Re: [PATCH 19/32] riscv: Add Kendryte K210 SoC reset controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Add a reset controller driver for the Kendryte K210 SoC. This driver
> relies on its syscon compatible parent node for its register mapping.
> Automatically select this driver for compilation when the SOC_KENDRYTE
> option is selected.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
> ---
>  arch/riscv/Kconfig.socs    |   3 +
>  drivers/reset/Kconfig      |   9 ++
>  drivers/reset/Makefile     |   1 +
>  drivers/reset/reset-k210.c | 186 +++++++++++++++++++++++++++++++++++++
>  4 files changed, 199 insertions(+)
>  create mode 100644 drivers/reset/reset-k210.c
> 
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index a4c851ffc6b0..4d8e66d0556a 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -31,6 +31,9 @@ config SOC_KENDRYTE
>  	select SIFIVE_PLIC
>  	select SOC_K210
>  	select CLK_K210
> +	select ARCH_HAS_RESET_CONTROLLER
> +	select RESET_CONTROLLER
> +	select RESET_K210
>  	help
>  	  This enables support for Kendryte K210 SoC platform hardware.
>  
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 07d162b179fc..c943051b5fc8 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -245,6 +245,15 @@ config RESET_ZYNQ
>  	help
>  	  This enables the reset controller driver for Xilinx Zynq SoCs.
>  
> +config RESET_K210
> +	bool "Reset controller driver for Kendryte K210 SoC"
> +	depends on RISCV && SOC_KENDRYTE
> +	depends on OF && MFD_SYSCON
> +	help
> +	  Support for the Kendryte K210 RISC-V SoC reset controller. If
> +          Say Y if you want to control reset signals provided by this
> +	  controller.
> +
>  source "drivers/reset/sti/Kconfig"
>  source "drivers/reset/hisilicon/Kconfig"
>  source "drivers/reset/tegra/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 16947610cc3b..1730a31e6871 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -33,4 +33,5 @@ obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
>  obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
>  obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
>  obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o
> +obj-$(CONFIG_RESET_K210) += reset-k210.o
>  
> diff --git a/drivers/reset/reset-k210.c b/drivers/reset/reset-k210.c
> new file mode 100644
> index 000000000000..b6401aef2923
> --- /dev/null
> +++ b/drivers/reset/reset-k210.c
> @@ -0,0 +1,186 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2020 Western Digital Corporation or its affiliates.
> + */
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/mfd/k210-sysctl.h>
> +#include <dt-bindings/reset/k210-rst.h>
> +
> +struct k210_rst {
> +	struct regmap *map;
> +	u32 offset;
> +	u32 mask;
> +	u32 assert_high;
> +	struct reset_controller_dev rcdev;
> +};
> +
> +static inline struct k210_rst *
> +to_k210_rst(struct reset_controller_dev *rcdev)
> +{
> +	return container_of(rcdev, struct k210_rst, rcdev);
> +}
> +
> +static inline int k210_rst_assert(struct reset_controller_dev *rcdev,
> +				  unsigned long id)
> +{
> +	struct k210_rst *ksr = to_k210_rst(rcdev);
> +	u32 bit = BIT(id);
> +
> +	if (!(bit & ksr->mask)) {
> +		dev_err(rcdev->dev, "Invalid assert id %lu\n", id);
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(rcdev->dev, "assert %s %lu\n",
> +		ksr->assert_high ? "high" : "low", id);
> +
> +	regmap_update_bits(ksr->map, ksr->offset, bit,
> +			   ksr->assert_high ? bit : 0);
> +
> +	return 0;
> +}
> +
> +static inline int k210_rst_deassert(struct reset_controller_dev *rcdev,
> +				    unsigned long id)
> +{
> +	struct k210_rst *ksr = to_k210_rst(rcdev);
> +	u32 bit = BIT(id);
> +
> +	if (!(bit & ksr->mask)) {
> +		dev_err(rcdev->dev, "Invalid deassert id %lu\n", id);
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(rcdev->dev, "deassert %s %lu\n",
> +		ksr->assert_high ? "high" : "low", id);
> +
> +	regmap_update_bits(ksr->map, ksr->offset, bit,
> +			   ksr->assert_high ? 0 : bit);
> +
> +	return 0;
> +}
> +
> +static int k210_rst_reset(struct reset_controller_dev *rcdev,
> +			  unsigned long id)
> +{
> +	struct k210_rst *ksr = to_k210_rst(rcdev);
> +	int ret;
> +
> +	dev_dbg(rcdev->dev, "reset %s %lu\n",
> +		ksr->assert_high ? "high" : "low", id);
> +
> +	ret = k210_rst_assert(rcdev, id);
> +	if (ret == 0) {
> +		udelay(10);
> +		ret = k210_rst_deassert(rcdev, id);
> +	}
> +
> +	return ret;
> +}
> +
> +static int k210_rst_status(struct reset_controller_dev *rcdev,
> +			   unsigned long id)
> +{
> +	struct k210_rst *ksr = to_k210_rst(rcdev);
> +	u32 reg, bit = BIT(id);
> +	int ret;
> +
> +	if (!(bit & ksr->mask)) {
> +		dev_err(rcdev->dev, "Invalid reset %lx\n", id);
> +		return -EINVAL;
> +	}
> +
> +	ret = regmap_read(ksr->map, ksr->offset, &reg);
> +	if (ret)
> +		return ret;
> +
> +	if (ksr->assert_high)
> +		return ret & bit;
> +
> +	return !(ret & bit);
> +}
> +
> +static const struct reset_control_ops k210_rst_ops = {
> +	.assert		= k210_rst_assert,
> +	.deassert	= k210_rst_deassert,
> +	.reset		= k210_rst_reset,
> +	.status		= k210_rst_status,
> +};
> +
> +static int __init k210_rst_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct k210_rst *ksr;
> +	int ret, nr_resets;
> +
> +	dev_info(dev, "K210 reset controller\n");
> +
> +	ksr = devm_kzalloc(dev, sizeof(*ksr), GFP_KERNEL);
> +	if (!ksr)
> +		return -ENOMEM;
> +
> +	ksr->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
> +	if (IS_ERR(ksr->map)) {
> +		ksr->map = syscon_node_to_regmap(dev->parent->of_node);
> +		if (IS_ERR(ksr->map)) {
> +			dev_err(dev, "get register map failed\n");
> +			return PTR_ERR(ksr->map);
> +		}
> +	}
> +
> +	ret = of_property_read_u32(dev->of_node, "offset", &ksr->offset);
> +	ret = of_property_read_u32(dev->of_node, "assert-high",
> +				   &ksr->assert_high);
> +	if (ret) {
> +		dev_err(dev, "unable to read 'offset' and 'assert-high'\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = of_property_read_u32(dev->of_node, "mask", &ksr->mask);
> +	if (ret) {
> +		/* Use default mask */
> +		ksr->mask = 0x27FFFFFF;
> +	}
> +	nr_resets = fls(ksr->mask);
> +	if (!nr_resets) {
> +		dev_err(dev, "Invalid mask 0x%08x\n", ksr->mask);
> +		return -EINVAL;
> +	}
> +
> +	ksr->rcdev.owner = THIS_MODULE;
> +	ksr->rcdev.dev = dev;
> +	ksr->rcdev.of_node = dev->of_node;
> +	ksr->rcdev.nr_resets = nr_resets;
> +	ksr->rcdev.ops = &k210_rst_ops;
> +
> +	return devm_reset_controller_register(dev, &ksr->rcdev);
> +}
> +
> +static const struct of_device_id k210_rst_dt_ids[] = {
> +	{ .compatible = "kendryte,k210-rst" },
> +};
> +
> +static struct platform_driver k210_rst_driver = {
> +	.probe	= k210_rst_probe,
> +	.driver = {
> +		.name		= "k210-rst",
> +		.of_match_table	= k210_rst_dt_ids,
> +	},
> +};
> +
> +/*
> + * Most devices on the K210 SoC need reset as part of their initialization.
> + * So initialize this driver early as part of the post core initialization.
> + */
> +static int __init k210_rst_init(void)
> +{
> +	return platform_driver_register(&k210_rst_driver);
> +}
> +postcore_initcall(k210_rst_init);
> 

Reviewed-by: Sean Anderson <seanga2@xxxxxxxxx>



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux