Re: pinctrl: sx150x bug

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Wed, Aug 5, 2020 at 11:28 AM Martin DEVERA <devik@xxxxxxxxxx> wrote:

> I encountered bug in SX1502 expander driver in 5.7.7. Here is relevant
> DTS part:
>
> compatible = "semtech,sx1502q";
> gpio4_cfg_pins: gpio2-cfg {
>                          pins = "gpio5";
>                          output-high;
>      };
>
> And part of OOPS:
>
> [    0.673996] [<c023cfa6>] (gpiochip_get_data) from [<c023b235>]
> (sx150x_gpio_direction_output+0xd)
> [    0.683259] [<c023b235>] (sx150x_gpio_direction_output) from
> [<c023b363>] (sx150x_pinconf_set+0x)
> [    0.692796] [<c023b363>] (sx150x_pinconf_set) from [<c0238fef>]
> (pinconf_apply_setting+0x39/0x7e)
> [    0.701635] [<c0238fef>] (pinconf_apply_setting) from [<c0236c77>]
> (pinctrl_commit_state+0xa5/0x)
> [    0.710648] [<c0236c77>] (pinctrl_commit_state) from [<c0237e03>]
> (pinctrl_enable+0xff/0x1d4)
> [    0.719139] [<c0237e03>] (pinctrl_enable) from [<c023b791>]
> (sx150x_probe+0x1a3/0x358)
> [    0.727027] [<c023b791>] (sx150x_probe) from [<c02c38bf>]
> (i2c_device_probe+0x1bb/0x1dc)
>
> The problem is that sx150x_pinconf_set uses sx150x_gpio_direction_output
> but gpio is not
> setup yet. Patch below fixes it but I'm not sure whether is it correct:

I simply rebased and applied this patch now.

Yours,
Linus Walleij