Re: [PATCH] dt-bindings: pinctrl: rza1: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On Mon, Aug 24, 2020 at 11:09 AM Jacopo Mondi <jacopo@xxxxxxxxxx> wrote:
> On Fri, Aug 21, 2020 at 01:19:56PM +0200, Geert Uytterhoeven wrote:
> > Convert the Renesas RZ/A1 combined Pin and GPIO controller Device Tree
> > binding documentation to json-schema.
> >
> > Rename "rza1-pinctrl" to "rza1-ports", to match the compatible value
> > scheme.
> > Use "pinctrl" generic node name.
> > Drop generic and consumer examples, as they do not belong here.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml

> > +    properties:
> > +      gpio-controller: true
> > +
> > +      '#gpio-cells':
> > +        const: 2
> > +
> > +      gpio-ranges:
> > +        maxItems: 1
> > +
> > +    required:
> > +      - gpio-controller
>
> Doesn't 'true' imply required ?

No, true means that a property for which the schema is declared
elsewhere is applicable here.

> > +      - '#gpio-cells'
> > +      - gpio-ranges
> > +
> > +
> > +additionalProperties:
> > +  anyOf:
>
> Confused by this part. This describes a GPIO consumer, doesn't it ?
> Does this part belong here ?

It describes the ping multiplexing sub-node, as a child (first item of
anOf), or grandchild (second item of anyOf).

> > +    - type: object
> > +      allOf:
> > +        - $ref: pincfg-node.yaml#
> > +        - $ref: pinmux-node.yaml#
> > +
> > +      description:
> > +        A pin multiplexing sub-node describes how to configure a set of (or a
> > +        single) pin in some desired alternate function mode.
> > +        A single sub-node may define several pin configurations.
> > +        A few alternate function require special pin configuration flags to be
> > +        supplied along with the alternate function configuration number.
> > +        The hardware reference manual specifies when a pin function requires
> > +        "software IO driven" mode to be specified. To do so use the generic
> > +        properties from the <include/linux/pinctrl/pinconf_generic.h> header
> > +        file to instruct the pin controller to perform the desired pin
> > +        configuration operation.
> > +        The hardware reference manual specifies when a pin has to be configured
> > +        to work in bi-directional mode and when the IO direction has to be
> > +        specified by software. Bi-directional pins must be managed by the pin
> > +        controller driver internally, while software driven IO direction has to
> > +        be explicitly selected when multiple options are available.
> > +
> > +      properties:
> > +        pinmux:
> > +          description: |
> > +            Integer array representing pin number and pin multiplexing
> > +            configuration.
> > +            When a pin has to be configured in alternate function mode, use
> > +            this property to identify the pin by its global index, and provide
> > +            its alternate function configuration number along with it.
> > +            When multiple pins are required to be configured as part of the
> > +            same alternate function they shall be specified as members of the
> > +            same argument list of a single "pinmux" property.
> > +            Helper macros to ease assembling the pin index from its position
> > +            (port where it sits on and pin number) and alternate function
> > +            identifier are provided by the pin controller header file at:
> > +            <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
> > +            Integers values in "pinmux" argument list are assembled as:
> > +            ((PORT * 16 + PIN) | MUX_FUNC << 16)
> > +
> > +        phandle: true
> > +        input-enable: true
> > +        output-enable: true
> > +
> > +      required:
> > +        - pinmux
> > +
> > +      additionalProperties: false
> > +
> > +    - type: object
> > +      properties:
> > +        phandle: true
> > +
> > +      additionalProperties:
> > +        $ref: "#/additionalProperties/anyOf/0"

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux