Linux IIO Development

• Thread Index

• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add Xilinx AMS driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable device after trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 0/3] Add support for PNI RM3100 magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: sx932x: Add driver for Semtech sx932x proximity sensor
  • From: Enrico Granata <egranata@xxxxxxxxxx>
• Re: [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3 3/3] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3 3/3] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 0/3] staging: iio: ad7780: correct driver read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 2/3] staging: iio: ad2s1210: Drop the gpioin flag.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 0/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 08/11] arm64: dts: allwinner: a64: pinebook: enable power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 07/11] arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 06/11] arm64: dts: allwinner: axp803: add AC and battery power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 09/11] power: supply: add AC power supply driver for AXP813
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 00/11] AXP8x3 AC and battery power supply support
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: dac: Add ti,dac7311 device tree bindings in documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [no subject]
  • From: <stefan.popa@xxxxxxxxxx>
• [PATCH v3 1/3] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add Xilinx AMS driver
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 3/3] arm64: zynqmp: DT: Add Xilinx AMS node
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 0/3] Add Xilinx AMS Driver
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• RE: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v6 3/3] staging: iio: ad2s1210: Add device tree support.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio:magnetometer: st_magn: add BDU settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: dac: Add ti,dac7311 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: fix offset read value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: potentiometer: tpl0102: switch to using pointer to chip config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] doc:devicetree: Add AD7949 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad5933: Remove unnecessary blank line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad5933: Remove unnecessary space on casting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad2s1210: Add device tree support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] staging: iio: ad2s1210: Add device tree support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Work plan on ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 5/7] ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 4/7] ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: meson8: add the temperature calibration data for the SAR ADC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: iio: adc: meson-saradc: add temperature sensor support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/7] meson-saradc: add chip temperature support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc128s052: use SPDX-License-Identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 3/3] staging: iio: ad2s1210: Add device tree support.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v6 2/3] staging: iio: ad2s1210: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v6 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v6 0/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad2s1210: Add device tree support.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad2s1210: Add device tree support.
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 3/6] staging:iio:ad2s90: Remove always overwritten assignment
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 4/6] staging:iio:ad2s90: Move device registration to the end of probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 6/6] staging:iio:ad2s90: Check channel type at read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• RE: [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• [PATCH 2/2] iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Carlos Iglesias <carlos.iglesias@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Carlos Iglesias <carlos.iglesias@xxxxxxxxxx>
• [PATCH 0/2] iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Carlos Iglesias <carlos.iglesias@xxxxxxxxxx>
• [PATCH 1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v5 2/2] staging: iio: ad2s1210: Add device tree support.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v5 1/2] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v5 0/2] staging: iio: ad2s1210: Switch to the gpio descriptor interface.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: "Dan O'Donovan" <dan@xxxxxxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] iio:magnetometer: st_magn: add BDU settings
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 3/6] staging:iio:ad2s90: Remove always overwritten assignment
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 4/6] staging:iio:ad2s90: Move device registration to the end of probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 6/6] staging:iio:ad2s90: Check channel type at read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 2/2] staging: iio: ad7780: fix offset read value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v2 0/2] staging: iio: ad7780: correct driver read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• RE: [PATCH 1/2] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 00/11] AXP8x3 AC and battery power supply support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v4 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] iio: adc128s052: add matching options
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: update voltage on read
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: "Dan O'Donovan" <dan@xxxxxxxxxx>
• [PATCH v3 0/3] iio: adc128s052: add matching options
  • From: "Dan O'Donovan" <dan@xxxxxxxxxx>
• [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: "Dan O'Donovan" <dan@xxxxxxxxxx>
• [PATCH v3 3/3] iio: adc128s052: use SPDX-License-Identifier
  • From: "Dan O'Donovan" <dan@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: update voltage on read
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: update voltage on read
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v5 11/11] mfd: axp20x: Add supported cells for AXP803
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 10/11] mfd: axp20x: Add AC power supply cell for AXP813
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 09/11] power: supply: add AC power supply driver for AXP813
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/2] iio: potentiometer: tpl0102: switch to using pointer to chip config
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 1/2] iio: potentiometer: tpl0102: switch to using pointer to chip config
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 0/2] iio: potentiometer: tpl0102: improve driver to report steps/range
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/2] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 05/11] ARM: dts: axp81x: add AC power supply subnode
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 01/11] dt-bindings: power: supply: axp20x: add AXP813 AC power DT binding
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 06/11] arm64: dts: allwinner: axp803: add AC and battery power supplies
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 11/11] mfd: axp20x: Add supported cells for AXP803
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 09/11] power: supply: add AC power supply driver for AXP813
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 10/11] mfd: axp20x: Add AC power supply cell for AXP813
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 07/11] arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 08/11] arm64: dts: allwinner: a64: pinebook: enable power supplies
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH v5 00/11] AXP8x3 AC and battery power supply support
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• Re: [PATCH V3 2/2] doc:devicetree: Add ti,dac7311 device tree bindings in documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3 2/2] doc:devicetree: Add AD7949 device tree bindings in documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Work plan on ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Questions related to some drivers
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• [PATCH V3 2/2] doc:devicetree: Add ti,dac7311 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH V3 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH V3 2/2] doc:devicetree: Add AD7949 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 2/2] staging: iio: ad5933: Remove unnecessary blank line
  • From: Victor Colombo <victorcolombo@xxxxxxxxx>
• [PATCH 1/2] staging: iio: ad5933: Remove unnecessary space on casting
  • From: Victor Colombo <victorcolombo@xxxxxxxxx>
• [PATCH 0/2] staging: iio: ad5933: Remove unnecessary spaces
  • From: Victor Colombo <victorcolombo@xxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v2] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH 09/10] tools iio: Override CFLAGS assignments
  • From: Jiri Olsa <jolsa@xxxxxxxxxx>
• RE: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2 1/2] Add AD7949 ADC driver family
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/2] Add AD7949 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• OSS Edinburgh
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Add ti,dac7311 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][V2] iio: adc: ina2xx: add in early -EINVAL returns in case statements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] Staging iio: adc: Match parenthesis alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: st_sensors: miscellaneous cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] staging: iio: adc: ad7280a: handle error from __ad7280_read32()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] tools iio: Override CFLAGS assignments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• RE: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• [PATCH 1/1] staging: iio: adc: ad7280a: handle error from __ad7280_read32()
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Work plan on ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 1/3] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add ad7124 support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v3 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: Move out of staging
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Alexandru M Stan <amstan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: Move out of staging
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: Move out of staging
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 1/2] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [no subject]
  • From: <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] Add AD7949 ADC driver family
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCHv2 1/2] Add AD7949 ADC driver family
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: Questions related to some drivers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] Staging iio/adc: fixes parenthesis alignment
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v2] Staging iio: adc: Match parenthesis alignment
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCHv2 2/2] Add AD7949 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCHv2 1/2] Add AD7949 ADC driver family
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 2/2] Add ti,dac7311 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Questions related to some drivers
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• Re: [PATCH] Staging iio/adc: fixes parenthesis alignment
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v9 00/11] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Paresh Chaudhary <paresh.chaudhary@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• Re: [PATCH][V2] iio: adc: ina2xx: add in early -EINVAL returns in case statements
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: Add comments to prevent checks corrections
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: Add comments to prevent checks corrections
