Linux Kernel I2C

• Thread Index

• RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: i2c-i801 partially broken on Lynx Point PCH?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH 1/2] i2c: qup: Cleared the error bits in ISR
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ipmi: Handle I2C parms in the SSIF driver.
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c-smbus: Allow parms to be passed in from sysfs new_device
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: Add parameters to sysfs-added i2c devices
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v8 0/8] i2c-octeon and i2c-thunderx driver
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] dt-bindings: i2c: rk3x: add support for rk3399
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] i2c: st: Implement bus clear
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• RE: i2c-i801 partially broken on Lynx Point PCH?
  • From: "Heasley, Seth" <seth.heasley@xxxxxxxxx>
• RE: [PATCH 1/2] i2c: qup: Cleared the error bits in ISR
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: Document the STM32 I2C bindings
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• [PATCH 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• [PATCH 2/5] i2c: Add STM32F4 I2C driver
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• [PATCH 5/5] ARM: configs: Add I2C support for STM32 defconfig
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• [PATCH v2] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
  • From: Marc Gonzalez <marc_gonzalez@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: dts: Add I2C1 support for STM32429 eval board
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• [PATCH 0/5] Add support for the STM32F4 I2C
  • From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH] i2c-algo-bit: declare i2c_bit_quirk_no_clk_stretch as static
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mux-pca9541: fix setup_timer.cocci warnings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
  • From: Mason <slash.tmp@xxxxxxx>
• Re: [PATCH v8 1/8] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/4] i2c: tegra: proper handling of error cases
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] i2c: tegra: calculate timeout for config load when needed
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/4] i2c: tegra: disable clock before returning error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
  • From: Mason <slash.tmp@xxxxxxx>
• Re: [PATCH v8 8/8] i2c: rk3x: support fast-mode plus for rk3399
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• Re: [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: i2c-i801 partially broken on Lynx Point PCH?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• i2c-i801 partially broken on Lynx Point PCH?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v8 8/8] i2c: rk3x: support fast-mode plus for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 6/8] dt-bindings: i2c: rk3x: add support for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 5/8] i2c: rk3x: Move spec timing data to "static const" structs
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 3/8] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 4/8] i2c: rk3x: Change SoC data to not use array
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 2/8] i2c: rk3x: use struct "rk3x_i2c_calced_timings"
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 1/8] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v8 0/8] add i2c driver supported for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Scott Wood <oss@xxxxxxxxxxxx>
• [PATCH v2 1/3] i2c: Add parameters to sysfs-added i2c devices
  • From: minyard@xxxxxxx
• [PATCH v2 0/3] Add parameters for sysfs added I2C devices
  • From: minyard@xxxxxxx
• [PATCH v2 3/3] ipmi: Handle I2C parms in the SSIF driver.
  • From: minyard@xxxxxxx
• [PATCH v2 2/3] i2c-smbus: Allow parms to be passed in from sysfs new_device
  • From: minyard@xxxxxxx
• [PATCH] cocci: Provide script to find i2c_tables missing exports
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCH] cocci: Find i2c drivers with an of_device table that isn't exported
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: qup: support SMBus block read
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] i2c: qup: add ACPI support
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 7/8] mfd: 88pm860x: Move over to new I2C device .probe() call
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 6/8] i2c: Provide a temporary .probe_new() call-back type
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 5/8] i2c: Export i2c_match_id() for direct use by device drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 4/8] i2c: Make I2C ID tables non-mandatory for DT'ed devices
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 3/8] i2c: Match using traditional OF methods, then by vendor-less compatible strings
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 2/8] i2c: Add the ability to match device to compatible string without an of_node
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 1/8] i2c: Add pointer dereference protection to i2c_match_id()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: I2C driver for LTC1760 dual smart battery system manager
  • From: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: qup: Fixed the DMA segments length
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: qup: Cleared the error bits in ISR
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 0/2] i2c: qup: Fixed the DMA transfer errors
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 07/10] efi: load SSTDs from EFI variables
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxxx>
• Re: I2C driver for LTC1760 dual smart battery system manager
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 07/10] efi: load SSTDs from EFI variables
  • From: Jon Masters <jcm@xxxxxxxxxx>
• Re: I2C driver for LTC1760 dual smart battery system manager
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: I2C driver for LTC1760 dual smart battery system manager
  • From: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 8/9] i2c: rk3x: add i2c support for rk3399 soc
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [V2,2/2] drivers: i2c: qup: Fix error handling
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [V2, 1/2] drivers: i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 0/2] drivers: i2c: qup: Some misc fixes
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V2 1/2] drivers: i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V2 2/2] drivers: i2c: qup: Fix error handling
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH v7 8/9] i2c: rk3x: add i2c support for rk3399 soc
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: I2C driver for LTC1760 dual smart battery system manager
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v7 6/9] i2c: rk3x: Move spec timing data to "static const" structs
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drivers: i2c: qup: Fix error handling
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH v7 4/9] i2c: rk3x: Move setting STATE_START and add STATE_SETUP
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/9] i2c: rk3x: use struct "rk3x_i2c_calced_timings"
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v7 9/9] i2c: rk3x: support fast-mode plus for rk3399
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v7 9/9] i2c: rk3x: support fast-mode plus for rk3399
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 8/9] i2c: rk3x: add i2c support for rk3399 soc
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 6/9] i2c: rk3x: Move spec timing data to "static const" structs
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 5/9] i2c: rk3x: Change SoC data to not use array
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 4/9] i2c: rk3x: Move setting STATE_START and add STATE_SETUP
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 3/9] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 2/9] i2c: rk3x: use struct "rk3x_i2c_calced_timings"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [v10, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: rcar: add DMA support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 5/9] i2c: rk3x: Change SoC data to not use array
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] i2c: qup: use address helper function in read transfer
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [15/18] i2c: i2c-qup: use new 8 bit address helper function
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c, i2c_imc: Add DIMM bus code
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drivers: i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: i2c: qup: Fix error handling
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• Re: [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• Re: [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• RE: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
  • From: Qiang Zhao <qiang.zhao@xxxxxxx>
• [v10, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 2/7] ARM64: dts: ls2080a: add device configuration node
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 3/7] soc: fsl: add GUTS driver for QorIQ platforms
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 4/7] dt: move guts devicetree doc out of powerpc directory
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 6/7] MAINTAINERS: add entry for Freescale SoC drivers
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v10, 0/7] Fix eSDHC host version register bug
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• RE: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• Re: [PATCH v7 1/9] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 1/9] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v9 0/9] i2c mux cleanup and locking update
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v9 1/9] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 0/9] i2c mux cleanup and locking update
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 3/9] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 2/9] i2c: muxes always lock the parent adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 5/9] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 4/9] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 6/9] [media] si2168: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 7/9] [media] rtl2832: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 9/9] [media] rtl2832: regmap is aware of lockdep, drop local locking hack
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v9 8/9] [media] rtl2832_sdr: get rid of empty regmap wrappers
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] drivers: i2c: qup: Some misc fixes
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] add missing UARTs pins and I2C entriesfor AllWinner H3 DTSI
  • From: martinayotte@xxxxxxxxx
• Re: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
  • From: Scott Wood <oss@xxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCHv5 2/8] i2c: Add the ability to match device to compatible string without an of_node
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 1/8] i2c: Add pointer dereference protection to i2c_match_id()
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 4/8] i2c: Make I2C ID tables non-mandatory for DT'ed devices
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 3/8] i2c: Match using traditional OF methods, then by vendor-less compatible strings
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 6/8] i2c: Provide a temporary .probe_new() call-back type
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 7/8] mfd: 88pm860x: Move over to new I2C device .probe() call
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 5/8] i2c: Export i2c_match_id() for direct use by device drivers
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
• [PATCH v7 9/9] i2c: rk3x: support fast-mode plus for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 8/9] i2c: rk3x: add i2c support for rk3399 soc
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 6/9] i2c: rk3x: Move spec timing data to "static const" structs
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 5/9] i2c: rk3x: Change SoC data to not use array
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 0/9] add i2c driver supported for rk3399
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 1/9] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 4/9] i2c: rk3x: Move setting STATE_START and add STATE_SETUP
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 2/9] i2c: rk3x: use struct "rk3x_i2c_calced_timings"
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH v7 3/9] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: rcar: add DMA support
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [v9, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 0/7] Fix eSDHC host version register bug
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 2/7] ARM64: dts: ls2080a: add device configuration node
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 3/7] soc: fsl: add GUTS driver for QorIQ platforms
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 4/7] dt: move guts devicetree doc out of powerpc directory
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v9, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• Re: [PATCH 02/12] eeprom: at24: remove nvmem regmap dependency
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/2] i2c: qup: support SMBus block read
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: qup: add ACPI support
  • From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
• Re: [PATCH v7 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/1] i2c-dev: switch from register_chrdev to cdev API
  • From: Erico Nunes <erico.nunes@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 04/13] eeprom: at24: make locking more fine-grained
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [RFC] i2c: device-tree: Handling child nodes which are not i2c devices
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC] i2c: device-tree: Handling child nodes which are not i2c devices
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c, i2c_imc: Add DIMM bus code
  • From: "Elliott, Robert (Persistent Memory)" <elliott@xxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Antti Palosaari <crope@xxxxxx>
• [PATCH v8 4/8] i2c: thunderx: Add smbus alert support
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 5/8] i2c: octeon,thunderx: Move register offsets to struct
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 6/8] i2c: octeon: Sort include files alphabetically
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 7/8] i2c: cavium: Use booleon values for booleon variables
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 8/8] i2c: octeon: thunderx: Add MAINTAINERS entry
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 3/8] i2c: thunderx: Add i2c driver for ThunderX SOC
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 2/8] i2c: octeon: Split the driver into two parts
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 1/8] i2c: octeon: Rename driver to prepare for split
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v8 0/8] i2c-octeon and i2c-thunderx driver
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxxx>
• Re: [RESEND PATCH v2 00/13] eeprom: support for at24cs and at24mac
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 02/12] eeprom: at24: remove nvmem regmap dependency
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] add missing UARTs pins and I2C entriesfor AllWinner H3 DTSI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drivers: i2c: qup: Fix error handling
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 1/2] drivers: i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 0/2] drivers: i2c: qup: Some misc fixes
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 7/7] iio: inv_mpu6050: Add support for external sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/12] nvmem: mtk-efuse: remove nvmem regmap dependency
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 2/2] i2c, i2c_imc: Add DIMM bus code
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• [PATCH v3 1/2] i2c_imc: New driver for Intel's iMC, found on LGA2011 SNB chips
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• [PATCH v3 0/2] i2c_imc: New driver, at long last
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6] i2c: rk3x: add i2c support for rk3399 soc
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• I2C driver for LTC1760 dual smart battery system manager
  • From: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• Re: [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 05/10] i2c: add support for ACPI reconfigure notifications
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/12] nvmem: mxs-ocotp: remove nvmem regmap dependency
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH] i2c-mux-pca9541: fix setup_timer.cocci warnings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6] i2c: rk3x: add i2c support for rk3399 soc
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c-algo-bit: declare i2c_bit_quirk_no_clk_stretch as static
  • From: Michele Curti <michele.curti@xxxxxxxxx>
• [PATCH] i2c-mux-pca9541: fix setup_timer.cocci warnings
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] i2c: Raise SDA for each received bit, if necessary
  • From: Thomas Zimmermann <tdz@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-tools: add new tool 'i2ctransfer'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-tools: add new tool 'i2ctransfer'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.6
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: uniphier: add "\n" at the end of error log
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: i2c-mv64xxx: misc small improvements
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: octeon: Add workaround for broken irqs on CN3860
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-smbus: Don't report duplicate alerts
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH] i2c: octeon: Add workaround for broken irqs on CN3860
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• Re: [PATCH v7 09/15] i2c: octeon: Add workaround for broken irqs on CN3860
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/12] nvmem: mtk-efuse: remove nvmem regmap dependency
  • From: andrew-ct chen <andrew-ct.chen@xxxxxxxxxxxx>
• Re: [PATCH 05/12] nvmem: vif610-ocotp: remove nvmem regmap dependency
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: use usleep_range(50,100) instead of udelay(50)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] The input clock of I2C should be platform/2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: ls1/ls2: add workaround for erratum ERR010027
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: ls1/ls2: add workaround for erratum ERR010027
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 08/15] i2c: octeon: Improve performance if interrupt is early
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 09/15] i2c: octeon: Add workaround for broken irqs on CN3860
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 08/15] i2c: octeon: Improve performance if interrupt is early
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: octeon: Remove zero-length message support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH] i2c: octeon: Remove zero-length message support
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: use usleep_range(50,100) instead of udelay(50)
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: use usleep_range(50,100) instead of udelay(50)
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: imx: use usleep_range(50,100) instead of udelay(50)
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• RE: [v8, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 07/15] i2c: octeon: Add support for cn78xx chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 06/15] dt-bindings: i2c: Add Octeon cn78xx TWSI
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 10/19] i2c: octeon: Add support for cn78xx chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 04/15] i2c: octeon: Add flush writeq helper function
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 02/15] i2c: octeon: Use i2c recovery framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 01/15] i2c: octeon: Improve error status checking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: device-tree: Handling child nodes which are not i2c devices
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [RFC] i2c: device-tree: Handling child nodes which are not i2c devices
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH v7 01/15] i2c: octeon: Improve error status checking
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 02/15] i2c: octeon: Use i2c recovery framework
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 04/15] i2c: octeon: Add flush writeq helper function
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 03/15] i2c: octeon: Remove I2C_FUNC_SMBUS_QUICK support
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 09/15] i2c: octeon: Add workaround for broken irqs on CN3860
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 07/15] i2c: octeon: Add support for cn78xx chips
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 08/15] i2c: octeon: Improve performance if interrupt is early
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 10/15] i2c: octeon: Move read function before write
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 06/15] dt-bindings: i2c: Add Octeon cn78xx TWSI
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 15/15] i2c: thunderx: Add smbus alert support
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 14/15] i2c: octeon,thunderx: Move register offsets to struct
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 13/15] i2c: thunderx: Add i2c driver for ThunderX SOC
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 11/15] i2c: octeon: Rename driver to prepare for split
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 12/15] i2c: octeon: Split the driver into two parts
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• [PATCH v7 00/15] i2c-octeon and i2c-thunderx drivers
  • From: Jan Glauber <jglauber@xxxxxxxxxx>
• Re: [PATCH v7 1/4] i2c: tegra: disable clock before returning error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v7 2/4] i2c: tegra: calculate timeout for config load when needed
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v7 3/4] i2c: tegra: add separate function for config_load
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v7 4/4] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v7 1/4] i2c: tegra: disable clock before returning error
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• Re: [PATCH v6 1/4] i2c: tegra: disable clock before returning error
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH v6 3/4] i2c: tegra: add separate function for config_load
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v6 4/4] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v6 2/4] i2c: tegra: calculate timeout for config load when needed
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v6 1/4] i2c: tegra: disable clock before returning error
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v5 1/4] i2c: tegra: disable clock before returning error
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v5 2/4] i2c: tegra: calculate timeout for config load when needed
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v5 3/4] i2c: tegra: add separate function for config_load
