[PATCH] pinctrl: rza1: Switch to using "output-enable"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For pins requiring software driven IO output operations, the RZ/A1 Pin
Controller uses either the "output-high" or "output-low" DT property to
enable the corresponding output buffer.  The actual line value doesn't
matter, as it is ignored.

Commit 425562429d4f3b13 ("pinctrl: generic: Add output-enable property")
introduced a new DT property for this specific use case.

Update the RZ/A1 Pin Controller DT bindings and driver to use this new
property instead.  Preserve backwards compatibility with old DTBs in the
driver, as this comes at a very small cost.

Notes:
  - The DT binding examples already used the new property,
  - There are no upstream users of the old properties.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in sh-pfc for v5.10.

 .../devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt     | 5 ++---
 drivers/pinctrl/pinctrl-rza1.c                               | 3 ++-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
index fd3696eb36bf307e..38cdd23d3498e74a 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
@@ -117,10 +117,9 @@ function or a GPIO controller alternatively.
     - input-enable:
       enable input bufer for pins requiring software driven IO input
       operations.
-    - output-high:
+    - output-enable:
       enable output buffer for pins requiring software driven IO output
-      operations. output-low can be used alternatively, as line value is
-      ignored by the driver.
+      operations.
 
   The hardware reference manual specifies when a pin has to be configured to
   work in bi-directional mode and when the IO direction has to be specified
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
index 511f232ab7bc290c..944466ef34d33f51 100644
--- a/drivers/pinctrl/pinctrl-rza1.c
+++ b/drivers/pinctrl/pinctrl-rza1.c
@@ -928,7 +928,8 @@ static int rza1_parse_pinmux_node(struct rza1_pinctrl *rza1_pctl,
 		case PIN_CONFIG_INPUT_ENABLE:
 			pinmux_flags |= MUX_FLAGS_SWIO_INPUT;
 			break;
-		case PIN_CONFIG_OUTPUT:
+		case PIN_CONFIG_OUTPUT:	/* for DT backwards compatibility */
+		case PIN_CONFIG_OUTPUT_ENABLE:
 			pinmux_flags |= MUX_FLAGS_SWIO_OUTPUT;
 		default:
 			break;
-- 
2.17.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux