Re: [PATCH 17/32] dt-bindings: Define Kendryte K210 reset signals

[Sean Anderson <seanga2@xxxxxxxxx>]

On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Introduce the dt-bindings file include/dt-bindings/reset/k210_sysctl.h
> to define IDs for all 30 reset signals available on the Kendryte K210
> RISC-V SoC.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
> ---
>  include/dt-bindings/reset/k210-rst.h | 42 ++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 include/dt-bindings/reset/k210-rst.h
> 
> diff --git a/include/dt-bindings/reset/k210-rst.h b/include/dt-bindings/reset/k210-rst.h
> new file mode 100644
> index 000000000000..883c1aed50e8
> --- /dev/null
> +++ b/include/dt-bindings/reset/k210-rst.h
> @@ -0,0 +1,42 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2019 Sean Anderson <seanga2@xxxxxxxxx>
> + * Copyright (c) 2020 Western Digital Corporation or its affiliates.
> + */
> +#ifndef RESET_K210_SYSCTL_H
> +#define RESET_K210_SYSCTL_H
> +
> +/*
> + * Kendryte K210 SoC system controller K210_SYSCTL_SOFT_RESET register bits.
> + * Taken from Kendryte SDK (kendryte-standalone-sdk).
> + */
> +#define K210_RST_ROM	0
> +#define K210_RST_DMA	1
> +#define K210_RST_AI	2
> +#define K210_RST_DVP	3
> +#define K210_RST_FFT	4
> +#define K210_RST_GPIO	5
> +#define K210_RST_SPI0	6
> +#define K210_RST_SPI1	7
> +#define K210_RST_SPI2	8
> +#define K210_RST_SPI3	9
> +#define K210_RST_I2S0	10
> +#define K210_RST_I2S1	11
> +#define K210_RST_I2S2	12
> +#define K210_RST_I2C0	13
> +#define K210_RST_I2C1	14
> +#define K210_RST_I2C2	15
> +#define K210_RST_UART1	16
> +#define K210_RST_UART2	17
> +#define K210_RST_UART3	18
> +#define K210_RST_AES	19
> +#define K210_RST_FPIOA	20
> +#define K210_RST_TIMER0	21
> +#define K210_RST_TIMER1	22
> +#define K210_RST_TIMER2	23
> +#define K210_RST_WDT0	24
> +#define K210_RST_WDT1	25
> +#define K210_RST_SHA	26
> +#define K210_RST_RTC	29
> +
> +#endif /* RESET_K210_SYSCTL_H */
> 

Reviewed-by: Sean Anderson <seanga2@xxxxxxxxx>