Add support for requesting lines using the GPIO_V2_GET_LINE_IOCTL, and returning their current values using GPIO_V2_LINE_GET_VALUES_IOCTL. Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx> --- The struct line implementation is based on the v1 struct linehandle implementation. The line_ioctl() is a simple wrapper around line_get_values() here, but will be extended with other ioctls in subsequent patches. drivers/gpio/gpiolib-cdev.c | 413 ++++++++++++++++++++++++++++++++++++ 1 file changed, 413 insertions(+) diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index e6c9b78adfc2..4b657492d836 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/anon_inodes.h> +#include <linux/atomic.h> #include <linux/bitmap.h> +#include <linux/build_bug.h> #include <linux/cdev.h> #include <linux/compat.h> #include <linux/device.h> @@ -34,6 +36,7 @@ * GPIO line handle management */ +#ifdef CONFIG_GPIO_CDEV_V1 /** * struct linehandle_state - contains the state of a userspace handle * @gdev: the GPIO device the handle pertains to @@ -376,6 +379,390 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) linehandle_free(lh); return ret; } +#endif /* CONFIG_GPIO_CDEV_V1 */ + +/** + * struct line - contains the state of a userspace line request + * @gdev: the GPIO device the line request pertains to + * @label: consumer label used to tag descriptors + * @num_descs: the number of descriptors held in the descs array + * @descs: the GPIO descriptors held by this line request, with @num_descs + * elements. + */ +struct line { + struct gpio_device *gdev; + const char *label; + u32 num_descs; + struct gpio_desc *descs[]; +}; + +#define GPIO_V2_LINE_BIAS_FLAGS \ + (GPIO_V2_LINE_FLAG_BIAS_PULL_UP | \ + GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN | \ + GPIO_V2_LINE_FLAG_BIAS_DISABLED) + +#define GPIO_V2_LINE_DIRECTION_FLAGS \ + (GPIO_V2_LINE_FLAG_INPUT | \ + GPIO_V2_LINE_FLAG_OUTPUT) + +#define GPIO_V2_LINE_DRIVE_FLAGS \ + (GPIO_V2_LINE_FLAG_OPEN_DRAIN | \ + GPIO_V2_LINE_FLAG_OPEN_SOURCE) + +#define GPIO_V2_LINE_VALID_FLAGS \ + (GPIO_V2_LINE_FLAG_ACTIVE_LOW | \ + GPIO_V2_LINE_DIRECTION_FLAGS | \ + GPIO_V2_LINE_DRIVE_FLAGS | \ + GPIO_V2_LINE_BIAS_FLAGS) + +static u64 gpio_v2_line_config_flags(struct gpio_v2_line_config *lc, + int line_idx) +{ + int i; + u64 mask = BIT_ULL(line_idx); + + for (i = 0; i < lc->num_attrs; i++) { + if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_FLAGS) && + (lc->attrs[i].mask & mask)) + return lc->attrs[i].attr.flags; + } + return lc->flags; +} + +static int gpio_v2_line_config_output_value(struct gpio_v2_line_config *lc, + int line_idx) +{ + int i; + u64 mask = BIT_ULL(line_idx); + + for (i = 0; i < lc->num_attrs; i++) { + if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES) && + (lc->attrs[i].mask & mask)) + return !!(lc->attrs[i].attr.values & mask); + } + return 0; +} + +static int gpio_v2_line_flags_validate(u64 flags) +{ + /* Return an error if an unknown flag is set */ + if (flags & ~GPIO_V2_LINE_VALID_FLAGS) + return -EINVAL; + + /* + * Do not allow both INPUT & OUTPUT flags to be set as they are + * contradictory. + */ + if ((flags & GPIO_V2_LINE_FLAG_INPUT) && + (flags & GPIO_V2_LINE_FLAG_OUTPUT)) + return -EINVAL; + + /* + * Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If + * the hardware actually supports enabling both at the same time the + * electrical result would be disastrous. + */ + if ((flags & GPIO_V2_LINE_FLAG_OPEN_DRAIN) && + (flags & GPIO_V2_LINE_FLAG_OPEN_SOURCE)) + return -EINVAL; + + /* Drive requires explicit output direction. */ + if ((flags & GPIO_V2_LINE_DRIVE_FLAGS) && + !(flags & GPIO_V2_LINE_FLAG_OUTPUT)) + return -EINVAL; + + /* Bias requies explicit direction. */ + if ((flags & GPIO_V2_LINE_BIAS_FLAGS) && + !(flags & GPIO_V2_LINE_DIRECTION_FLAGS)) + return -EINVAL; + + /* Only one bias flag can be set. */ + if (((flags & GPIO_V2_LINE_FLAG_BIAS_DISABLED) && + (flags & (GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN | + GPIO_V2_LINE_FLAG_BIAS_PULL_UP))) || + ((flags & GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN) && + (flags & GPIO_V2_LINE_FLAG_BIAS_PULL_UP))) + return -EINVAL; + + return 0; +} + +static int gpio_v2_line_config_validate(struct gpio_v2_line_config *lc, + int num_lines) +{ + int i, ret; + u64 flags; + + if (lc->num_attrs > GPIO_V2_LINE_NUM_ATTRS_MAX) + return -EINVAL; + + if (memchr_inv(lc->padding, 0, sizeof(lc->padding))) + return -EINVAL; + + for (i = 0; i < num_lines; i++) { + flags = gpio_v2_line_config_flags(lc, i); + ret = gpio_v2_line_flags_validate(flags); + if (ret) + return ret; + } + return 0; +} + +static void gpio_v2_line_config_flags_to_desc_flags(u64 flags, + unsigned long *flagsp) +{ + assign_bit(FLAG_ACTIVE_LOW, flagsp, + flags & GPIO_V2_LINE_FLAG_ACTIVE_LOW); + if (flags & GPIO_V2_LINE_FLAG_OUTPUT) + set_bit(FLAG_IS_OUT, flagsp); + else if (flags & GPIO_V2_LINE_FLAG_INPUT) + clear_bit(FLAG_IS_OUT, flagsp); + assign_bit(FLAG_OPEN_DRAIN, flagsp, + flags & GPIO_V2_LINE_FLAG_OPEN_DRAIN); + assign_bit(FLAG_OPEN_SOURCE, flagsp, + flags & GPIO_V2_LINE_FLAG_OPEN_SOURCE); + assign_bit(FLAG_PULL_UP, flagsp, + flags & GPIO_V2_LINE_FLAG_BIAS_PULL_UP); + assign_bit(FLAG_PULL_DOWN, flagsp, + flags & GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN); + assign_bit(FLAG_BIAS_DISABLE, flagsp, + flags & GPIO_V2_LINE_FLAG_BIAS_DISABLED); +} + +static long line_get_values(struct line *line, void __user *ip) +{ + struct gpio_v2_line_values lv; + DECLARE_BITMAP(vals, GPIO_V2_LINES_MAX); + DECLARE_BITMAP(mask, GPIO_V2_LINES_MAX); + struct gpio_desc **descs; + int ret, i, didx, num_get = 0; + + /* NOTE: It's ok to read values of output lines. */ + if (copy_from_user(&lv, ip, sizeof(lv))) + return -EFAULT; + + if (lv.mask == 0) + return -EINVAL; + + bitmap_from_u64(mask, lv.mask); + num_get = bitmap_weight(mask, line->num_descs); + if (num_get == line->num_descs) { + descs = line->descs; + } else { + descs = kmalloc_array(num_get, sizeof(*descs), GFP_KERNEL); + for (didx = 0, i = 0; i < line->num_descs; i++) { + if (test_bit(i, mask)) { + descs[didx] = line->descs[i]; + didx++; + } + } + } + ret = gpiod_get_array_value_complex(false, + true, + num_get, + descs, + NULL, + vals); + + if (descs != line->descs) + kfree(descs); + if (ret) + return ret; + + lv.bits = 0; + for (didx = 0, i = 0; i < line->num_descs; i++) { + if (test_bit(i, mask)) { + if (test_bit(didx, vals)) + lv.bits |= BIT_ULL(i); + didx++; + } + } + + if (copy_to_user(ip, &lv, sizeof(lv))) + return -EFAULT; + + return 0; +} + +static long line_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct line *line = file->private_data; + void __user *ip = (void __user *)arg; + + if (cmd == GPIO_V2_LINE_GET_VALUES_IOCTL) + return line_get_values(line, ip); + + return -EINVAL; +} + +#ifdef CONFIG_COMPAT +static long line_ioctl_compat(struct file *file, unsigned int cmd, + unsigned long arg) +{ + return line_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); +} +#endif + +static void line_free(struct line *line) +{ + int i; + + for (i = 0; i < line->num_descs; i++) { + if (line->descs[i]) + gpiod_free(line->descs[i]); + } + kfree(line->label); + put_device(&line->gdev->dev); + kfree(line); +} + +static int line_release(struct inode *inode, struct file *file) +{ + struct line *line = file->private_data; + + line_free(line); + return 0; +} + +static const struct file_operations line_fileops = { + .release = line_release, + .owner = THIS_MODULE, + .llseek = noop_llseek, + .unlocked_ioctl = line_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = line_ioctl_compat, +#endif +}; + +static int line_create(struct gpio_device *gdev, void __user *ip) +{ + struct gpio_v2_line_request lr; + struct line *line; + struct file *file; + int fd, i, ret; + struct gpio_v2_line_config *lc; + unsigned long flags; + + if (copy_from_user(&lr, ip, sizeof(lr))) + return -EFAULT; + if ((lr.num_lines == 0) || (lr.num_lines > GPIO_V2_LINES_MAX)) + return -EINVAL; + + if (memchr_inv(lr.padding, 0, sizeof(lr.padding))) + return -EINVAL; + + lc = &lr.config; + ret = gpio_v2_line_config_validate(lc, lr.num_lines); + if (ret) + return ret; + + line = kzalloc(struct_size(line, descs, lr.num_lines), + GFP_KERNEL); + if (!line) + return -ENOMEM; + + line->gdev = gdev; + get_device(&gdev->dev); + + /* Make sure this is terminated */ + lr.consumer[sizeof(lr.consumer)-1] = '\0'; + if (strlen(lr.consumer)) { + line->label = kstrdup(lr.consumer, GFP_KERNEL); + if (!line->label) { + ret = -ENOMEM; + goto out_free_line; + } + } + + line->num_descs = lr.num_lines; + + /* Request each GPIO */ + for (i = 0; i < lr.num_lines; i++) { + u32 offset = lr.offsets[i]; + struct gpio_desc *desc = gpiochip_get_desc(gdev->chip, offset); + + if (IS_ERR(desc)) { + ret = PTR_ERR(desc); + goto out_free_line; + } + + ret = gpiod_request(desc, line->label); + if (ret) + goto out_free_line; + + line->descs[i] = desc; + flags = gpio_v2_line_config_flags(lc, i); + gpio_v2_line_config_flags_to_desc_flags(flags, &desc->flags); + + ret = gpiod_set_transitory(desc, false); + if (ret < 0) + goto out_free_line; + + /* + * Lines have to be requested explicitly for input + * or output, else the line will be treated "as is". + */ + if (flags & GPIO_V2_LINE_FLAG_OUTPUT) { + int val = gpio_v2_line_config_output_value(lc, i); + + ret = gpiod_direction_output(desc, val); + if (ret) + goto out_free_line; + } else if (flags & GPIO_V2_LINE_FLAG_INPUT) { + ret = gpiod_direction_input(desc); + if (ret) + goto out_free_line; + } + + blocking_notifier_call_chain(&desc->gdev->notifier, + GPIOLINE_CHANGED_REQUESTED, desc); + + dev_dbg(&gdev->dev, "registered chardev handle for line %d\n", + offset); + } + + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); + if (fd < 0) { + ret = fd; + goto out_free_line; + } + + file = anon_inode_getfile("gpio-line", + &line_fileops, + line, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + + lr.fd = fd; + if (copy_to_user(ip, &lr, sizeof(lr))) { + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; + } + + fd_install(fd, file); + + dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n", + line->num_descs); + + return 0; + +out_put_unused_fd: + put_unused_fd(fd); +out_free_line: + line_free(line); + return ret; +} + +#ifdef CONFIG_GPIO_CDEV_V1 /* * GPIO line event management @@ -745,6 +1132,8 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) return ret; } +#endif /* CONFIG_GPIO_CDEV_V1 */ + static void gpio_desc_to_lineinfo(struct gpio_desc *desc, struct gpioline_info *info) { @@ -850,6 +1239,7 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (copy_to_user(ip, &chipinfo, sizeof(chipinfo))) return -EFAULT; return 0; +#ifdef CONFIG_GPIO_CDEV_V1 } else if (cmd == GPIO_GET_LINEINFO_IOCTL) { struct gpioline_info lineinfo; @@ -892,6 +1282,9 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return 0; +#endif /* CONFIG_GPIO_CDEV_V1 */ + } else if (cmd == GPIO_V2_GET_LINE_IOCTL) { + return line_create(gdev, ip); } else if (cmd == GPIO_GET_LINEINFO_UNWATCH_IOCTL) { if (copy_from_user(&offset, ip, sizeof(offset))) return -EFAULT; @@ -1118,4 +1511,24 @@ int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt) void gpiolib_cdev_unregister(struct gpio_device *gdev) { cdev_device_del(&gdev->chrdev, &gdev->dev); + + /* + * array sizes must ensure 64-bit alignment and not create holes in + * the struct packing. + */ + BUILD_BUG_ON(GPIO_V2_LINES_MAX % 2); + BUILD_BUG_ON(GPIO_MAX_NAME_SIZE % 8); + + /* + * check that uAPI structs are 64-bit aligned for 32/64-bit + * compatibility + */ + BUILD_BUG_ON(sizeof(struct gpio_v2_line_attribute) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_config_attribute) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_config) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_request) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_info) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_info_changed) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_event) % 8); + BUILD_BUG_ON(sizeof(struct gpio_v2_line_values) % 8); } -- 2.28.0