Linux GPIO
[Prev Page][Next Page]
- Re: [RFC][PATCH 3/5] irqchip: Allow QCOM_PDC to be loadable as a perment module, (continued)
- [PATCH] pinctrl: amd: fix npins for uart0 in kerncz_groups,
Jacky Hu
- [libgpiod] reading multiple lines after edge event,
Gerrit Wyen
- [PATCH v3 0/3] pinctrl: intel: Reuse for_each_requested_gpio*() macros,
Andy Shevchenko
- [PATCH v1 0/5] gpio, pinctrl, introduce for_each_requested_gpio() helper,
Andy Shevchenko
- [PATCH v3 00/10] Adding support for Microchip Sparx5 SoC,
Lars Povlsen
- [PATCH v3 10/10] arm64: dts: sparx5: Add i2c devices, i2c muxes, Lars Povlsen
- [PATCH v3 09/10] arm64: dts: sparx5: Add Sparx5 SoC DPLL clock, Lars Povlsen
- [PATCH v3 07/10] dt-bindings: clock: sparx5: Add bindings include file, Lars Povlsen
- [PATCH v3 05/10] pinctrl: ocelot: Add Sparx5 SoC support, Lars Povlsen
- [PATCH v3 03/10] arm64: dts: sparx5: Add basic cpu support, Lars Povlsen
- [PATCH v3 04/10] arm64: dts: sparx5: Add pinctrl support, Lars Povlsen
- Re: [PATCH v3 00/10] Adding support for Microchip Sparx5 SoC, Arnd Bergmann
[PATCH v3 0/2] gpio: Add support for the PCAL9535,
Jan Kiszka
[PATCH 0/2] pinctrl: stm32: Add possibility to configure only one pin,
Alexandre Torgue
[PATCH 0/2] pinctrl: stm32: add changes to better manage,
Alexandre Torgue
[PATCH v8 0/4] Introduce the for_each_set_clump macro,
Syed Nayyar Waris
[PATCH] pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API,
Alexandre Torgue
[PATCH] pinctrl: qcom: sc7180: Make gpio28 non wakeup capable,
Rajendra Nayak
[PATCH v2 0/2] gpio: Add support for the PCAL9535,
Jan Kiszka
[PATCH v1] doc: devicetree: bindings: fix spelling mistake,
Flavio Suligoi
[PATCH 08/29] gpio: driver.h: fix kernel-doc markup,
Mauro Carvalho Chehab
[PATCH 12/29] dt: update a reference for reneases pcar file renamed to yaml,
Mauro Carvalho Chehab
[PATCH] gpio: pca953x: Add support for the PCAL9535,
Jan Kiszka
[PATCH v2 01/13] pinctrl: intel: Disable input and output buffer when switching to GPIO,
Andy Shevchenko
- [PATCH v2 04/13] pinctrl: intel: Get rid of redundant 'else' in intel_config_set_debounce(), Andy Shevchenko
- [PATCH v2 03/13] pinctrl: intel: Make use of IRQ_RETVAL(), Andy Shevchenko
- [PATCH v2 02/13] pinctrl: intel: Reduce scope of the lock, Andy Shevchenko
- [PATCH v2 11/13] pinctrl: lynxpoint: Introduce helpers to enable or disable input, Andy Shevchenko
- [PATCH v2 09/13] pinctrl: intel: Make use of for_each_requested_gpio(), Andy Shevchenko
- [PATCH v2 10/13] pinctrl: lynxpoint: Make use of for_each_requested_gpio(), Andy Shevchenko
- [PATCH v2 07/13] pinctrl: intel: Protect IO in few call backs by lock, Andy Shevchenko
- [PATCH v2 08/13] pinctrl: intel: Introduce for_each_requested_gpio() macro, Andy Shevchenko
- [PATCH v2 05/13] pinctrl: intel: Drop the only label in the code for consistency, Andy Shevchenko
- [PATCH v2 06/13] pinctrl: intel: Split intel_config_get() to three functions, Andy Shevchenko
- [PATCH v2 13/13] pinctrl: baytrail: Drop no-op ACPI_PTR() call, Andy Shevchenko
- [PATCH v2 12/13] pinctrl: lynxpoint: Drop no-op ACPI_PTR() call, Andy Shevchenko
- Re: [PATCH v2 01/13] pinctrl: intel: Disable input and output buffer when switching to GPIO, Mika Westerberg
[PATCH v10 0/4] MAX9286 GMSL Support (+RDACM20),
Kieran Bingham
[PATCH] pinctrl: ingenic: Add ingenic,jz4725b-gpio compatible string,
Paul Cercueil
[PATCH] pinctrl: single: fix function name in documentation,
Drew Fustini
[PATCH] drivers\gpio: use kobj_to_dev,
Wang Qing
[gpio:devel] BUILD SUCCESS f6d984418ffde19322fd149105200224ac2bc089, kernel test robot
[pinctrl:for-next] BUILD SUCCESS 02e1254d7740d1df8cc5e760a442d3c835f73066, kernel test robot
[PATCH 0/2] gpiolib: cdev: fixes for split from gpiolib.c,
Kent Gibson
[gpio:gpio-charger-mentioned] BUILD SUCCESS f9e5824140b913437cc820c3f8bb33353ee4961d, kernel test robot
[gpio:fixes] BUILD SUCCESS cdf59728a3cdfdf59f517329d40eb2257b3fe7d0, kernel test robot
[pinctrl:devel] BUILD SUCCESS c6a30c7904a4a7e78661f82d2ead1a3f9973b708, kernel test robot
[gpio:gpio-charger-mentioned 54/55] drivers/gpio/gpiolib-cdev.c:1127:5: warning: no previous prototype for function 'gpiolib_cdev_register', kernel test robot
[gpio:gpio-charger-mentioned 54/55] drivers/gpio/gpiolib-cdev.c:1127:5: warning: no previous prototype for 'gpiolib_cdev_register', kernel test robot
linusw/for-next baseline: 62 runs, 1 regressions (gpio-v5.7-3-2-gcdf59728a3cd), kernelci.org bot
linusw/for-next build: 4 builds: 0 failed, 4 passed, 24 warnings (gpio-v5.7-3-2-gcdf59728a3cd), kernelci.org bot
linusw/fixes baseline: 64 runs, 3 regressions (gpio-v5.7-3-2-gcdf59728a3cd), kernelci.org bot
linusw/devel baseline: 63 runs, 1 regressions (gpio-v5.8-1-1-gf6d984418ffd), kernelci.org bot
[PATCH v2] gpio: xilinx: Add interrupt support,
Robert Hancock
linusw/fixes build: 6 builds: 0 failed, 6 passed, 24 warnings (gpio-v5.7-3-2-gcdf59728a3cd), kernelci.org bot
linusw/devel build: 6 builds: 0 failed, 6 passed, 24 warnings (gpio-v5.8-1-1-gf6d984418ffd), kernelci.org bot
[PATCH V5 0/9] Support i.MX8 SoCs pinctrl drivers built as module,
Anson Huang
[PATCH] doc: devicetree: bindings: fix spelling mistake,
Flavio Suligoi
[PATCH v3] pinctrl: samsung: Use bank name as irqchip name,
Marek Szyprowski
[PATCH v1 01/10] pinctrl: intel: Disable input and output buffer when switching to GPIO,
Andy Shevchenko
- [PATCH v1 02/10] pinctrl: intel: Reduce scope of the lock, Andy Shevchenko
- [PATCH v1 05/10] pinctrl: intel: Get rid of redundant 'else' in intel_config_set_debounce(), Andy Shevchenko
- [PATCH v1 03/10] pinctrl: intel: Make use of IRQ_RETVAL(), Andy Shevchenko
- [PATCH v1 04/10] pinctrl: intel: Split intel_config_get() to three functions, Andy Shevchenko
- [PATCH v1 08/10] pinctrl: intel: Introduce for_each_requested_gpio() macro, Andy Shevchenko
- [PATCH v1 09/10] pinctrl: intel: Make use of for_each_requested_gpio(), Andy Shevchenko
- [PATCH v1 07/10] pinctrl: intel: Protect IO in few call backs by lock, Andy Shevchenko
- [PATCH v1 06/10] pinctrl: intel: Drop the only label in the code for consistency, Andy Shevchenko
- [PATCH v1 10/10] pinctrl: lynxpoint: Make use of for_each_requested_gpio(), Andy Shevchenko
- Re: [PATCH v1 01/10] pinctrl: intel: Disable input and output buffer when switching to GPIO, Andy Shevchenko
[PATCH v2] pinctrl: samsung: Use bank name as irqchip name,
Marek Szyprowski
Re: [PATCH] max732x_probe: remove redundant check,
Linus Walleij
[PATCH] gpio: Add gpio-charger to the documentation,
Linus Walleij
[PATCH V4 0/9] Support i.MX8 SoCs pinctrl drivers built as module,
Anson Huang
- [PATCH V4 3/9] pinctrl: imx8mm: Support building as module, Anson Huang
- [PATCH V4 7/9] pinctrl: imx8qxp: Support building as module, Anson Huang
- [PATCH V4 6/9] pinctrl: imx8mp: Support building as module, Anson Huang
- [PATCH V4 9/9] pinctrl: imx8dxl: Support building as module, Anson Huang
- [PATCH V4 8/9] pinctrl: imx8qm: Support building as module, Anson Huang
- [PATCH V4 4/9] pinctrl: imx8mn: Support building as module, Anson Huang
- [PATCH V4 2/9] pinctrl: imx: Support building i.MX pinctrl driver as module, Anson Huang
- [PATCH V4 1/9] pinctrl: imx: Support building SCU pinctrl driver as module, Anson Huang
- [PATCH V4 5/9] pinctrl: imx8mq: Support building as module, Anson Huang
- Re: [PATCH V4 0/9] Support i.MX8 SoCs pinctrl drivers built as module, Daniel Baluta
[PATCH] pinctrl: meson: fix drive strength register and bit calculation,
hhk7734
GPIO regression on mvebu and/or max310x since 2ab73c6d8323,
Jan Kundrát
[PATCH v3] gpiolib: split character device into gpiolib-cdev,
Kent Gibson
[PATCH v1 1/6] pinctrl: cherryview: Introduce chv_readl() helper,
Andy Shevchenko
Generic way for verifying GPIO wakeup capability,
Pintu Agarwal
[PATCH] dt-bindings: mfd: max77620: Convert to json-schema,
Thierry Reding
[PATCH V3 0/9] Support i.MX8 SoCs pinctrl drivers built as module,
Anson Huang
- [PATCH V3 9/9] pinctrl: imx8dxl: Support building as module, Anson Huang
- [PATCH V3 4/9] pinctrl: imx8mn: Support building as module, Anson Huang
- [PATCH V3 5/9] pinctrl: imx8mq: Support building as module, Anson Huang
- [PATCH V3 7/9] pinctrl: imx8qxp: Support building as module, Anson Huang
- [PATCH V3 6/9] pinctrl: imx8mp: Support building as module, Anson Huang
- [PATCH V3 8/9] pinctrl: imx8qm: Support building as module, Anson Huang
- [PATCH V3 3/9] pinctrl: imx8mm: Support building as module, Anson Huang
- [PATCH V3 1/9] pinctrl: imx: Support building SCU pinctrl driver as module, Anson Huang
- [PATCH V3 2/9] pinctrl: imx: Support building i.MX pinctrl driver as module, Anson Huang
- RE: [PATCH V3 0/9] Support i.MX8 SoCs pinctrl drivers built as module, Aisheng Dong
[PATCH 00/17] spelling.txt: /decriptors/descriptors/,
Kieran Bingham
[PATCH] gpio: mpc8xxx: change the gpio interrupt flags.,
Hui Song
[PATCH] pinctrl: samsung: Use bank name as irqchip name,
Marek Szyprowski
[PATCH v2] Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'",
haibo . chen
[PATCH AUTOSEL 5.6 152/606] pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip, Sasha Levin
[PATCH AUTOSEL 5.6 257/606] gpio: tegra: mask GPIO IRQs during IRQ shutdown, Sasha Levin
[PATCH AUTOSEL 5.6 293/606] gpio: mvebu: Fix probing for chips without PWM,
Sasha Levin
[PATCH AUTOSEL 5.6 301/606] gpio: exar: Fix bad handling for ida_simple_get error path, Sasha Levin
[PATCH AUTOSEL 5.6 315/606] gpio: pxa: Fix return value of pxa_gpio_probe(), Sasha Levin
[PATCH AUTOSEL 5.6 316/606] gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe(), Sasha Levin
[PATCH V2 0/9] Support i.MX8 SoCs pinctrl drivers built as module,
Anson Huang
[PATCH v1 0/6] mfd: Make use of software nodes,
Andy Shevchenko
[PATCH v2] pinctrl-single: fix pcs_parse_pinconf() return value,
Drew Fustini
[PATCH v2 00/10] Adding support for Microchip Sparx5 SoC,
Lars Povlsen
- [PATCH v2 01/10] dt-bindings: arm: sparx5: Add documentation for Microchip Sparx5 SoC, Lars Povlsen
- [PATCH v2 02/10] arm64: sparx5: Add support for Microchip 2xA53 SoC, Lars Povlsen
- [PATCH v2 03/10] arm64: dts: sparx5: Add basic cpu support, Lars Povlsen
- [PATCH v2 04/10] arm64: dts: sparx5: Add pinctrl support, Lars Povlsen
- [PATCH v2 05/10] pinctrl: ocelot: Add Sparx5 SoC support, Lars Povlsen
- [PATCH v2 06/10] dt-bindings: clock: sparx5: Add Sparx5 SoC DPLL clock, Lars Povlsen
- [PATCH v2 08/10] clk: sparx5: Add Sparx5 SoC DPLL clock driver, Lars Povlsen
- [PATCH v2 09/10] arm64: dts: sparx5: Add Sparx5 SoC DPLL clock, Lars Povlsen
