Linux GPIO

• Thread Index

• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 01/32] of: Fix property supplier parsing
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 01/32] of: Fix property supplier parsing
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: How to handle a level-triggered interrupt that is slow to de-assert itself
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Syed Nayyar Waris <syednwaris@xxxxxxxxx>
• Re: [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: How to handle a level-triggered interrupt that is slow to de-assert itself
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH v8 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: How to handle a level-triggered interrupt that is slow to de-assert itself
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v8 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 05/32] spi: dw: Introduce DW_SPI_CAP_POLL_NODELAY
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/4] pinctrl: amd: remove debounce filter setting in IRQ type setting
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• RE: [PATCH v4 4/4] mmc: sdhci-of-arasan: Enable UHS-1 support for Keem Bay SOC
  • From: "Zulkifli, Muhammad Husaini" <muhammad.husaini.zulkifli@xxxxxxxxx>
• Re: [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH v8 3/3] arm64: dts: sparx5: Add SGPIO devices
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v8 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v8 0/3] Adding support for Microchip/Microsemi serial GPIO controller
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• How to handle a level-triggered interrupt that is slow to de-assert itself
  • From: "Jamie McClymont" <jamie@xxxxxxxxxx>
• Re: [PATCH 00/32] RISC-V Kendryte K210 support improvments
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 00/32] RISC-V Kendryte K210 support improvments
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Syed Nayyar Waris <syednwaris@xxxxxxxxx>
• [PATCH v3 5/5] ARM: mstar: Fill in GPIO controller properties for infinity
  • From: Daniel Palmer <daniel@xxxxxxxx>
• [PATCH v3 4/5] ARM: mstar: Add gpio controller to MStar base dtsi
  • From: Daniel Palmer <daniel@xxxxxxxx>
• [PATCH v3 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• [PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  • From: Daniel Palmer <daniel@xxxxxxxx>
• [PATCH v3 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• [PATCH v3 0/5] Add GPIO support for MStar/SigmaStar ARMv7
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH v1] ARM: Drop ARCH_NR_GPIOS definition
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] sh: Drop ARCH_NR_GPIOS definition
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] pinctrl: pinctrl-at91-pio4: Set irq handler and data in one go
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 0/9] slab: provide and use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 3/9] ALSA: pcm: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/9] mm: slab: clarify krealloc()'s behavior with __GFP_ZERO
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 2/9] mm: slab: provide krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 4/9] vhost: vringh: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 5/9] pinctrl: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 8/9] hwtracing: intel: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 7/9] drm: atomic: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 9/9] dma-buf: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 6/9] edac: ghes: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [gpio:gpio-descriptors-extcon-cleanup 3/4] drivers/extcon/extcon-gpio.c:85:10: error: 'struct gpio_extcon_data' has no member named 'extcon_id'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• RE: [PATCH V2 0/3] gpio-xilinx: Update on xilinx gpio driver
  • From: Srinivas Neeli <sneeli@xxxxxxxxxx>
• [PATCH] gpio: sifive: To get gpio irq offset from device tree data
  • From: Greentime Hu <greentime.hu@xxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 0/2] pinctrl: qcom: Add binding and driver for SDX55 pincontrol
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] pinctrl: pinctrl-at91-pio4: Set irq handler and data in one go
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH] pinctrl: msm: Use dynamic GPIO numbering
  • From: Arun KS <arunks.linux@xxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 30/32] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 27/32] riscv: Add SiPeed MAIX BiT board device tree
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 26/32] riscv: Update Kendryte K210 device tree
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 25/32] dt-bindings: Document kendryte,k210-rst bindings
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 24/32] dt-bindings: Document kendryte,k210-fpioa bindings
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 23/32] dt-binding: Document kendryte,k210-clk bindings
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 22/32] dt-binding: Document kendryte,k210-sysctl bindings
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 21/32] dt-bindings: Add Kendryte and Canaan vendor prefix
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 19/32] riscv: Add Kendryte K210 SoC reset controller
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 18/32] riscv: Add Kendryte K210 SoC clock driver
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 17/32] dt-bindings: Define Kendryte K210 reset signals
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 16/32] dt-bindings: Define Kendryte K210 pin functions
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 15/32] dt-bindings: Define Kendryte K210 sysctl registers
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 14/32] dt-bindings: Define all Kendryte K210 clock IDs
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• [PATCH 32/32] riscv: Update Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 31/32] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 30/32] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 29/32] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 28/32] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 27/32] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 26/32] riscv: Update Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 25/32] dt-bindings: Document kendryte,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 24/32] dt-bindings: Document kendryte,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 23/32] dt-binding: Document kendryte,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 22/32] dt-binding: Document kendryte,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 21/32] dt-bindings: Add Kendryte and Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 20/32] riscv: Add Kendryte K210 FPIOA pinctrl driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 19/32] riscv: Add Kendryte K210 SoC reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 18/32] riscv: Add Kendryte K210 SoC clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 17/32] dt-bindings: Define Kendryte K210 reset signals
