Linux Device Driver Development
[Prev Page][Next Page]
- [PATCH v2 04/10] staging: ks7010: change local variable type in ks7010_rw_function, (continued)
- [PATCH 00/10] staging: ks7010: minor cleanups,
Sergio Paracuellos
- [PATCH 01/10] staging: ks7010: remove missing WPS preprocessor conditional code, Sergio Paracuellos
- [PATCH 03/10] staging: ks7010: change local variable type in _ks_wlan_hw_power_save, Sergio Paracuellos
- [PATCH 02/10] staging: ks7010: use u8 instead of unsigned char in write_to_device function, Sergio Paracuellos
- [PATCH 05/10] staging: ks7010: change some local variables type in ks_sdio_interrupt, Sergio Paracuellos
- [PATCH 06/10] staging: ks7010: change local variable type in ks7010_sdio_init_irqs, Sergio Paracuellos
- [PATCH 04/10] staging: ks7010: change local variable type in ks7010_rw_function, Sergio Paracuellos
- [PATCH 08/10] staging: ks7010: refactor ks7010_sme_enqueue_events function, Sergio Paracuellos
- [PATCH 09/10] staging: ks7010: change local variable type in ks_wlan_hw_rx, Sergio Paracuellos
- [PATCH 07/10] staging: ks7010: use the same parameter for 'event' in hostif_sme_enqueue, Sergio Paracuellos
- [PATCH 10/10] staging: ks7010: remove nonsense comments in ks_wlan.h file, Sergio Paracuellos
- [v2, 1/3] staging: fsl-dpaa2/eth: Add support for hardware timestamping,
Yangbo Lu
- [PATCH 0/4] staging: ks7010: next cleanups,
Sergio Paracuellos
- [PATCH 0/5] X86: Hyper-V: APIC enlightenments,
kys
- Re: [PATCH v3 2/5] efi: Add embedded peripheral firmware support,
Luis R. Rodriguez
- [PATCH v2 00/21] staging: wilc1000: remove unused code and reorder functions,
Ajay Singh
- [PATCH v2 01/21] staging: wilc1000: replace crc7_byte() with inline macro CRC7_BYTE, Ajay Singh
- [PATCH v2 02/21] staging: wilc1000: align the #define in wilc_spi file, Ajay Singh
- [PATCH v2 03/21] staging: wilc1000: remove unnecessary assingment from 'if' conditions, Ajay Singh
- [PATCH v2 04/21] staging: wilc1000: remove 'cmd' variable in wilc_spi functions, Ajay Singh
- [PATCH v2 05/21] staging: wicl1000: removed the unsed variables in wilc_parse_network_info(), Ajay Singh
- [PATCH v2 06/21] staging: wilc1000: remove inner {} in wilc_parse_network_info(), Ajay Singh
- [PATCH v2 07/21] staging: wilc1000: simplified if conditions in spi_data_write(), Ajay Singh
- [PATCH v2 08/21] staging: wilc1000: remove unused variable scan_while_connected, Ajay Singh
- [PATCH v2 09/21] staging: wilc1000: remove unsed typedef wilc_debug_func, Ajay Singh
- [PATCH v2 10/21] staging: wilc1000: remove used #define HIF_SDIO_GPIO_IRQ, Ajay Singh
- [PATCH v2 11/21] staging: wilc1000: remove unused #define related to MAC status, Ajay Singh
- [PATCH v2 12/21] staging: wilc1000: rename mac status macros and moved related #define together, Ajay Singh
- [PATCH v2 13/21] staging: wilc1000: rename WILC_WFI_stats to avoid uppercase, Ajay Singh
- [PATCH v2 14/21] staging: wilc1000: rename num_reg_frame macro to have uppercase in macro name, Ajay Singh
- [PATCH v2 15/21] staging: wilc1000: rename wlan init and deinit function prefixed with wil1000, Ajay Singh
- [PATCH v2 17/21] staging: wilc1000: remove unused enum 'stats_flags', Ajay Singh
- [PATCH v2 16/21] staging: wilc1000: remove unused elements in 'wilc_priv' struct, Ajay Singh
- [PATCH v2 18/21] staging: wilc1000: rename P2P_LISTEN_STATE variable to use lowercase, Ajay Singh
- [PATCH v2 19/21] staging: wilc1000: remove inner block '{}' in handle_remain_on_chan(), Ajay Singh
- [PATCH v2 20/21] staging: wilc1000: change function to static in linux_wlan, Ajay Singh
- [PATCH v2 21/21] staging: wilc1000: reorder functions to avoid forward declaration in linux_wlan, Ajay Singh
- Re: [PATCH v2 00/21] staging: wilc1000: remove unused code and reorder functions, Ajay Singh
- simplify procfs code for seq_file instances V2,
Christoph Hellwig
- [PATCH 01/40] net/can: single_open_net needs to be paired with single_release_net, Christoph Hellwig
- [PATCH 03/40] proc: add a proc_create_reg helper, Christoph Hellwig
- [PATCH 02/40] proc: simplify proc_register calling conventions, Christoph Hellwig
- [PATCH 05/40] proc: introduce proc_create_seq_private, Christoph Hellwig
- [PATCH 07/40] ipv{4,6}/udp{,lite}: simplify proc registration, Christoph Hellwig
- [PATCH 04/40] proc: introduce proc_create_seq{,_data}, Christoph Hellwig
- [PATCH 06/40] proc: introduce proc_create_single{,_data}, Christoph Hellwig
- [PATCH 08/40] ipv{4,6}/tcp: simplify procfs registration, Christoph Hellwig
- [PATCH 10/40] ipv{4, 6}/raw: simplify ѕeq_file code, Christoph Hellwig
- [PATCH 12/40] net/kcm: simplify proc registration, Christoph Hellwig
- [PATCH 09/40] ipv{4,6}/ping: simplify proc file creation, Christoph Hellwig
- [PATCH 14/40] net: move seq_file_single_net to <linux/seq_file_net.h>, Christoph Hellwig
- [PATCH 13/40] netfilter/x_tables: simplify ѕeq_file code, Christoph Hellwig
- [PATCH 11/40] ipv6/flowlabel: simplify pid namespace lookup, Christoph Hellwig
- [PATCH 16/40] proc: introduce proc_create_net_single, Christoph Hellwig
- [PATCH 17/40] acpi/battery: simplify procfs code, Christoph Hellwig
- [PATCH 18/40] sgi-gru: simplify procfs code, Christoph Hellwig
- [PATCH 20/40] sg: simplify procfs code, Christoph Hellwig
- [PATCH 24/40] staging/rtl8192u: simplify procfs code, Christoph Hellwig
- [PATCH 19/40] megaraid: simplify procfs code, Christoph Hellwig
- [PATCH 21/40] afs: simplify procfs code, Christoph Hellwig
- [PATCH 15/40] proc: introduce proc_create_net{,_data}, Christoph Hellwig
- [PATCH 28/40] bonding: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 23/40] jfs: simplify procfs code, Christoph Hellwig
- [PATCH 22/40] ext4: simplify procfs code, Christoph Hellwig
- [PATCH 25/40] resource: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 26/40] drbd: switch to proc_create_single, Christoph Hellwig
- [PATCH 30/40] neigh: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 29/40] hostap: switch to proc_create_{seq,single}_data, Christoph Hellwig
- [PATCH 27/40] rtc/proc: switch to proc_create_single_data, Christoph Hellwig
- [PATCH 32/40] netfilter/x_tables: switch to proc_create_seq_private, Christoph Hellwig
- [PATCH 31/40] netfilter/xt_hashlimit: switch to proc_create_{seq, single}_data, Christoph Hellwig
- [PATCH 35/40] atm: switch to proc_create_seq_private, Christoph Hellwig
- [PATCH 33/40] bluetooth: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 34/40] atm: simplify procfs code, Christoph Hellwig
- [PATCH 37/40] proc: don't detour through seq->private to get the inode, Christoph Hellwig
- [PATCH 38/40] ide: remove ide_driver_proc_write, Christoph Hellwig
- [PATCH 36/40] isdn: replace ->proc_fops with ->proc_show, Christoph Hellwig
- [PATCH 40/40] tty: replace ->proc_fops with ->proc_show, Christoph Hellwig
- [PATCH 39/40] ide: replace ->proc_fops with ->proc_show, Christoph Hellwig
- Re: [PATCH 04/40] proc: introduce proc_create_seq{,_data}, David Howells
- Re: simplify procfs code for seq_file instances V2, David Howells
- Re: simplify procfs code for seq_file instances V2, Alexey Dobriyan
- [PATCH 00/16] staging: ks7010: next cleanups,
Sergio Paracuellos
- [PATCH 01/16] staging: ks7010: add SPDX identifiers to all files, Sergio Paracuellos
- [PATCH 02/16] staging: ks7010: refactor ks_wlan_set_beacon_lost function, Sergio Paracuellos
- [PATCH 03/16] staging: ks7010: refactor ks_wlan_set_scan_type function, Sergio Paracuellos
- [PATCH 04/16] staging: ks7010: refactor ks_wlan_set_power_mgmt function, Sergio Paracuellos
- [PATCH 05/16] staging: ks7010: refactor ks_wlan_set_preamble function, Sergio Paracuellos
- [PATCH 08/16] staging: ks7010: use ether_addr_copy in ks_wlan_set_encode_ext, Sergio Paracuellos
- [PATCH 07/16] staging: ks7010: refactor ks_wlan_set_pmksa function, Sergio Paracuellos
- [PATCH 06/16] staging: ks7010: refactor ks_wlan_set_cts_mode function, Sergio Paracuellos
- [PATCH 09/16] staging: ks7010: align values in frequency_list array, Sergio Paracuellos
- [PATCH 10/16] staging: ks7010: refactor ks_wlan_set_wap function, Sergio Paracuellos
- [PATCH 11/16] staging: ks7010: use ether_addr_copy in ks_wlan_get_wap, Sergio Paracuellos
- [PATCH 12/16] staging: ks7010: avoid an 'else' in ks_wlan_set_power, Sergio Paracuellos
- [PATCH 13/16] staging: ks7010: avoid if-else condition in ks_wlan_get_power, Sergio Paracuellos
- [PATCH 14/16] staging: ks7010: use ether_addr_copy in ks_wlan_get_aplist, Sergio Paracuellos
- [PATCH 15/16] staging: ks7010: avoid blank line between declarations in ks_wlan_get_aplist, Sergio Paracuellos
- [PATCH 16/16] staging: ks7010: refactor ks_wlan_translate_scan function, Sergio Paracuellos
- [PATCH 1/2] staging: gdm724x: add SPDX identifiers to all files.,
Greg Kroah-Hartman
- [PATCH 4.14 102/183] x86/hyperv: Check for required priviliges in hyperv_init(), Greg Kroah-Hartman
- [PATCH 4.14 087/183] x86/hyperv: Stop suppressing X86_FEATURE_PCID, Greg Kroah-Hartman
- [PATCH] staging: fsl-dpaa2/eth: Add support for hardware timestamping,
Yangbo Lu
- [PATCH] staging: mt7621-mmc: Fix calculation typo in msdc_init_gpd_bd,
Christian Lütke-Stetzkamp
- [PATCH] ion: Consider ion pool pages as indirectly reclaimable,
vjitta
- [PATCH 0/8] staging: mt7621-mmc: remaining patches from previous series,
Christian Lütke-Stetzkamp
- [PATCH 0/2] staging: wilc1000: TODO list updates,
Ajay Singh
- Patch "x86/hyperv: Check for required priviliges in hyperv_init()" has been added to the 4.14-stable tree, gregkh
- Patch "x86/hyperv: Stop suppressing X86_FEATURE_PCID" has been added to the 4.14-stable tree, gregkh
- [PATCH 00/18] staging: ks7010: Next cleanups,
Sergio Paracuellos
- [PATCH 01/18] staging: ks7010: avoid some if-else code in get_current_ap function, Sergio Paracuellos
- [PATCH 02/18] staging: ks7010: join some debug traces in get_current_ap function, Sergio Paracuellos
- [PATCH 03/18] staging: ks7010: use definitions from kernel headers in hostif_data_indication function, Sergio Paracuellos
- [PATCH 04/18] staging: ks7010: refactor hostif_sme_power_mgmt_set function, Sergio Paracuellos
- [PATCH 05/18] staging: ks7010: avoid use of brackets in single line if, Sergio Paracuellos
- [PATCH 06/18] staging: ks7010: use GPL-2.0+ SPDX license identifier, Sergio Paracuellos
- [PATCH 07/18] staging: ks7010: remove some duplicated definitions in ks_wlan_net.c, Sergio Paracuellos
- [PATCH 09/18] staging: ks7010: refactor ks_wlan_get_mode function, Sergio Paracuellos
- [PATCH 08/18] staging: ks7010: refactor ks_wlan_set_mode function, Sergio Paracuellos
- [PATCH 10/18] staging: ks7010: fix line exceding 80 characters in ks_wlan_get_range, Sergio Paracuellos
- [PATCH 11/18] staging: ks7010: remove WPS definition conditional code, Sergio Paracuellos
- [PATCH 12/18] staging: ks7010: remove duplicated ks_wlan_handler_def declaration, Sergio Paracuellos
- [PATCH 15/18] staging: ks7010: use ether_addr_equal in hostif_data_indication, Sergio Paracuellos
- [PATCH 14/18] staging: ks7010: use ether_addr_copy in hostif_mib_get_confirm, Sergio Paracuellos
