matti Vaittinen
  • [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
    • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
      • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Vaittinen, Matti
        • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
          • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
            • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
    • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
      • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Vaittinen, Matti
        • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
          • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
          • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
            • Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
• [PATCH v3 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
  • [PATCH v3 2/7] iio: accel: kionix-kx022a: Remove blank lines, Mehdi Djait
    • Re: [PATCH v3 2/7] iio: accel: kionix-kx022a: Remove blank lines, Matti Vaittinen
  • [PATCH v3 3/7] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Mehdi Djait
  • [PATCH v3 1/7] dt-bindings: iio: Add KX132-1211 accelerometer, Mehdi Djait
  • [PATCH v3 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table, Mehdi Djait
    • Re: [PATCH v3 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table, Matti Vaittinen
      • Re: [PATCH v3 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table, Jonathan Cameron
    • Re: [PATCH v3 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table, Andy Shevchenko
      • Re: [PATCH v3 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table, Mehdi Djait
  • [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
    • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Matti Vaittinen
      • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
        • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Matti Vaittinen
          • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
            • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Matti Vaittinen
              • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Jonathan Cameron
          • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
            • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Matti Vaittinen
    • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Andi Shyti
      • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
        • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Jonathan Cameron
          • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Andy Shevchenko
            • Re: [PATCH v3 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
  • [PATCH v3 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Mehdi Djait
    • Re: [PATCH v3 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Matti Vaittinen
      • Re: [PATCH v3 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Mehdi Djait
  • [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
    • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Matti Vaittinen
      • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Jonathan Cameron
    • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Jonathan Cameron
      • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
        • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Jonathan Cameron
          • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
            • Re: [PATCH v3 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Jonathan Cameron
• [PATCH 5.4 v5 1/2] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [PATCH 5.10 v5 2/2] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
• [PATCH v2 0/5] Support ROHM BU27008 RGB sensor, Matti Vaittinen
  • [PATCH v2 1/5] dt-bindings: iio: light: ROHM BU27008, Matti Vaittinen
    • Re: [PATCH v2 1/5] dt-bindings: iio: light: ROHM BU27008, Krzysztof Kozlowski
  • [PATCH v2 2/5] iio:trigger: Add simple trigger_validation helper, Matti Vaittinen
    • Re: [PATCH v2 2/5] iio:trigger: Add simple trigger_validation helper, Andy Shevchenko
      • Re: [PATCH v2 2/5] iio:trigger: Add simple trigger_validation helper, Matti Vaittinen
  • [PATCH v2 3/5] iio: kx022a: Use new iio_validate_own_trigger(), Matti Vaittinen
  • [PATCH v2 5/5] MAINTAINERS: Add ROHM BU27008, Matti Vaittinen
  • [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
    • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
      • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
        • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Andy Shevchenko
    • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Andi Shyti
      • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
        • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Andi Shyti
          • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
            • Re: [PATCH v2 4/5] iio: light: ROHM BU27008 color sensor, Andi Shyti
• [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Alexander Stein
  • Re: [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Krzysztof Kozlowski
  • RE: [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Bough Chen
  • Re: [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Jonathan Cameron
    • Re: [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Alexander Stein
      • Re: [PATCH v2 1/1] dt-bindings: iio: imx8qxp-adc: add missing vref-supply, Jonathan Cameron
• [PATCH] iio: adc: palmas: Remove the unneeded include <linux/i2c.h>, Christophe JAILLET
  • Re: [PATCH] iio: adc: palmas: Remove the unneeded include <linux/i2c.h>, Jonathan Cameron
• [PATCH 4.14 v4 1/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [PATCH 4.19 v4 2/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [PATCH 5.4 v4 3/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
    • Re: [PATCH 5.4 v4 3/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, Greg Kroah-Hartman
  • [PATCH 5.10 v4 4/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
    • Re: [PATCH 5.10 v4 4/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, Greg Kroah-Hartman
      • Re: [PATCH 5.10 v4 4/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [PATCH 5.15 v4 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
• [PATCH v2] tools/counter: Add .gitignore, Rong Tao
  • Re: [PATCH v2] tools/counter: Add .gitignore, William Breathitt Gray
• [PATCH v2] tools/counter: Makefile: Remove lingering 'include' when make clean, Rong Tao
  • Re: [PATCH v2] tools/counter: Makefile: Remove lingering 'include' when make clean, William Breathitt Gray
    • Re: [PATCH v2] tools/counter: Makefile: Remove lingering 'include' when make clean, Rong Tao
  • Re: [PATCH v2] tools/counter: Makefile: Remove lingering 'include' when make clean, William Breathitt Gray
• Subject: [PATCH v1 0/7] Add mt7986 thermal and pwm, Frank Wunderlich
  • [PATCH v1 4/7] arm64: dts: mt7986: add PWM, Frank Wunderlich
    • Re: [PATCH v1 4/7] arm64: dts: mt7986: add PWM, Matthias Brugger
  • [PATCH v1 7/7] arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts, Frank Wunderlich
  • [PATCH v1 2/7] dt-bindings: iio: adc: Add support for MT7986, Frank Wunderlich
    • Re: [PATCH v1 2/7] dt-bindings: iio: adc: Add support for MT7986, Jonathan Cameron
      • Aw: Re: [PATCH v1 2/7] dt-bindings: iio: adc: Add support for MT7986, Frank Wunderlich
        • Re: [PATCH v1 2/7] dt-bindings: iio: adc: Add support for MT7986, Jonathan Cameron
  • [PATCH v1 6/7] arm64: dts: mt7986: add thermal-zones, Frank Wunderlich
    • Re: [PATCH v1 6/7] arm64: dts: mt7986: add thermal-zones, Matthias Brugger
  • [PATCH v1 1/7] dt-bindings: nvmem: mediatek: efuse: add support for mt7986, Frank Wunderlich
    • Re: [PATCH v1 1/7] dt-bindings: nvmem: mediatek: efuse: add support for mt7986, Rob Herring
    • Aw: [PATCH v1 1/7] dt-bindings: nvmem: mediatek: efuse: add support for mt7986, Frank Wunderlich
    • Re: [PATCH v1 1/7] dt-bindings: nvmem: mediatek: efuse: add support for mt7986, Matthias Brugger
  • [PATCH v1 5/7] arm64: dts: mt7986: add PWM to BPI-R3, Frank Wunderlich
    • Re: [PATCH v1 5/7] arm64: dts: mt7986: add PWM to BPI-R3, Matthias Brugger
  • [PATCH v1 3/7] arm64: dts: mt7986: add thermal and efuse, Frank Wunderlich
• [PATCH 0/4] Add support for IIO devices in ASoC, Herve Codina
  • [PATCH 2/4] iio: inkern: Add a helper to query an available minimum raw value, Herve Codina
    • Re: [PATCH 2/4] iio: inkern: Add a helper to query an available minimum raw value, Jonathan Cameron
      • Re: [PATCH 2/4] iio: inkern: Add a helper to query an available minimum raw value, Herve Codina
        • Re: [PATCH 2/4] iio: inkern: Add a helper to query an available minimum raw value, Jonathan Cameron
  • [PATCH 3/4] ASoC: soc-dapm.h: Add a helper to build a DAPM widget dynamically, Herve Codina
  • [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Herve Codina
    • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Rob Herring
      • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Mark Brown
      • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Herve Codina
        • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Krzysztof Kozlowski
          • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Mark Brown
            • Re: [PATCH 1/4] dt-bindings: sound: Add simple-iio-aux, Herve Codina
  • [PATCH 4/4] ASoC: codecs: Add support for the generic IIO auxiliary devices, Herve Codina
    • Re: [PATCH 4/4] ASoC: codecs: Add support for the generic IIO auxiliary devices, Jonathan Cameron
      • Re: [PATCH 4/4] ASoC: codecs: Add support for the generic IIO auxiliary devices, Herve Codina
        • Re: [PATCH 4/4] ASoC: codecs: Add support for the generic IIO auxiliary devices, Jonathan Cameron
• [PATCH] tools/counter: Makefile: Remove useless 'include' when make clean, Rong Tao
  • Re: [PATCH] tools/counter: Makefile: Remove useless 'include' when make clean, William Breathitt Gray
    • Re: [PATCH] tools/counter: Makefile: Remove useless 'include' when make clean, Rong Tao
• [PATCH] tools/counter: Add .gitignore, Rong Tao
  • Re: [PATCH] tools/counter: Add .gitignore, William Breathitt Gray
• [PATCH v2 1/2] iio: adc: stm32-adc: skip adc-diff-channels setup if none is present, Sean Nyekjaer
  • [PATCH v2 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Sean Nyekjaer
    • Re: [PATCH v2 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Jonathan Cameron
    • Re: [PATCH v2 2/2] iio: adc: stm32-adc: skip adc-channels setup if none is present, Olivier MOYSAN
• [PATCH] iio: adc: palmas: fix off by one bugs, Dan Carpenter
  • Re: [PATCH] iio: adc: palmas: fix off by one bugs, Jonathan Cameron
    • Re: [PATCH] iio: adc: palmas: fix off by one bugs, Patrik Dahlström
      • Re: [PATCH] iio: adc: palmas: fix off by one bugs, Jonathan Cameron
• [PATCH v1 0/3] Support ROHM BU27008 RGB sensor, Matti Vaittinen
  • [PATCH v1 1/3] dt-bindings: iio: light: ROHM BU27008, Matti Vaittinen
    • Re: [PATCH v1 1/3] dt-bindings: iio: light: ROHM BU27008, Krzysztof Kozlowski
      • Re: [PATCH v1 1/3] dt-bindings: iio: light: ROHM BU27008, Matti Vaittinen
  • [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
    • Re: [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
      • Re: [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Vaittinen, Matti
        • Re: [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
      • Re: [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Matti Vaittinen
        • Re: [PATCH v1 2/3] iio: light: ROHM BU27008 color sensor, Jonathan Cameron
  • Message not available
    • Re: [PATCH v1 3/3] MAINTAINERS: Add ROHM BU27008, Matti Vaittinen
  • Re: [PATCH v1 0/3] Support ROHM BU27008 RGB sensor, Jonathan Cameron
    • Re: [PATCH v1 0/3] Support ROHM BU27008 RGB sensor, Vaittinen, Matti
• [PATCH v3 0/3] Add the Renesas X9250 potentiometers IIO support, Herve Codina
  • [PATCH v3 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
    • Re: [PATCH v3 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Krzysztof Kozlowski
    • Re: [PATCH v3 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Jonathan Cameron
      • Re: [PATCH v3 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
        • Re: [PATCH v3 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Jonathan Cameron
  • [PATCH v3 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Herve Codina
    • Re: [PATCH v3 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Jonathan Cameron
      • Re: [PATCH v3 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Herve Codina
  • [PATCH v3 3/3] MAINTAINERS: add the Renesas X9250 driver entry, Herve Codina
• [PATCH v2] iio: adc: stm32-adc: add debug info if dt uses legacy channel config, Sean Nyekjaer
  • Re: [PATCH v2] iio: adc: stm32-adc: add debug info if dt uses legacy channel config, Jonathan Cameron
• [PATCH 0/2] Add support for the ICM 20600 IMU, Hermes Zhang
  • [PATCH 1/2] iio: imu: mpu6050: Add support for the ICM 20600 IMU, Hermes Zhang
    • Re: [PATCH 1/2] iio: imu: mpu6050: Add support for the ICM 20600 IMU, Jonathan Cameron
  • [PATCH 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Hermes Zhang
    • Re: [PATCH 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Krzysztof Kozlowski
      • Re: [PATCH 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Hermes Zhang
        • Re: [PATCH 2/2] dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050, Jonathan Cameron
• [PATCH] iio: fix doc for iio_gts_find_sel_by_int_time, Matti Vaittinen
  • Re: [PATCH] iio: fix doc for iio_gts_find_sel_by_int_time, Jonathan Cameron
• [PATCH v2] iio: light: al3320a: Handle ACPI device CALS0001, Marius Hoch
  • Re: [PATCH v2] iio: light: al3320a: Handle ACPI device CALS0001, Hans de Goede
    • Re: [PATCH v2] iio: light: al3320a: Handle ACPI device CALS0001, Jonathan Cameron
• [PATCH v2 0/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
  • [PATCH v2 1/5] dt-bindings: iio: Add KX132-1211 accelerometer, Mehdi Djait
    • Re: [PATCH v2 1/5] dt-bindings: iio: Add KX132-1211 accelerometer, Matti Vaittinen
    • Re: [PATCH v2 1/5] dt-bindings: iio: Add KX132-1211 accelerometer, Krzysztof Kozlowski
  • [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Mehdi Djait
    • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Matti Vaittinen
      • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Jonathan Cameron
        • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Jonathan Cameron
      • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Mehdi Djait
    • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Jonathan Cameron
      • Re: [PATCH v2 4/5] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer, Mehdi Djait
  • [PATCH v2 2/5] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Mehdi Djait
    • Re: [PATCH v2 2/5] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Matti Vaittinen
      • Re: [PATCH v2 2/5] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Jonathan Cameron
    • Re: [PATCH v2 2/5] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Jonathan Cameron
      • Re: [PATCH v2 2/5] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility, Mehdi Djait
  • [PATCH v2 3/5] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
    • Re: [PATCH v2 3/5] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Matti Vaittinen
      • Re: [PATCH v2 3/5] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Jonathan Cameron
        • Re: [PATCH v2 3/5] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure, Mehdi Djait
  • [PATCH v2 5/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
    • Re: [PATCH v2 5/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, kernel test robot