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH][V2] iio: adc: ina2xx: add in early -EINVAL returns in case statements
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] Staging iio/adc: fixes parenthesis alignment
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Paresh Chaudhary <paresh.chaudhary@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH] staging: iio: adc: Add comments to prevent checks corrections
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: miscellaneous cleanup
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2] iio: st_sensors: miscellaneous cleanup
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH] staging: iio: adc: Add comments to prevent checks corrections
  • From: Gabriel Capella <gabriel@xxxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: miscellaneous cleanup
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: miscellaneous cleanup
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: miscellaneous cleanup
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4922: Add powerdown support
  • From: Sean Nyekjær <Sean.Nyekjaer@xxxxxxxxx>
• [RFC][PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH] iio: st_sensors: miscellaneous cleanup
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add KIOX0009 ACPI Hardware-ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add KIOX0009 ACPI Hardware-ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Declaring a SPI slave device
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] staging: iio: adt7316: fix parenthesis alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: fix missing break statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add AD7949 ADC driver family
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4922: Add powerdown support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matthew Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: accel: kxcjk1013: Add KIOX0009 ACPI Hardware-ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v4 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v4 0/3] Add support for PNI RM3100 magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: fix 2 checks
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: fix 2 checks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: fix missing break statement
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Declaring a SPI slave device
  • From: 최광호 <cgh9046@xxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: fix missing break statement
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: fix missing break statement
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4922: Add powerdown support
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, IIO and Input due for the v4.20 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/5] Input: ti_am335x_tsc: Mark IRQ as wakeup capable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionally
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/5] mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/5] Input: ti_am335x_tsc: Mark TSC device as wakeup source
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] mfd: ti_am335x_tscadc: Don't mark TSCADC MFD as wakeup capable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] Add AD7949 ADC driver family
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add AD7949 ADC driver family
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3] staging: iio: adt7316: fix parenthesis alignment
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: adt7316: fix parenthesis alignment
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v2] staging: iio: adt7316: fix parenthesis alignment
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add AD7949 ADC driver family
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH] iio: adc: ina2xx: fix missing break statement
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Mark expected switch fall-throughs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad2s1210: fix 'assignment operator' style checks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: add compatibles for AXP803 AC and battery power supplies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: CONFIG_IIO_TRIGGERED_BUFFER lacks Kconfig description
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4922: Add powerdown support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: amplifiers: ad8366: Add support for the ADA4961 DGA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: dpot-dac: mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] iio: cros_ec_accel_legacy: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH v2] staging: iio: ad2s1210: fix 'assignment operator' style checks
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH 4/4] staging: iio: ad5933: Add of_device_id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] staging: iio: ad5933: Use the clock framework for the external clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] staging: iio: ad5933: Add regulator binding for vref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: fix parenthesis alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: cdc: ad7150: fix misaligned lines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: cdc: ad7150: use value copy to shorten the line length
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ssp_sensors: don't manually free devm managed resources
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: fix 'assignment operator' style checks
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: fix 'assignment operator' style checks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] Add ti,dac7311 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add AD7949 ADC driver family
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Add ad7949 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] staging: iio: ad5933: rename ext_clk_Hz -> ext_clk_hz
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: Add PNI RM3100 device tree binding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: Add PNI RM3100 device tree binding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] Add ti,dac7311 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 1/2] Add driver for Texas Instrument DAC7311 It is a driver for Texas Instruments 8/10/12-bit 1-channel compatible with DAC6311 and DAC5311 chips.
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 2/2] Add ad7949 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH 1/2] Add AD7949 ADC driver family
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: fix 2 checks
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH] Add AD7949 ADC driver family
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7280a: fix 2 checks
  • From: Gabriel Capella <gabriel@xxxxxxxxxxx>
• Re: [PATCH v2 05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] staging: iio: ad2s1210: fix 'assignment operator' style checks
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: ssp_sensors: don't manually free devm managed resources
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] power: supply: add AXP803/AXP813 AC and battery power supply support
  • From: Oskari Lemmelä <oskari@xxxxxxxxxxx>
• Re: [PATCH 4/4] power: supply: add AXP803/AXP813 AC and battery power supply support
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH v2 2/2] staging: iio: cdc: ad7150: fix misaligned lines
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: cdc: ad7150: use value copy to shorten the line length
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 0/2] Fix style problems in ad7150 driver
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] staging: iio: adt7316: fix parenthesis alignment
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH 2/4] ARM: dtsi: axp81x: add AC power supply subnode
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH 0/4] AXP8x3 AC and battery power supply support
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH 3/4] arm64: allwinner: a64: add battery and AC power supply support
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: add compatibles for AXP803 AC and battery power supplies
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• [PATCH 4/4] power: supply: add AXP803/AXP813 AC and battery power supply support
  • From: Oskari Lemmela <oskari@xxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: cdc: ad7150: use pointer to shorten the line length
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: cdc: ad7150: use pointer to shorten the line length
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v5 0/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• CONFIG_IIO_TRIGGERED_BUFFER lacks Kconfig description
  • From: David Frey <dpfrey@xxxxxxxxx>
• [PATCH] iio: dac: mcp4922: Add powerdown support
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: Add PNI RM3100 device tree binding.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v3 0/3] Add support for PNI RM3100 magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: amplifiers: ad8366: Add support for the ADA4961 DGA
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4] staging: iio: ad5933: Add of_device_id table
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/4] staging: iio: ad5933: Use the clock framework for the external clock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/4] staging: iio: ad5933: Add regulator binding for vref
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4] staging: iio: ad5933: rename ext_clk_Hz -> ext_clk_hz
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support, cleanups etc for 4.20
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• [PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• [PATCH 2/2] staging: iio: cdc: ad7150: fix misaligned lines
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/2] staging: iio: cdc: ad7150: use pointer to shorten the line length
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 0/2] Fix style problems in ad7150 driver
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PULL] Second set of IIO new device support, cleanups etc for 4.20
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] staging: iio: adc: add missing spaces around minus sign
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Bad MAINTAINERS pattern in section 'RENESAS R-CAR GYROADC DRIVER'
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• [PATCH] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad5064: Fix regulator handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: use the address attribute from iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Bad MAINTAINERS pattern in section 'RENESAS R-CAR GYROADC DRIVER'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: ad5064: Fix regulator handling
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 2/2] iio: light: bh1750: Add device tree support
  • From: ryang <decatf@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: ryang <decatf@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: magnetometer: Add DT support for PNI RM3100
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH 1/2] iio: magnetometer: Add DT support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH 2/2] iio: adc: meson-saradc: use the address attribute from iio_chan_spec
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/2] meson-saradc: preparations for temperature sensor support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/3] iio: adc: meson-saradc: simplify access to meson_sar_adc_param
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: meson-saradc: use of_device_get_match_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: bh1750: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH 1/3] iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: meson-saradc: simplify access to meson_sar_adc_param
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: meson-saradc: use of_device_get_match_data
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/3] meson-saradc: small code improvements
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: light: bh1750: Add device tree support
  • From: ryang <decatf@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: ryang <decatf@xxxxxxxxx>
• [PATCH v3 2/2] iio: light: bh1750: Add device tree support
  • From: ryang <decatf@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: ryang <decatf@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: bh1750: Add device tree support
  • From: r yang <decatf@xxxxxxxxx>
• [PATCH v2 2/2] iio: light: bh1750: Add device tree support
  • From: ryang <decatf@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation
  • From: ryang <decatf@xxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging:iio:ad7606: Add support for the ad7605-4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v5] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] staging:iio:ad7606: update structs with doc annotations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: bh1750: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: bh1750: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] staging:iio:ad7606: update structs with doc annotations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix potential integer overflow
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Clean up redundant code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Clean up redundant code.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Replace a return value.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Fixed a comment error.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Clean up redundant code.
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: bh1750: Add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Clean up redundant code.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: bh1750: Add device tree support
  • From: r yang <decatf@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH] iio: magnetometer: hmc5843: Clean up redundant code.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: magnetometer: hmc5843: Fixed a comment error.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] iio: magnetometer: hmc5843: Replace a return value.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH 2/2] iio: adc: at91: fix wrong channel number in triggered buffer mode
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>