[PATCH v2 1/3] pinctrl: sh-pfc: collect Renesas related CONFIGs in one place

[Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>]

From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

Renesas related pinctrl CONFIGs are located many places,
and it is confusable.
This patch collects these into same place,
and group into "Renesas pinctrl drivers" menu.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
 drivers/pinctrl/Kconfig        | 32 ------------------------------
 drivers/pinctrl/sh-pfc/Kconfig | 36 ++++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 32 deletions(-)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8828613c4e0e..f63c5a04a3f7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -213,38 +213,6 @@ config PINCTRL_ROCKCHIP
 	select GENERIC_IRQ_CHIP
 	select MFD_SYSCON
 
-config PINCTRL_RZA1
-	bool "Renesas RZ/A1 gpio and pinctrl driver"
-	depends on OF
-	depends on ARCH_R7S72100 || COMPILE_TEST
-	select GPIOLIB
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects pinctrl driver for Renesas RZ/A1 platforms.
-
-config PINCTRL_RZA2
-	bool "Renesas RZ/A2 gpio and pinctrl driver"
-	depends on OF
-	depends on ARCH_R7S9210 || COMPILE_TEST
-	select GPIOLIB
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
-
-config PINCTRL_RZN1
-	bool "Renesas RZ/N1 pinctrl driver"
-	depends on OF
-	depends on ARCH_RZN1 || COMPILE_TEST
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects pinctrl driver for Renesas RZ/N1 devices.
-
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index c461a2f1927a..a16393e6b9c2 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -3,6 +3,8 @@
 # Renesas SH and SH Mobile PINCTRL drivers
 #
 
+menu "Renesas pinctrl drivers"
+
 config PINCTRL_SH_PFC
 	bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
 	default y if ARCH_RENESAS || SUPERH
@@ -52,6 +54,38 @@ config PINCTRL_SH_PFC
 	help
 	  This enables pin control drivers for Renesas SuperH and ARM platforms
 
+config PINCTRL_RZA1
+	bool "RZ/A1 gpio and pinctrl driver"
+	depends on OF
+	depends on ARCH_R7S72100 || COMPILE_TEST
+	select GPIOLIB
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/A1 platforms.
+
+config PINCTRL_RZA2
+	bool "RZ/A2 gpio and pinctrl driver"
+	depends on OF
+	depends on ARCH_R7S9210 || COMPILE_TEST
+	select GPIOLIB
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
+
+config PINCTRL_RZN1
+	bool "RZ/N1 pinctrl driver"
+	depends on OF
+	depends on ARCH_RZN1 || COMPILE_TEST
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/N1 devices.
+
 config PINCTRL_SH_PFC_GPIO
 	select GPIOLIB
 	bool
@@ -199,3 +233,5 @@ config PINCTRL_PFC_SH7786
 config PINCTRL_PFC_SHX3
 	bool "SH-X3 pin control support" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
+
+endmenu
-- 
2.25.1