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 16/32] dt-bindings: Define Kendryte K210 pin functions
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 15/32] dt-bindings: Define Kendryte K210 sysctl registers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 14/32] dt-bindings: Define all Kendryte K210 clock IDs
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 13/32] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 12/32] riscv: Automatically select sysctl config options
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 11/32] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 10/32] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 09/32] riscv: Fix SiFive gpio probe
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 08/32] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 07/32] dt-bindings: Update DW SPI device tree bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 05/32] spi: dw: Introduce DW_SPI_CAP_POLL_NODELAY
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 04/32] spi: dw: Introduce polling device tree property
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 01/32] of: Fix property supplier parsing
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 00/32] RISC-V Kendryte K210 support improvments
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH V2 0/3] gpio-xilinx: Update on xilinx gpio driver
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v3 0/4] gpiolib: acpi: pin configuration fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 6/9] gpiolib: acpi: Extract acpi_request_own_gpiod() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 5/9] gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 9/9] gpiolib: acpi: Make Intel GPIO tree official for GPIO ACPI work
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 7/9] gpiolib: acpi: Convert pin_index to be u16
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 8/9] gpiolib: acpi: Use BIT() macro to increase readability
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/9] gpiolib: acpi: Use named item for enum gpiod_flags variable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 4/9] gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 0/9] gpiolib: acpi: pin configuration fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 1/9] gpiolib: acpi: Respect bias settings for GpioInt() resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [GIT PULL] intel-pinctrl for 5.10-2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• linusw/for-next baseline: 126 runs, 2 regressions (v5.10-rc1-12-g9a6907e948a3)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] gpiolib: acpi: pin configuration fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• linusw/for-next build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc1-12-g9a6907e948a3)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc1-5-gb9bf97105f4b9)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] gpio: tegra: Use raw_spinlock
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] gpio: tegra: Add lockdep class
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [GIT PULL] gpio: fixes for v5.10-rc3
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/3] gpio: pcie-idio-24: Fix IRQ handling
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] gpiolib: acpi: pin configuration fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: ingenic: Get rid of repetitive data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC 3/3] pinctl: mt7622: drop pwm ch7 as mt7622 only has 6 channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] gpio: Do not trigger WARN() with sysfs gpio export/unexport
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [RFC PATCH 1/1] gpio: sifive: To get gpio irq offset from device tree data
  • From: Greentime Hu <greentime.hu@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/4] Extend pinctrl ocelot driver to support other SoCs
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 4/4] pinctrl: ocelot: Add support for Serval platforms
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 3/4] pinctrl: ocelot: Add support for Luton platforms
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: pinctrl: ocelot: Add Serval SoC support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: pinctrl: ocelot: Add Luton SoC support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] gpio: Do not trigger WARN() with sysfs gpio export/unexport
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] gpio: sifive: To get gpio irq offset from device tree data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] pinctrl: ocelot: Remove unnecessary conversion to bool
  • From: xiakaixu1987@xxxxxxxxx
• [PATCH v6 2/3] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v6 3/3] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v6 1/3] pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a selected config
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [RFC PATCH 1/1] gpio: sifive: To get gpio irq offset from device tree data
  • From: Greentime Hu <greentime.hu@xxxxxxxxxx>
• Re: [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v5 1/2] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH v2 0/4] pinctrl: amd: debounce filter fixes
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 4/4] pinctrl: amd: remove debounce filter setting in IRQ type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 3/4] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 0/4] pinctrl: amd: debounce filter fixes
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH v5 1/2] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl/meson: enable building as modules
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/4] pinctrl: amd: debounce filter fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] gpiolib: of: Use named item for enum gpiod_flags variable
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH v2 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sm8250: Specify PDC map
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] pinctrl: Remove hole in pinctrl_gpio_range
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: Is consumer documentation correct?