      • Re: [PATCH v2 5/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Andy Shevchenko
        • Re: [PATCH v2 5/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
          • Re: [PATCH v2 5/5] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer, Mehdi Djait
• [PATCH v3 0/3] Support Honeywell mprls0025pa pressure sensor, Andreas Klinger
  • [PATCH v3 1/3] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Andreas Klinger
    • Re: [PATCH v3 1/3] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Krzysztof Kozlowski
  • [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Andreas Klinger
    • Re: [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, kernel test robot
    • Re: [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor, Jonathan Cameron
  • [PATCH v3 3/3] MAINTAINERS: Add Honeywell mprls0025pa sensor, Andreas Klinger
• [PATCH] iio: light: al3320a: Handle ACPI device CALS0001, Marius Hoch
  • Re: [PATCH] iio: light: al3320a: Handle ACPI device CALS0001, Jonathan Cameron
• [PATCH v2 0/3] Add the Renesas X9250 potentiometers IIO support, Herve Codina
  • [PATCH v2 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
    • Re: [PATCH v2 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Krzysztof Kozlowski
      • Re: [PATCH v2 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
  • [PATCH v2 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Herve Codina
  • [PATCH v2 3/3] MAINTAINERS: add the Renesas X9250 driver entry, Herve Codina
• [PATCH v2] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write(), Dan Carpenter
  • Re: [PATCH v2] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write(), William Breathitt Gray
  • Re: [PATCH v2] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write(), Lee Jones
• [PATCH 0/3] Add the Renesas X9250 potentiometers IIO support, Herve Codina
  • [PATCH 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Herve Codina
    • Re: [PATCH 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Lars-Peter Clausen
      • Re: [PATCH 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers, Herve Codina
  • [PATCH 3/3] MAINTAINERS: add the Renesas X9250 driver entry, Herve Codina
  • [PATCH 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
    • Re: [PATCH 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Krzysztof Kozlowski
      • Re: [PATCH 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers, Herve Codina
• [PATCH AUTOSEL 5.15 4/7] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 5.4 1/2] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 5.10 2/3] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 6.1 06/15] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 6.2 06/17] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
  • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Nuno Sá
  • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Jonathan Cameron
    • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Nuno Sá
      • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Jonathan Cameron
        • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
    • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
      • Re: [PATCH v3] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
• [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), Dan Carpenter
  • Re: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), William Breathitt Gray
    • Re: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), Dan Carpenter
      • Re: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), William Breathitt Gray
  • RE: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), Biju Das
  • Re: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), William Breathitt Gray
    • Re: [PATCH] counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_write(), Dan Carpenter
• [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Luca Weiss
  • [PATCH v2 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Luca Weiss
    • Re: [PATCH v2 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Dmitry Baryshkov
  • [PATCH v2 7/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH v2 7/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Konrad Dybcio
  • [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Luca Weiss
    • Re: [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Lee Jones
      • Re: [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Luca Weiss
  • [PATCH v2 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Luca Weiss
    • Re: [PATCH v2 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Krzysztof Kozlowski
  • [PATCH v2 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Luca Weiss
    • Re: [PATCH v2 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Lee Jones
  • [PATCH v2 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Luca Weiss
    • Re: [PATCH v2 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Lee Jones
  • [PATCH v2 6/8] arm64: dts: qcom: Add PMI632 PMIC, Luca Weiss
    • Re: [PATCH v2 6/8] arm64: dts: qcom: Add PMI632 PMIC, Konrad Dybcio
  • [PATCH v2 5/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Luca Weiss
    • Re: [PATCH v2 5/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Lee Jones
  • Re: [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Linus Walleij
  • Re: [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Lee Jones
• [PATCH 5.15 89/91] counter: fix docum. build problems after filename change, Greg Kroah-Hartman
• [PATCH v2 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor, Stefan Windfeldt-Prytz
  • [PATCH v2 2/2] iio: light: Add support for TI OPT4001 light sensor, Stefan Windfeldt-Prytz
    • Re: [PATCH v2 2/2] iio: light: Add support for TI OPT4001 light sensor, Jonathan Cameron
  • [PATCH v2 1/2] dt-bindings: Document TI OPT4001 light sensor bindings, Stefan Windfeldt-Prytz
    • Re: [PATCH v2 1/2] dt-bindings: Document TI OPT4001 light sensor bindings, Krzysztof Kozlowski
• [PATCH v4 0/4] Refactor 104-quad-8 to match device operations, William Breathitt Gray
  • [PATCH v4 4/4] counter: 104-quad-8: Migrate to the regmap API, William Breathitt Gray
    • Re: [PATCH v4 4/4] counter: 104-quad-8: Migrate to the regmap API, Andy Shevchenko
      • Re: [PATCH v4 4/4] counter: 104-quad-8: Migrate to the regmap API, William Breathitt Gray
  • [PATCH v4 3/4] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC, William Breathitt Gray
  • [PATCH v4 2/4] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR, William Breathitt Gray
  • [PATCH v4 1/4] counter: 104-quad-8: Utilize bitfield access macros, William Breathitt Gray
  • Re: [PATCH v4 0/4] Refactor 104-quad-8 to match device operations, William Breathitt Gray
• [PATCH 0/2] iio: Fix integration time unit, Matti Vaittinen
  • [PATCH 1/2] iio: bu27034: Fix integration time, Matti Vaittinen
  • [PATCH 2/2] iio: gts-helpers: fix integration time units, Matti Vaittinen
    • Re: [PATCH 2/2] iio: gts-helpers: fix integration time units, Jonathan Cameron
      • Re: [PATCH 2/2] iio: gts-helpers: fix integration time units, Vaittinen, Matti
        • Re: [PATCH 2/2] iio: gts-helpers: fix integration time units, Jonathan Cameron
• [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Hans de Goede
  • Re: [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Marius Hoch
    • Re: [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Jonathan Cameron
      • Re: [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Linus Walleij
        • Re: [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Jonathan Cameron
      • Re: [PATCH] iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method, Hans de Goede
• [PATCH 0/3] Add Intel 8254 Counter support, William Breathitt Gray
  • [PATCH 1/3] counter: i8254: Introduce the Intel 8254 interface library module, William Breathitt Gray
    • Re: [PATCH 1/3] counter: i8254: Introduce the Intel 8254 interface library module, William Breathitt Gray
      • Re: [PATCH 1/3] counter: i8254: Introduce the Intel 8254 interface library module, Jarkko Nikula
        • Re: [PATCH 1/3] counter: i8254: Introduce the Intel 8254 interface library module, William Breathitt Gray
  • [PATCH 2/3] gpio: 104-dio-48e: Add Counter/Timer support, William Breathitt Gray
    • Re: [PATCH 2/3] gpio: 104-dio-48e: Add Counter/Timer support, Bartosz Golaszewski
    • Re: [PATCH 2/3] gpio: 104-dio-48e: Add Counter/Timer support, Linus Walleij
      • Re: [PATCH 2/3] gpio: 104-dio-48e: Add Counter/Timer support, William Breathitt Gray
  • [PATCH 3/3] iio: addac: stx104: Add 8254 Counter/Timer support, William Breathitt Gray
  • Re: [PATCH 0/3] Add Intel 8254 Counter support, andy . shevchenko
    • Re: [PATCH 0/3] Add Intel 8254 Counter support, William Breathitt Gray
• [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: add 16 ratio of pre-scaling, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: add 16 ratio of pre-scaling, Jonathan Cameron
    • Re: [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: add 16 ratio of pre-scaling, Krzysztof Kozlowski
• [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jiakai Luo
  • Re: [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jonathan Cameron
  • Re: [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jonathan Cameron
    • [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jiakai Luo
      • Re: [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jonathan Cameron
  • <Possible follow-ups>
  • [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jiakai Luo
    • Re: [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Jonathan Cameron
      • Re: [PATCH v2] iio: adc: mxs-lradc: fix the order of two cleanup operations, Dongliang Mu
• [PATCH v3 0/6] iio: st_sensors: Add lsm303d support, Marius Hoch
  • [PATCH v3 2/6] iio: magnetometer: st_accel: Add LSM303D, Marius Hoch
    • Re: [PATCH v3 2/6] iio: magnetometer: st_accel: Add LSM303D, Linus Walleij
  • [PATCH v3 1/6] iio: accel: st_accel: Add LSM303D, Marius Hoch
    • Re: [PATCH v3 1/6] iio: accel: st_accel: Add LSM303D, Linus Walleij
  • [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Marius Hoch
    • Re: [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Linus Walleij
    • Re: [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Marius Hoch
      • Re: [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Jonathan Cameron
  • [PATCH v3 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver, Marius Hoch