- [PATCH v2 10/10] arm64: dts: sparx5: Add i2c devices, i2c muxes, Lars Povlsen
- [PATCH v2 07/10] dt-bindings: clock: sparx5: Add bindings include file, Lars Povlsen
Re: gpiolib: Add some warn print for easier to debug, Linus Walleij
[PATCH] pinctrl: qcom: ipq6018 Add missing pins in qpic pin group,
Sivaprakash Murugesan
[PATCH] Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'",
haibo . chen
[libgpiod][PATCH 0/3] Add Android build support,
Gary Bisson
[PATCH] pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings,
kernel test robot
[GIT PULL] Pin control bulk changes for the v5.8 cycle,
Linus Walleij
[PATCH] pinctrl: ingenic: Add NAND FRE/FWE pins for JZ4740,
Paul Cercueil
[RESEND PATCH v4 2/3] usb: serial: xr_serial: Add gpiochip support,
Manivannan Sadhasivam
[PATCH v4 2/3] usb: serial: xr_serial: Add gpiochip support, Manivannan Sadhasivam
[PATCH v2] pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH),
Hans de Goede
[PATCH] gpio: xilinx: Add interrupt support,
Robert Hancock
[PATCH] pinctrl: sh-pfc: r8a77980: add RPC pins, groups, and functions,
Sergei Shtylyov
[libgpiod] general libgpiod inquiry,
R C
you may see my message to your spam because of low connection, URGENT REPLY
[PATCH v1 1/4] gpio: pca953x: Synchronize interrupt handler properly,
Andy Shevchenko
[PATCH 0/8] Support i.MX8 SoCs pinctrl drivers built as module,
Anson Huang
[PATCH] gpio: arizona: put pm_runtime in case of failure,
Navid Emamdoost
[PATCH] gpio: arizona: handle pm_runtime_get_sync failure case,
Navid Emamdoost
[PATCH] gpio: rcar: handle pm_runtime_get_sync failure case,
Navid Emamdoost
[GIT PULL] Bulk GPIO changes for v5.8,
Linus Walleij
[PATCH v4 00/11] Add support for Kontron sl28cpld,
Michael Walle
- [PATCH v4 03/11] irqchip: add sl28cpld interrupt controller support, Michael Walle
- [PATCH v4 09/11] arm64: dts: freescale: sl28: map GPIOs to input events, Michael Walle
- [PATCH v4 10/11] arm64: dts: freescale: sl28: enable LED support, Michael Walle
- [PATCH v4 08/11] arm64: dts: freescale: sl28: enable sl28cpld, Michael Walle
- [PATCH v4 11/11] arm64: dts: freescale: sl28: enable fan support, Michael Walle
- [PATCH v4 06/11] gpio: add support for the sl28cpld GPIO controller, Michael Walle
- [PATCH v4 07/11] hwmon: add support for the sl28cpld hardware monitoring controller, Michael Walle
- [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller, Michael Walle
- [PATCH v4 05/11] pwm: add support for sl28cpld PWM controller, Michael Walle
- [PATCH v4 04/11] watchdog: add support for sl28cpld watchdog, Michael Walle
- [PATCH v4 01/11] dt-bindings: mfd: Add bindings for sl28cpld, Michael Walle
- Re: [PATCH v4 00/11] Add support for Kontron sl28cpld, Lee Jones
[PATCH] pinctrl: tegra: Use noirq suspend/resume callbacks,
Vidya Sagar
[pinctrl:devel] BUILD SUCCESS 94873f6b46f8c103759c28adc121a58022972d01, kernel test robot
[PATCH v1] pintctrl: merrifield: Add I²S bus 2 pins to groups and functions,
Andy Shevchenko
linusw/devel boot: 47 boots: 0 failed, 46 passed with 1 untried/unknown (v5.7-rc7-82-g74910e15ab25), kernelci.org bot
linusw/for-next boot: 24 boots: 0 failed, 24 passed (v5.7-rc7-82-g74910e15ab25), kernelci.org bot
linusw/devel build: 6 builds: 0 failed, 6 passed, 24 warnings (v5.7-rc7-82-g74910e15ab25), kernelci.org bot
linusw/for-next build: 4 builds: 0 failed, 4 passed, 24 warnings (v5.7-rc7-82-g74910e15ab25), kernelci.org bot
[PATCH] pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage,
Dmitry Baryshkov
[PATCH V2] pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe(),
