The MCP4725 has external voltage reference compared MCP4725 which has reference embeedded in eeprom. Add use_ext_ref_voltage variable to struct mcp4725_chip_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- v3: * New patch --- drivers/iio/dac/mcp4725.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index fe8981ec7923..9cbea6f223e4 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -33,6 +33,7 @@ struct mcp4725_chip_info { const struct iio_chan_spec *chan_spec; unsigned int chip_id; + bool use_ext_ref_voltage; }; struct mcp4725_data { @@ -416,7 +417,7 @@ static int mcp4725_probe(struct i2c_client *client) pdata = &pdata_dt; } - if (info->chip_id == MCP4725 && pdata->use_vref) { + if (info->use_ext_ref_voltage && pdata->use_vref) { dev_err(&client->dev, "external reference is unavailable on MCP4725"); return -EINVAL; @@ -472,10 +473,10 @@ static int mcp4725_probe(struct i2c_client *client) data->powerdown = pd > 0; data->powerdown_mode = pd ? pd - 1 : 2; /* largest resistor to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); - if (info->chip_id == MCP4726) + if (!info->use_ext_ref_voltage) ref = (inbuf[3] >> 3) & 0x3; - if (info->chip_id == MCP4726 && ref != data->ref_mode) { + if (!info->use_ext_ref_voltage && ref != data->ref_mode) { dev_info(&client->dev, "voltage reference mode differs (conf: %u, eeprom: %u), setting %u", data->ref_mode, ref, data->ref_mode); @@ -515,6 +516,7 @@ static void mcp4725_remove(struct i2c_client *client) static const struct mcp4725_chip_info mcp4725 = { .chan_spec = &mcp472x_channel[MCP4725], .chip_id = MCP4725, + .use_ext_ref_voltage = true, }; static const struct mcp4725_chip_info mcp4726 = { -- 2.25.1