    • Re: [PATCH v3 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver, Linus Walleij
  • [PATCH v3 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY, Marius Hoch
    • Re: [PATCH v3 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY, Linus Walleij
  • [PATCH v3 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Marius Hoch
    • Re: [PATCH v3 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Krzysztof Kozlowski
      • Re: [PATCH v3 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Jonathan Cameron
  • Re: [PATCH v3 0/6] iio: st_sensors: Add lsm303d support, Hans de Goede
    • Re: [PATCH v3 0/6] iio: st_sensors: Add lsm303d support, Marius Hoch
    • Re: [PATCH v3 0/6] iio: st_sensors: Add lsm303d support, Hans de Goede
• [PULL] IIO: 2nd set of features for the 6.4 cycle., Jonathan Cameron
  • Re: [PULL] IIO: 2nd set of features for the 6.4 cycle., Greg KH
• [PATCH] iio: accel: bma400: Simplify an error message, Christophe JAILLET
• [PATCH] iio: ad4130: Make sure clock provider gets removed, Lars-Peter Clausen
  • Re: [PATCH] iio: ad4130: Make sure clock provider gets removed, Jonathan Cameron
• [PATCH v2 0/1] Support Honeywell mprls0025pa pressure sensor, Andreas Klinger
  • [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Andreas Klinger
    • Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Rob Herring
    • Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Krzysztof Kozlowski
      • Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor, Krzysztof Kozlowski
• [PATCH 2/2] iio:adc: add max14001 support, Kim Seer Paller
  • Re: [PATCH 2/2] iio:adc: add max14001 support, Jonathan Cameron
    • Re: [PATCH 2/2] iio:adc: add max14001 support, Kim Seer Paller
• [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings, Kim Seer Paller
  • Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings, Krzysztof Kozlowski
    • Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings, Jonathan Cameron
  • Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings, kernel test robot
• [PATCH v2] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
  • Re: [PATCH v2] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Nuno Sá
    • Re: [PATCH v2] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag, Masahiro Honda
• [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error, Lars-Peter Clausen
  • Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error, Nuno Sá
    • Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error, Gerald Loacker
      • Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error, Jonathan Cameron
• [PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Luca Weiss
  • [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Luca Weiss
    • Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Konrad Dybcio
    • Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Pavel Machek
  • [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Luca Weiss
    • Re: [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Krzysztof Kozlowski
  • [PATCH 7/8] arm64: dts: qcom: Add PMI632 PMIC, Luca Weiss
  • [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Konrad Dybcio
      • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Pavel Machek
      • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
  • [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Luca Weiss
    • Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Krzysztof Kozlowski
      • Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Jonathan Cameron
  • [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Luca Weiss
    • Re: [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Krzysztof Kozlowski
  • [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Luca Weiss
    • Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Krzysztof Kozlowski
    • Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Pavel Machek
  • [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Luca Weiss
    • Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Konrad Dybcio
    • Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Linus Walleij
• [PATCH v2] counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe, Uwe Kleine-König
  • Re: [PATCH v2] counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe, William Breathitt Gray
• [PATCH v2 0/3] iio: adc: ad7192: Functional fixes, Fabrizio Lamarque
  • [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe, Fabrizio Lamarque
    • [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection, Fabrizio Lamarque
      • [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
        • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Nuno Sá
          • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
            • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Nuno Sá
        • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Krzysztof Kozlowski
          • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
            • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Krzysztof Kozlowski
              • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
                • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Krzysztof Kozlowski
                  • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
                    • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Jonathan Cameron
                      • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Fabrizio Lamarque
                        • Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation, Jonathan Cameron
      • Re: [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection, Nuno Sá
      • Re: [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection, Jonathan Cameron
    • Re: [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe, Nuno Sá
    • Re: [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe, Jonathan Cameron
• [PATCH v2 0/6] iio: st_sensors: Add lsm303d support, Marius Hoch
  • [PATCH v2 1/6] iio: accel: st_accel: Add LSM303D, Marius Hoch
  • [PATCH v2 2/6] iio: magnetometer: st_accel: Add LSM303D, Marius Hoch
  • [PATCH v2 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver, Marius Hoch
  • [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Marius Hoch
    • Re: [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Jonathan Cameron
      • Re: [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, Marius Hoch
  • [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Marius Hoch
    • Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Krzysztof Kozlowski
      • Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Jonathan Cameron
        • Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Marius Hoch
        • Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, Krzysztof Kozlowski
  • [PATCH v2 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY, Marius Hoch
• [PATCH AUTOSEL 4.14] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
  • <Possible follow-ups>
  • [PATCH AUTOSEL 4.14] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 4.19 1/2] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
  • <Possible follow-ups>
  • [PATCH AUTOSEL 4.19 1/2] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 5.4 1/3] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 5.10 2/4] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 5.15 4/8] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 6.1 06/17] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH AUTOSEL 6.2 06/20] iio: adc: palmas_gpadc: fix NULL dereference on rmmod, Sasha Levin
• [PATCH] iio: st_sensors: Add lsm303d support, mail
  • [PATCH] iio: accel: st_accel: Add LSM303D, mail
  • [PATCH] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver, mail
  • [PATCH] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer, mail
  • [PATCH] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, mail
    • Re: [PATCH] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver, kernel test robot
  • [PATCH] iio: magnetometer: st_accel: Add LSM303D, mail
  • [PATCH] iio: Comment that the LSM303D also has the Magnetometer DRDY, mail
• [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value, Uwe Kleine-König
  • Re: [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value, Fabrice Gasnier
  • Re: [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value, Lee Jones
    • Re: [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value, Uwe Kleine-König
• [PATCH 0/3] iio: Fix integration time units for iio-gts, Matti Vaittinen
  • [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO, Matti Vaittinen
    • Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO, Jonathan Cameron
      • Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO, Matti Vaittinen
        • Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO, Jonathan Cameron
  • [PATCH 2/3] iio: gts: fix units of available integration times, Matti Vaittinen
  • [PATCH 3/3] iio: bu27034: Fix integration time units, Matti Vaittinen
• [PATCH v7 0/5] Add MAX77541/MAX77540 PMIC Support, Okan Sahin
  • [PATCH v7 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support, Okan Sahin
    • Re: [PATCH v7 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support, Mark Brown
    • Re: [PATCH v7 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support, Lee Jones
  • [PATCH v7 1/5] dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator, Okan Sahin
    • Re: [PATCH v7 1/5] dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator, Lee Jones
  • [PATCH v7 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support, Okan Sahin
    • Re: [PATCH v7 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support, Andy Shevchenko
    • Re: [PATCH v7 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support, Lee Jones
  • [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Okan Sahin
    • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Andy Shevchenko
    • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
      • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
        • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
          • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
            • RE: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Sahin, Okan
              • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Rob Herring
                  • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                    • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Rob Herring
                      • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, William Breathitt Gray
                        • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                          • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Rob Herring
                            • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                              • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Rob Herring
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Rob Herring
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
                                • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                      • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
                    • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Mark Brown
    • Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support, Lee Jones
  • [PATCH v7 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540, Okan Sahin
    • Re: [PATCH v7 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540, Lee Jones
• [PULL] IIO: 1st set of new device support, features and cleanup for 6.4, Jonathan Cameron
  • Re: [PULL] IIO: 1st set of new device support, features and cleanup for 6.4, Greg KH
• [RESEND PATCH 4.14 v3 1/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [RESEND PATCH 4.19 v3 2/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [RESEND PATCH 5.4 v3 3/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [RESEND PATCH 5.10 v3 4/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
  • [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
    • Re: [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
      • Re: [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, Greg Kroah-Hartman
        • Re: [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
      • Re: [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, Pavel Machek
        • Re: [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads, William Breathitt Gray
• [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor, Subhajit Ghosh
  • [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings, Subhajit Ghosh
    • Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings, Rob Herring
      • Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings, Subhajit Ghosh
    • Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings, Krzysztof Kozlowski
      • Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings, Subhajit Ghosh
  • [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Subhajit Ghosh
    • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Andy Shevchenko
      • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Subhajit Ghosh
        • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Andy Shevchenko
          • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Subhajit Ghosh
    • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Jonathan Cameron
      • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Subhajit Ghosh
        • Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor, Jonathan Cameron
  • Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor, Jonathan Cameron
    • Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor, Subhajit Ghosh
      • Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor, Jonathan Cameron
        • Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor, Subhajit Ghosh
• [PATCH v4 0/5] dts: qcom: Use labels with generic node names for ADC channels, Marijn Suijten
  • [PATCH v4 1/5] ARM: dts: qcom: Use labels with generic node names for ADC channels, Marijn Suijten
  • [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples, Marijn Suijten
    • Re: [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples, Krzysztof Kozlowski
    • Re: [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples, Daniel Lezcano
  • [PATCH v4 2/5] arm64: dts: qcom: Use labels with generic node names for ADC channels, Marijn Suijten
  • [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples, Marijn Suijten
    • Re: [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples, Krzysztof Kozlowski
    • Re: [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples, Lee Jones
  • [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Marijn Suijten
    • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Krzysztof Kozlowski
    • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Jonathan Cameron
      • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Marijn Suijten
        • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Jonathan Cameron
          • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Jonathan Cameron
            • Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes, Marijn Suijten
• [PULL] IIO fixes for 6.3 set 2, Jonathan Cameron
  • Re: [PULL] IIO fixes for 6.3 set 2, Greg KH
• [PATCH] counter: 104-quad-8: Migrate to the regmap API, William Breathitt Gray
  • Re: [PATCH] counter: 104-quad-8: Migrate to the regmap API, Andy Shevchenko
• [PATCH v3 0/3] Refactor 104-quad-8 to match device operations, William Breathitt Gray
  • [PATCH v3 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR, William Breathitt Gray