yu kuai
[PATCH] pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()',
Christophe JAILLET
Re: [PATCH] pinctrl: sirf: Add missing put_device() call in sirfsoc_gpio_probe(),
Markus Elfring
[PATCH v2] gpiolib: split character device into gpiolib-cdev,
Kent Gibson
[PATCH] ARM: dts: AM33xx-l4: add gpio-ranges,
Drew Fustini
[PATCH] pinctrl: sirf: add missing put_device() in error handling path in sirfsoc_gpio_probe(), yu kuai
[PATCH] pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH),
Hans de Goede
[libgpiod] Polling precision/order,
Ryan Lovelett
[PATCH] gpio:asm28xx-18xx: new driver,
Richard Hsu
[gpio:fixes] BUILD SUCCESS e9bdf7e655b9ee81ee912fae1d59df48ce7311b6, kbuild test robot
[gpio:devel] BUILD SUCCESS a8173820f441ab3e2a45c4bb66b70da9a57a349e, kbuild test robot
[gpio:fix-opendrain-irq] BUILD SUCCESS 17df3089eccf2d9ef92448a92a64cda6668d038b, kbuild test robot
[gpio:for-next] BUILD SUCCESS 5e9fc19f525b67967cc10d3ca8e85214fc3c26bd, kbuild test robot
[PATCH] pinctrl-single: fix pcs_parse_pinconf() return val,
Drew Fustini
[PATCH] pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken,
Christophe JAILLET
[PATCH v3 0/4] pinctrl: bcm2835: Add support for wake-up interrupts,
Florian Fainelli
[PATCH] pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()',
Christophe JAILLET
[PATCH] pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()',
Christophe JAILLET
[GIT PULL] GPIO fixes for v5.7,
Linus Walleij
[PATCH v2 0/4] pinctrl: bcm2835: Support for wake-up interrupts,
Florian Fainelli
Re: pinctrl-single: num_maps in generic pinconf support?,
Drew Fustini
linusw/fixes boot: 56 boots: 1 failed, 55 passed (v5.7-rc6-9-ge9bdf7e655b9), kernelci.org bot
linusw/fixes build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc6-9-ge9bdf7e655b9), kernelci.org bot
linusw/for-next boot: 46 boots: 0 failed, 46 passed (v5.7-rc7-88-g5e9fc19f525b), kernelci.org bot
linusw/for-next build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc7-88-g5e9fc19f525b), kernelci.org bot
[PATCH v4 1/2] gpio: pca953x: Drop unneeded ACPI_PTR(),
Andy Shevchenko
linusw/fixes boot: 53 boots: 1 failed, 52 passed (v5.7-rc6-9-g44ca08d53c6b), kernelci.org bot
linusw/fixes build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc6-9-g44ca08d53c6b), kernelci.org bot
linusw/for-next boot: 55 boots: 1 failed, 54 passed (v5.7-rc7-88-gc193ca5188d4), kernelci.org bot
linusw/for-next build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc7-88-gc193ca5188d4), kernelci.org bot
linusw/devel boot: 52 boots: 1 failed, 50 passed with 1 untried/unknown (v5.7-rc7-78-ga8173820f441), kernelci.org bot
linusw/devel build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc7-78-ga8173820f441), kernelci.org bot
[PATCH 0/4] pinctrl: bcm2835: Support for wake-up interrupts,
Florian Fainelli
linusw/for-next boot: 53 boots: 1 failed, 51 passed with 1 untried/unknown (v5.7-rc6-84-ge47b16ebc068), kernelci.org bot
linusw/devel boot: 55 boots: 2 failed, 53 passed (v5.7-rc1-75-gf8af9113b1cf), kernelci.org bot
linusw/for-next build: 5 builds: 0 failed, 5 passed, 24 warnings (v5.7-rc6-84-ge47b16ebc068), kernelci.org bot
linusw/devel build: 5 builds: 0 failed, 5 passed, 44 warnings (v5.7-rc1-75-gf8af9113b1cf), kernelci.org bot
linusw/fixes boot: 58 boots: 1 failed, 57 passed (v5.7-rc6-8-gad3073bcb903), kernelci.org bot
[PATCH v6 0/3] gpio: generic regmap implementation,
Michael Walle
[Index of Archives]
[Linux SPI]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]