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/4] pinctrl: amd: debounce filter fixes
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH] gpiolib: fix sysfs when cdev is not selected
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: aspeed: Fix GPI only function problem.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [libgpiod] libgpiod v2.0 API discussion
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 0/3] Adding support for Microchip/Microsemi serial GPIO controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/2] pinctrl: ingenic: Cleanup & add lcd-8bit group
  • From: Zhou Yanjie <zhouyanjie@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: add pinctrl driver for msm8953
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sm8250: Specify PDC map
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: Remove hole in pinctrl_gpio_range
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 23/33] docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: core: Add missing #ifdef CONFIG_GPIOLIB
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [libgpiod] libgpiod v2.0 API discussion
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 0/4] pinctrl: amd: debounce filter fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: gpiolib sysfs access when CONFIG_GPIO_CDEV is not set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: gpiolib sysfs access when CONFIG_GPIO_CDEV is not set
  • From: Nicolas Schichan <nschichan@xxxxxxxxxx>
• [PATCH v2 1/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] gpiolib: fix sysfs when cdev is not selected
  • From: Nicolas Schichan <nschichan@xxxxxxxxxx>
• Re: [PATCH v2 4/4] pinctrl: amd: remove debounce filter setting in irq type setting
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/8] slab: provide and use krealloc_array()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpiolib: fix sysfs when cdev is not selected
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2] pinctrl/meson: enable building as modules
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: mcp23s08: Use full chunk of memory for regmap configuration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: gpio: pca953x: Add support for the NXP PCAL9554B/C
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3] dt-bindings: gpio: pca953x: Add support for the NXP PCAL9554B/C
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Fwd: [PATCH] Pin control: core.c Eliminate three compiler warnings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: msm: Use dynamic GPIO numbering
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/8] pinctrl: renesas: Reorder struct sh_pfc_pin to remove hole
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: qcom: Add sc7280 pinctrl driver
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add sc7280 pinctrl bindings
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] pinctrl: renesas: Cleanups and improvements
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/8] pinctrl: renesas: Reorder struct sh_pfc_pin to remove hole
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: mstar: Fill in GPIO controller properties for infinity
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: mstar: Add gpio controller to MStar base dtsi
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 01/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Willy Tarreau <w@xxxxxx>
• Re: [PATCH v2 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 01/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get()
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 01/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v12 3/4] gpio: thunderx: Utilize for_each_set_clump macro
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 03/11] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] gpiolib: of: Use named item for enum gpiod_flags variable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: gpiolib sysfs access when CONFIG_GPIO_CDEV is not set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback
  • From: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
• Re: [libgpiod] libgpiod v2.0 API discussion
  • From: Helmut Grohne <helmut.grohne@xxxxxxxxxx>
• Re: [libgpiod] libgpiod v2.0 API discussion
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [pinctrl:for-next] BUILD SUCCESS 1f955a68d179cdbad083d85e0fbb6ec7360a03d1
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:fixes] BUILD SUCCESS 8045ec42d14c6f77b5e925d1421150c043dfb75d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] pinctrl: amd: remove debounce filter setting in irq type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v2 4/4] pinctrl: amd: remove debounce filter setting in irq type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v2 3/4] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v2 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v2 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] pinctrl: amd: remove debounce filter setting in irq type setting
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/8] gpio: exar: refactor the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v2 4/8] gpio: exar: switch to a simpler IDA interface
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/8] regmap: provide regmap_assign_bits()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/8] gpio: exar: refactor the driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH v2 6/8] gpio: exar: unduplicate address and offset computation
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 8/8] gpio: exar: use devm action for freeing the IDA and drop remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH v2 7/8] gpio: exar: switch to using regmap
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 5/8] gpio: exar: use a helper variable for &pdev->dev
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 3/8] gpio: exar: include idr.h
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/8] gpio: exar: add a newline after the copyright notice
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• gpiolib sysfs access when CONFIG_GPIO_CDEV is not set
  • From: Nicolas Schichan <nschichan@xxxxxxxxxx>
• [PATCH v2 2/2] gpio: tegra: Use raw_spinlock
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 1/2] gpio: tegra: Add lockdep class
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [RFT PATCH 6/7] gpio: exar: switch to using regmap
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/4] pinctrl: amd: remove debounce filter setting in irq type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH 3/4] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH 2/4] pinctrl: amd: use higher precision for 512 RtcClk
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH 3/3] gpio: pcie-idio-24: Enable PEX8311 interrupts
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/3] gpio: pcie-idio-24: Fix IRQ Enable Register value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/3] gpio: pcie-idio-24: Fix irq mask when masking
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [libgpiod][PATCH v3] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 0/3] gpio: pcie-idio-24: Fix IRQ handling
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [libgpiod][RFC PATCH] bindings: cxx: demote the line's parent chip reference to a weak_ptr
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/3] gpio: pcie-idio-24: Fix irq mask when masking
  • From: Arnaud de Turckheim <quarium@xxxxxxxxx>
• [PATCH 2/3] gpio: pcie-idio-24: Fix IRQ Enable Register value
  • From: Arnaud de Turckheim <quarium@xxxxxxxxx>
• [PATCH 3/3] gpio: pcie-idio-24: Enable PEX8311 interrupts
  • From: Arnaud de Turckheim <quarium@xxxxxxxxx>
• [PATCH 0/3] gpio: pcie-idio-24: Fix IRQ handling
  • From: Arnaud de Turckheim <quarium@xxxxxxxxx>
• Re: [PATCH v1 2/2] gpio: tegra: Use raw_spinlock
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] gpio: tegra: Use raw_spinlock
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/5] mfd: tps65910: clean up after switching to regmap
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/5] mfd: tps65911-comparator: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH v1 2/2] gpio: tegra: Use raw_spinlock
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 1/2] gpio: tegra: Add lockdep class
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH] gpio: Do not trigger WARN() with sysfs gpio export/unexport
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 07/11] input: raspberrypi-ts: Release firmware handle when not needed
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 08/11] firmware: raspberrypi: Get rid of rpi_firmware_get()
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 06/11] staging: vchiq: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 04/11] reset: raspberrypi: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 03/11] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 00/11] Raspberry Pi PoE HAT fan support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 02/11] clk: bcm: rpi: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 05/11] soc: bcm: raspberrypi-power: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 11/11] pwm: Add Raspberry Pi Firmware based PWM bus
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 01/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get()
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH 3/4] selftests/gpio: Fix build when source tree is read only
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• [PATCH 2/4] selftests/gpio: Move include of lib.mk up
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• [PATCH 4/4] selftests/gpio: Add to CLEAN rule rather than overriding
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• [PATCH 1/4] selftests/gpio: Use TEST_GEN_PROGS_EXTENDED
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [libgpiod] libgpiod v2.0 API discussion
  • From: Helmut Grohne <helmut.grohne@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] PCI: Add the IDs for Etron EJ168 and EJ188
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [libgpiod] libgpiod v2.0 API discussion
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [libgpiod] C++ Bindings ABI Compatibility
  • From: Jack Winch <sunt.un.morcov@xxxxxxxxx>
• Re: [libgpiod] C++ Bindings ABI Compatibility
  • From: Jack Winch <sunt.un.morcov@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add sc7280 pinctrl driver
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Elkhart Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: lynxpoint: Unify initcall location in the code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v3] x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 0/8] slab: provide and use krealloc_array()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3 v3] x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3 v3] x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 0/8] slab: provide and use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] gpiolib: acpi: Respect bias settings for GpioInt() resource
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 0/8] slab: provide and use krealloc_array()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 3/3 v3] x86/platform/geode: Convert alix LED to GPIO machine descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v3] x86/platform/geode: Convert geode LED to GPIO machine descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v3] x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v3 4/4] gpiolib: acpi: Convert pin_index to be u16
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] gpiolib: acpi: Take into account debounce settings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/4] gpiolib: acpi: Use named item for enum gpiod_flags variable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/4] gpiolib: acpi: Respect bias settings for GpioInt() resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] gpiolib: acpi: pin configuration fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] gpiolib: acpi: Respect bias settings for GpioInt() resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: lynxpoint: Unify initcall location in the code
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Elkhart Lake pin controller support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] dma-buf: use krealloc_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] mm: slab: provide krealloc_array()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] mm: slab: provide krealloc_array()
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• [PATCH v2 0/8] slab: provide and use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/8] mm: slab: provide krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/8] ALSA: pcm: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 3/8] vhost: vringh: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 4/8] pinctrl: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 5/8] edac: ghes: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 7/8] hwtracing: intel: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 8/8] dma-buf: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 6/8] drm: atomic: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v1] pinctrl: lynxpoint: Unify initcall location in the code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] pinctrl: intel: Add Intel Elkhart Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [RFT PATCH 5/7] gpio: exar: unduplicate address and offset computation
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [RFT PATCH 5/7] gpio: exar: unduplicate address and offset computation
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFT PATCH 5/7] gpio: exar: unduplicate address and offset computation
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: kernel test robot <lkp@xxxxxxxxx>
• [RFC PATCH] pinctrl: pinctrl-microchip-sgpio: properties_luton can be static
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 2/2] pinctrl: ingenic: Add lcd-8bit group for JZ4770
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 1/2] pinctrl: ingenic: Get rid of repetitive data
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 0/2] pinctrl: ingenic: Cleanup & add lcd-8bit group
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v5 1/2] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• RE: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 3/3] pinctl: mt7622: drop pwm ch7 as mt7622 only has 6 channels
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Fix entry name for I/O High Voltage property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 08/10] dt-bindings: pwm: Add binding for RPi firmware PWM bus
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/4] gpio: rcar: Cleanups and improvements
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] gpiolib: cdev: add GPIO_V2_LINE_FLAG_EDGE_BOTH and use it in edge_irq_thread()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [libgpiod][PATCH v3] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: Ilya Dryomov <idryomov@xxxxxxxxx>
• Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• RE: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: "Rojewski, Cezary" <cezary.rojewski@xxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• [PATCH v2 24/39] docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v4 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Vaibhav Jain <vaibhav@xxxxxxxxxxxxx>
• [PATCH v4 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v4 1/2] pinctrl: qcom: Allow pinctrl-msm code to be loadable as a module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: aspeed: Fix GPI only function problem.
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• [PATCH v2] pinctrl: aspeed: Fix GPI only function problem.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH] pinctrl: aspeed: Fix GPI only function problem.
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] pinctrl: aspeed: Fix GPI only function problem.
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• [gpio:for-next] BUILD SUCCESS 50afb29ae41368d750cf46bece2b13065b0e9cef
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:for-next] BUILD SUCCESS 03dec17c36a7376423bff60edbaf42df5d91af53
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH v2 1/3] Documentation: firmware-guide: gpio-properties: Fix factual mistakes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] Documentation: firmware-guide: gpio-properties: Clarify initial output state
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/8] pinctrl: use krealloc_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• linusw/for-next baseline: 119 runs, 2 regressions (v5.10-rc1-11-g50afb29ae413)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• linusw/for-next build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc1-11-g50afb29ae413)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 2/3] dt-bindings: gpio: Add binding documentation for Etron EJ168/EJ188/EJ198
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC 3/3] pinctl: mt7622: drop pwm ch7 as mt7622 only has 6 channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Oded Gabbay <oded.gabbay@xxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: kajoljain <kjain@xxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add blank line before endif in Kconfig
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: Add Intel Alder Lake-S pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add sc7280 pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add sc7280 pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v7 3/3] arm64: dts: sparx5: Add SGPIO devices
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v7 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v7 0/3] Adding support for Microchip/Microsemi serial GPIO controller
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add blank line before endif in Kconfig
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: Add Intel Alder Lake-S pin controller support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] pinctrl: use krealloc_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] pinctrl: intel: Add blank line before endif in Kconfig
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2] pinctrl: intel: Add Intel Alder Lake-S pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Lakefield pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] Documentation: firmware-guide: gpio-properties: Fix factual mistakes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] gpio: mockup: Allow probing from device tree
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] gpiolib: cdev: add GPIO_V2_LINE_FLAG_EDGE_BOTH and use it in edge_irq_thread()
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v4] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH v1 3/3] Documentation: firmware-guide: gpio-properties: Clarify initial output state
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] Documentation: firmware-guide: gpio-properties: Fix factual mistakes
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Lakefield pin controller support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [pinctrl:devel] BUILD SUCCESS e2d6e5b8aa44471f0a4614fc924f7ced659d3d14
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:fixes] BUILD SUCCESS db507d45f064758d2bd21792d8ba6a8b440906a6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:devel] BUILD SUCCESS 8aa16335050663357281fb1f1b0483ab91b4d8de
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:fixes] BUILD SUCCESS 7ffa08169849be898eed6f3694aab8c425497749
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH] Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc1-4-g8aa163350506)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 0/3] rockchip-pinctrl fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH 1/8] mm: slab: provide krealloc_array()
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 30/33] docs: ABI: cleanup several ABI documents
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/8] pinctrl: renesas: Singular/plural grammar fixes
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: Is consumer documentation correct?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] pinctrl: core: Add missing #ifdef CONFIG_GPIOLIB
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] Arm: dts: aspeed-g6: Add sgpio node
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 0/8] pinctrl: renesas: Cleanups and improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/8] pinctrl: renesas: Reorder struct sh_pfc_pin to remove hole
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 8/8] pinctrl: renesas: Protect GPIO leftovers by CONFIG_PINCTRL_SH_FUNC_GPIO
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 6/8] pinctrl: renesas: r8a7778: Use physical addresses for PUPR regs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 7/8] pinctrl: renesas: r8a7778: Use common R-Car bias handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: Request for pre-review of pending MID removal patch series
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] pinctrl: Remove hole in pinctrl_gpio_range
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: add pinctrl driver for msm8953
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: pinctrl: qcom: add msm8953 pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] gpio: rcar: Implement gpio_chip.get_multiple()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/4] gpio: rcar: Cleanups and improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• linusw/devel baseline: 116 runs, 1 regressions (v5.10-rc1-4-g8aa163350506)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: Request for pre-review of pending MID removal patch series
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/4] gpio: rcar: Align register offsets
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/4] gpio: rcar: Rework hardware features handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/4] gpio: rcar: Cache gpiochip_get_data() return value
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH] pinctrl: qcom: sm8250: Specify PDC map
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/8] pinctrl: renesas: Remove superfluous goto in sh_pfc_gpio_set_direction()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/8] pinctrl: renesas: Optimize sh_pfc_pin_config
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 5/8] pinctrl: renesas: Factor out common R-Car Gen3 bias handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] pinctrl: core: Add missing #ifdef CONFIG_GPIOLIB
  • From: He Zhe <zhe.he@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] rockchip-pinctrl fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 23/33] docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v3] gpio: mockup: Allow probing from device tree
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [RESEND PATCH] pinctrl: qcom: sm8250: Specify PDC map
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 0/3] rockchip-pinctrl fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v1 3/3] Documentation: firmware-guide: gpio-properties: Clarify initial output state
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v1 1/3] Documentation: firmware-guide: gpio-properties: Fix factual mistakes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: qcom: add pinctrl driver for msm8953
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• linusw/fixes baseline: 110 runs, 1 regressions (v5.10-rc1-6-g7ffa08169849)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc1-6-g7ffa08169849)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 6/8] drm: atomic: use krealloc_array()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 5/8] edac: ghes: use krealloc_array()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 1/8] mm: slab: provide krealloc_array()
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH v2] gpio: mockup: Allow probing from device tree
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH 2/8] ALSA: pcm: use krealloc_array()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 8/8] dma-buf: use krealloc_array()
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH 0/8] slab: provide and use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 2/8] ALSA: pcm: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/8] vhost: vringh: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/8] mm: slab: provide krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/8] pinctrl: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 7/8] hwtracing: intel: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 8/8] dma-buf: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 6/8] drm: atomic: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 5/8] edac: ghes: use krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] pinctrl: amd: print debounce filter info in debugfs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] pinctrl: aspeed: Fix GPI only function problem.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: gpio: pca953x: Add support for the NXP PCAL9554B/C
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• RE: [PATCH v2 5/5] dt-bindings: aspeed-lpc: Remove LPC partitioning
  • From: ChiaWei Wang <chiawei_wang@xxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Lakefield pin controller support
  • From: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: Any other ways to debug GPIO interrupt controller (pinctrl-amd) for broken touchpads of a new laptop model?
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v1] pinctrl: intel: Add Intel Lakefield pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: samsung: pinctrl-s3c24xx: remove unneeded break
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] pinctrl/meson: enable building as modules
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: mcp23s08: Use full chunk of memory for regmap configuration
  • From: Jan Kundrát <jan.kundrat@xxxxxxxxx>
• [PATCH v4] dt-bindings: gpio: pca953x: Add support for the NXP PCAL9554B/C
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2 01/10] firmware: raspberrypi: Introduce rpi_firmware_put()
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v2] pinctrl: amd: print debounce filter info in debugfs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• [PATCH v2] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH 7/7] gpio: exar: use devm action for freeing the IDA and drop remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 7/7] gpio: exar: use devm action for freeing the IDA and drop remove()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFT PATCH 6/7] gpio: exar: switch to using regmap
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] gpio: aspeed: fix ast2600 bank properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [RFT PATCH 5/7] gpio: exar: unduplicate address and offset computation
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] gpio: dwapb: Fix missing conversion to GPIO-lib-based IRQ-chip
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 0/7] gpio: exar: refactor the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] gpiolib: split error path in gpiod_request_commit()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 03/10] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] gpiolib: Unify expectations about ->request() returned value
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] gpiolib: of: Use named item for enum gpiod_flags variable
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 03/10] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v6 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] gpiolib: acpi: Respect bias settings for GpioInt() resource
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] gpiolib: of: Use named item for enum gpiod_flags variable
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: gpio: pca953x: Add support for the NXP PCAL9554B/C
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 05/10] soc: bcm: raspberrypi-power: Release firmware handle on unbind
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v2] gpiolib: cdev: document that line eflags are shared
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1] gpiolib: Extract gpiod_not_found() helper
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/7] gpio: exar: add a newline after the copyright notice
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/7] gpio: exar: include idr.h
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/7] gpio: exar: switch to a simpler IDA interface
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/7] gpio: exar: use a helper variable for &pdev->dev
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 7/7] gpio: exar: use devm action for freeing the IDA and drop remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH 5/7] gpio: exar: unduplicate address and offset computation
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH 6/7] gpio: exar: switch to using regmap
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/7] gpio: exar: refactor the driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 10/10] pwm: Add Raspberry Pi Firmware based PWM bus
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V3 2/4] arm64: defconfig: Build in CONFIG_GPIO_MXC by default
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH 2/2] arm64: tegra: Fix DT binding for IO High Voltage entry
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: Fix entry name for I/O High Voltage property
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: aspeed-lpc: Remove LPC partitioning
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Remove LPC register partitioning
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Arm: dts: aspeed-g6: Add sgpio node
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [libgpiod][PATCH] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] pinctrl: amd: print debounce filter info in debugfs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [libgpiod] C++ Bindings ABI Compatibility
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] treewide: rework struct gpiod_line_bulk
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] pinctrl: amd: print debounce filter info in debugfs
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [libgpiod] C++ Bindings ABI Compatibility
  • From: Jack Winch <sunt.un.morcov@xxxxxxxxx>
• Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] dt-bindings: More whitespace clean-ups in schema files
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Request for pre-review of pending MID removal patch series
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Request for pre-review of pending MID removal patch series
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [libgpiod] cxx bindings: time_point vs duration
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] treewide: rework struct gpiod_line_bulk
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>