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v5 4/4] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: tegra: calculate timeout for config load when needed
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix indentation for better readability
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: s3c2410: fix indentation for better readability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: pinctrl: fix indentation for better readability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: st: Implement i2c_bus_recovery_info callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: get fast/std speed scl high/low count from DT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c/omap: drop the lock hard irq context
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: dln2: Pass forward ACPI companion
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 00/12] nvmem: remove regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 01/12] nvmem: core: remove regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 03/12] eeprom: at25: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 05/12] nvmem: vif610-ocotp: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 04/12] nvmem: qfprom: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 06/12] nvmem: sunxi-sid: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 07/12] nvmem: rockchip-efuse: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 08/12] nvmem: mtk-efuse: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 10/12] nvmem: lpc18xx-eeprom: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 09/12] nvmem: imx-ocotp: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 11/12] nvmem: mxs-ocotp: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 12/12] nvmem: 93xx46: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 02/12] eeprom: at24: remove nvmem regmap dependency
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/3] i2c: tegra: add separate function for config_load
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v4 3/3] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v4 1/3] i2c: tegra: calculate timeout for config load when needed
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
• [PATCH] i2c: designware: do not disable adapter after transfer
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH] i2c: mux: pinctrl: fix indentation for better readability
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] i2c: mux: pinctrl: fix indentation for better readability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/4] i2c: i2c-mv64xxx: remove CONFIG_HAVE_CLK conditionals
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] i2c: i2c-mv64xxx: handle probe deferral for the clock
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] i2c: i2c-mv64xxx: use clk_{prepare_enable,disable_unprepare}
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] i2c: i2c-mv64xxx: misc small improvements
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] i2c: i2c-mv64xxx: enable the driver on ARCH_MVEBU
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix build break due to incompatible pointer types
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v8, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v8 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• [PATCH v4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [v8, 4/7] dt: move guts devicetree doc out of powerpc directory
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 0/7] Fix eSDHC host version register bug
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 1/7] Documentation: DT: update Freescale DCFG compatible
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 2/7] ARM64: dts: ls2080a: add device configuration node
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 3/7] soc: fsl: add GUTS driver for QorIQ platforms
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 6/7] MAINTAINERS: add entry for Freescale SoC specific driver
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• [v8, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
  • From: Yangbo Lu <yangbo.lu@xxxxxxx>
• Re: [PATCH v6] i2c: rk3x: add i2c support for rk3399 soc
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v2 05/10] i2c: add support for ACPI reconfigure notifications
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v6 07/19] i2c: octeon: Use i2c recovery framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 05/10] i2c: add support for ACPI reconfigure notifications
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/19] i2c: octeon: Use i2c recovery framework
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 08/19] i2c: octeon: Enable High-Level Controller
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 08/19] i2c: octeon: Enable High-Level Controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 07/19] i2c: octeon: Use i2c recovery framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 08/19] i2c: octeon: Enable High-Level Controller
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/19] i2c: octeon: Use i2c recovery framework
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• Re: [PATCH v3] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• [PATCH v3] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• [PATCH v2] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: designware-platdrv: Fix runtime PM initialization
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: designware-platdrv: Fix runtime PM initialization
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] i2c: uniphier: add "\n" at the end of error log
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: designware-platdrv: Fix runtime PM initialization
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Antti Palosaari <crope@xxxxxx>
• Re: [PATCH v6 10/19] i2c: octeon: Add support for cn78xx chips
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 08/19] i2c: octeon: Enable High-Level Controller
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 10/19] i2c: octeon: Add support for cn78xx chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 08/19] i2c: octeon: Enable High-Level Controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 07/19] i2c: octeon: Use i2c recovery framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 09/24] [media] m88ds3103: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 11/24] [media] rtl2832: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 04/24] i2c: i2c-arb-gpio-challenge: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 12/24] [media] si2168: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 06/24] i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 19/24] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 20/24] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 21/24] [media] si2168: change the i2c gate to be mux-locked
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 23/24] [media] rtl2832_sdr: get rid of empty regmap wrappers
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 24/24] [media] rtl2832: regmap is aware of lockdep, drop local locking hack
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 17/24] i2c: muxes always lock the parent adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 15/24] i2c-mux: drop old unused i2c-mux api
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 14/24] of/unittest: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 13/24] [media] cx231xx: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 02/24] i2c: i2c-mux-gpio: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 10/24] [media] rtl2830: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 03/24] i2c: i2c-mux-pinctrl: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 05/24] i2c: i2c-mux-pca9541: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 07/24] i2c: i2c-mux-reg: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 00/24] i2c mux cleanup and locking update
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 01/24] i2c-mux: add common data for every i2c-mux instance
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 00/13] eeprom: support for at24cs and at24mac
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: designware-platdrv: Fix runtime PM initialization
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: designware-pcidrv: enable RuntimePM before registering to the core
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC PATCH v2 00/10] ACPI overlays
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 01/10] kernel: add TAINT_OVERLAY_ACPI_TABLE
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 02/10] acpi: decouple initrd table install from CONFIG_ACPI_INITRD_TABLE_OVERRIDE
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 03/10] acpi: fix enumeration (visited) flags for bus rescans
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 04/10] acpi: add support for ACPI reconfiguration notifiers
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 05/10] i2c: add support for ACPI reconfigure notifications
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 06/10] spi: add support for ACPI reconfigure notifications
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 08/10] acpi: add support for configfs
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 07/10] efi: load SSTDs from EFI variables
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 10/10] HACK: acpi: configfs: add unload_hanlde_path attribute for tables
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [RFC PATCH v2 09/10] acpi: add support for loading SSDTs via configfs
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] add missing UARTs pins and I2C entriesfor AllWinner H3 DTSI
  • From: Martin Ayotte <martinayotte@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: Code Kipper <codekipper@xxxxxxxxx>
• Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: martinayotte@xxxxxxxxx
• Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: martinayotte@xxxxxxxxx
• Re: [PATCH v6 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
  • From: Peter Rosin <peda@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: martinayotte@xxxxxxxxx
• Re: [PATCH v6 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
  • From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
• Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v6] i2c: rk3x: add i2c support for rk3399 soc
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 1/2] i2c: tegra: add separate function for config_load
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: tegra: proper handling of error cases
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: tegra: add separate function for config_load
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• [PATCH v3 1/2] i2c: tegra: add separate function for config_load
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: dln2: Pass forward ACPI companion
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: proper handling of error cases
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v6 20/24] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH] i2c: tegra: proper handling of error cases
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i2c: tegra: proper handling of error cases
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v2] i2c: tegra: proper handling of error cases
  • From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
• RE: [Patch v1] i2c: imx7ulp: add i.MX7ULP i2c controller bus driver
  • From: Pan Gao <pandy.gao@xxxxxxx>
• Re: [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: dln2: Pass forward ACPI companion
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [Patch v1] i2c: imx7ulp: add i.MX7ULP i2c controller bus driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 00/13] eeprom: support for at24cs and at24mac
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 05/13] eeprom: at24: replace msleep() with usleep_range()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 04/13] eeprom: at24: make locking more fine-grained
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v2 01/13] eeprom: at24: remove a reduntant if
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• RE: [PATCH] i2c: tegra: proper handling of error cases
  • From: Shardar Mohammed <smohammed@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mediatek: i2c multi transfer optimization
  • From: liguo zhang <liguo.zhang@xxxxxxxxxxxx>
• Re: [PATCH v6 01/24] i2c-mux: add common data for every i2c-mux instance
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: Martin Ayotte <martinayotte@xxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS
  • From: "Martin Ayotte" <martinayotte@xxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [RFC] i2c: device-tree: Handling child nodes which are not i2c devices
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Add missing of_node_put()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Add missing of_node_put()
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: proper handling of error cases
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH] i2c: core: Add missing of_node_put()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v6 01/24] i2c-mux: add common data for every i2c-mux instance
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• i2c device hangs the whole bus, recovery ?
  • From: Daniel Walker <danielwa@xxxxxxxxx>
• i2c-tools userspace tools
  • From: Svein Seldal <sveinse@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: efm32: Prevent potential division by zero
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] i2c: rk3x: switch to i2c generic dt parsing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Martinez Kristofer <kristofer.s.martinez@xxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: versatile: Convert to use resource managed devm_* APIs
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 1/2] i2c: versatile: Allow compile test build
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 1/2] i2c: versatile: Allow compilte test build
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH] i2c-i801: use MEM resource instead of IO resource
  • From: Thilo Cestonaro <thilo@xxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: efm32: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH] i2c: designware-platdrv: implement bus recovery
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/4] i2c: designware-platdrv: fix unbalanced clk enable and prepare
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 0/4] i2c: designware: runtime pm fix and improve
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 4/4] i2c: designware: remove runtime suspend prevention during registration
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 1/4] i2c: designware-platdrv: Fix runtime PM initialization
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 3/4] i2c: designware-pcidrv: enable RuntimePM before registering to the core
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: efm32: Prevent potential division by zero
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: efm32: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH] i2c: efm32: Prevent potential division by zero
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6 06/19] i2c: octeon: Improve error status checking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 05/19] i2c: octeon: Remove superfluous check in octeon_i2c_test_iflg
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 03/19] i2c: octeon: Rename [read|write]_sw to reg_[read|write]
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] i2c: octeon: Introduce helper functions for register access
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: efm32: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH] i2c: efm32: Prevent potential division by zero
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6 06/19] i2c: octeon: Improve error status checking
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] i2c: octeon: Introduce helper functions for register access
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/19] i2c: octeon: Rename [read|write]_sw to reg_[read|write]
  • From: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: efm32: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: rockchip: add i2c nodes RK3228 SoCs
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 01/24] i2c-mux: add common data for every i2c-mux instance
  • From: Peter Rosin <peda@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: get fast/std speed scl high/low count from DT
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: get fast/std speed scl high/low count from DT
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware-platdrv: get fast/std speed scl high/low count from DT
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v6 06/19] i2c: octeon: Improve error status checking
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] i2c: octeon: Introduce helper functions for register access
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 03/19] i2c: octeon: Rename [read|write]_sw to reg_[read|write]
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 02/19] i2c: octeon: Move set-clock and init-lowlevel upward
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 01/19] i2c: octeon: Increase retry default and use fixed timeout value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH RFC] I2C: i2c-smbus: add device tree support
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH] i2c: simtec: Convert to use devm_* APIs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFT][PATCH 2/2] i2c: sun6i-p2wi: Prevent potential division by zero
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: use MEM resource instead of IO resource
  • From: Jean Delvare <jdelvare@xxxxxxxx>
• [PATCH] i2c: cpm: Fix build break due to incompatible pointer types
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: rockchip: add i2c nodes RK3228 SoCs
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: rockchip: add i2c nodes RK3228 SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: rockchip: add i2c nodes RK3228 SoCs
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [RFT][PATCH 2/2] i2c: sun6i-p2wi: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [RFT][PATCH 1/2] i2c: sirf: Prevent potential division by zero
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH] i2c: simtec: Convert to use devm_* APIs
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: tvp5150 regression after commit 9f924169c035
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: enable multi master mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: simtec: Convert to use devm_* APIs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Allow build Baytrail semaphore support when IOSF_MBI=m
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: ismt: Add Intel DNV PCI ID
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: i2c: xlp9xx: add support for Broadcom Vulcan
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: rockchip: add i2c nodes RK3228 SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rk3x: add support for rk3228
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Allow build Baytrail semaphore support when IOSF_MBI=m
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>