- [PATCH 16/18] staging: ks7010: use ether_addr_equal in hostif_data_request, Sergio Paracuellos
- [PATCH 13/18] staging: ks7010: use ether_addr_copy() instead of custom copy, Sergio Paracuellos
- [PATCH 17/18] staging: ks7010: use ether_addr_copy in hostif_sme_multicast_set, Sergio Paracuellos
- [PATCH 18/18] staging: ks7010: refactor hostif_sme_set_pmksa function, Sergio Paracuellos
- [PATCH] staging/wilc1000: fix wilc_mac_xmit()'s return type,
Luc Van Oostenryck
- [PATCH] staging: wlan-ng: fix p80211knetdev_hard_start_xmit()'s return type, Luc Van Oostenryck
- [PATCH] staging: visornic: fix visornic_xmit()'s return type, Luc Van Oostenryck
- [PATCH] staging: rtl8723bs: fix rtw_cfg80211_monitor_if_xmit_entry()'s return type,
Luc Van Oostenryck
- [PATCH] staging: ks7010: fix ks_wlan_start_xmit()'s return type,
Luc Van Oostenryck
- [PATCH] staging: gdm724x: fix gdm_lte_tx()'s return type, Luc Van Oostenryck
- [PATCH] hv_netsvc: fix netvsc_start_xmit()'s return type, Luc Van Oostenryck
- [PATCH] vboxvideo: fix mode_valid's return type,
Luc Van Oostenryck
- [PATCH RESEND] staging: pi433: break long lines in pi433_if.c, Simon Sandström
- [RESEND 00/33] staging: wilc1000: code cleanup and checkpatch fixes,
Ajay Singh
- [RESEND 01/33] staging: wilc1000: refactor scan() to free kmalloc memory on failure cases, Ajay Singh
- [RESEND 02/33] staging: wilc1000: removed unused static variables for gtk and ptk information, Ajay Singh
- [RESEND 03/33] staging: wilc1000: remove line over 80 char warnings in set_wiphy_params(), Ajay Singh
- [RESEND 04/33] staging: wilc1000: refactor WILC_WFI_p2p_rx() to avoid line over 80 char, Ajay Singh
- [RESEND 06/33] staging: wilc1000: refactor mgmt_tx to fix line over 80 chars, Ajay Singh
- [RESEND 05/33] staging: wilc1000: rename WILC_WFI_p2p_rx & s32Freq to avoid camelCase, Ajay Singh
- [RESEND 07/33] staging: wilc1000: rename hAgingTimer to avoid camelCase issue, Ajay Singh
- [RESEND 08/33] staging: wilc1000: fix line over 80 char issue in clear_shadow_scan(), Ajay Singh
- [RESEND 09/33] staging: wilc1000: remove line over 80 char in cfg_connect_result(), Ajay Singh
- [RESEND 11/33] staging: wilc1000: remove line over 80 char warning in few functions, Ajay Singh
- [RESEND 12/33] staging: wilc1000: rename WILC_WFI_wep_key & WILC_WFI_wep_key_len, Ajay Singh
- [RESEND 10/33] staging: wilc1000: remove unused 'struct add_key_params', Ajay Singh
- [RESEND 15/33] staging: wilc1000: remove inner block {} and resetting of mode variable, Ajay Singh
- [RESEND 13/33] staging: wilc1000: rename variable using datatype in their name in add_key(), Ajay Singh
- [RESEND 14/33] staging: wilc1000: split add_key() to avoid line over 80 chars, Ajay Singh
- [RESEND 16/33] staging: wilc1000: refactor add_key() to avoid duplicated code, Ajay Singh
- [RESEND 18/33] staging: wilc1000: use sizeof(variable) for memory allocated to store key info, Ajay Singh
- [RESEND 20/33] staging: wilc1000: rename WID_LOGTerminal_Switch to avoid camelCase, Ajay Singh
- [RESEND 22/33] staging: wilc1000: remove unused macros in wilc module, Ajay Singh
- [RESEND 24/33] staging: wilc1000: remove multiple define for mac connect and disconnect, Ajay Singh
- [RESEND 17/33] staging: wilc1000: handle error condition in add_key() and remove auth_type variable, Ajay Singh
- [RESEND 26/33] staging: wilc1000: remove the use of goto label in wilc_spi_read_size(), Ajay Singh
- [RESEND 23/33] staging: wilc1000: remove multiple define used for MAX_SSID_LEN, Ajay Singh
- [RESEND 21/33] staging: wilc1000: added identifiers name in function definations, Ajay Singh
- [RESEND 19/33] staging: wilc1000: fix line over 80 chars in change_station(), Ajay Singh
- [RESEND 27/33] staging: wilc1000: remove the use of goto label in wilc_spi_read_int(), Ajay Singh
- [RESEND 25/33] staging: wilc1000: remove the use of goto label in spi_cmd_complete(), Ajay Singh
- [RESEND 28/33] staging: wilc1000: remove goto label '_done_' in handle_listen_state_expired(), Ajay Singh
- [RESEND 29/33] staging: wilc1000: remove the use of goto label in wilc_init(), Ajay Singh
- [RESEND 31/33] staging: wilc1000: rename goto labels starting with '_' in wilc1000_wlan_init(), Ajay Singh
- [RESEND 30/33] staging: wilc1000: rename goto label '_fail_' linux naming convension, Ajay Singh
- [RESEND 32/33] staging: wilc1000: remove the use of goto label in wilc_spi_clear_int_ext(), Ajay Singh
- [RESEND 33/33] staging: wilc1000: rename pu32InactiveTime to avoid camelCase issue, Ajay Singh
- [PATCH v2] android: binder: Change return type to vm_fault_t, Souptick Joarder
- [PATCH] Revert "staging: nvec: Augment TODO file with GPIO work item", Marc Dietrich
- [PATCH v2 00/15] media: staging/imx7: add i.MX7 media driver,
Rui Miguel Silva
- [PATCH v2 01/15] media: staging/imx: add support to media dev for no IPU systems, Rui Miguel Silva
- [PATCH v2 02/15] media: staging/imx7: add imx7 CSI subdev driver, Rui Miguel Silva
- [PATCH v2 03/15] clk: imx7d: fix mipi dphy div parent, Rui Miguel Silva
- [PATCH v2 04/15] clk: imx7d: reset parent for mipi csi root, Rui Miguel Silva
- [PATCH v2 05/15] media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7, Rui Miguel Silva
- [PATCH v2 06/15] media: staging/imx: add imx7 capture subsystem, Rui Miguel Silva
- [PATCH v2 07/15] ARM: dts: increase default cma size to 40MB, Rui Miguel Silva
- [PATCH v2 08/15] media: dt-bindings: add bindings for i.MX7 media driver, Rui Miguel Silva
- [PATCH v2 09/15] ARM: dts: imx7s: add mipi phy power domain, Rui Miguel Silva
- [PATCH v2 10/15] ARM: dts: imx7s: add multiplexer controls, Rui Miguel Silva
- [PATCH v2 11/15] ARM: dts: imx7: Add video mux, csi and mipi_csi and connections, Rui Miguel Silva
- [PATCH v2 12/15] ARM: dts: imx7s: add capture subsystem, Rui Miguel Silva
- [PATCH v2 14/15] media: imx7.rst: add documentation for i.MX7 media driver, Rui Miguel Silva
- [PATCH v2 13/15] ARM: dts: imx7s-warp: add ov2680 sensor node, Rui Miguel Silva
- [PATCH v2 15/15] media: staging/imx: add i.MX7 entries to TODO file, Rui Miguel Silva
- [PATCH 00/24] staging: ks7010: remaining cleanups from previous series,
Sergio Paracuellos
- [PATCH 03/24] staging: ks7010: move sdio specific register definitions into source file, Sergio Paracuellos
- [PATCH 01/24] staging: ks7010: avoid casts in michael_mic_function calls, Sergio Paracuellos
- [PATCH 02/24] staging: ks7010: move ROM_FILE definition into source file, Sergio Paracuellos
- [PATCH 04/24] staging: ks7010: delete not used definitions in ks7010_sdio source, Sergio Paracuellos
- [PATCH 05/24] staging: ks7010: add REG suffix to sdio register definitions, Sergio Paracuellos
- [PATCH 06/24] staging: ks7010: review comment style in ks7010_sdio source file, Sergio Paracuellos
- [PATCH 07/24] staging: ks7010: review debug and error messages in ks7010_sdio source, Sergio Paracuellos
- [PATCH 09/24] staging: ks7010: move MODULE_DEVICE_TABLE related code, Sergio Paracuellos
- [PATCH 08/24] staging: ks7010: avoid one extra level indentation in ks_wlan_hw_rx function, Sergio Paracuellos
- [PATCH 10/24] staging: ks7010: replace create_workqueue with alloc_workqueue, Sergio Paracuellos
- [PATCH 11/24] staging: ks7010: check sdio_set_block_size return value, Sergio Paracuellos
- [PATCH 12/24] staging: ks7010: fix error paths in ks7010_sdio_remove function, Sergio Paracuellos
- [PATCH 18/24] staging: ks7010: fix warning aout long line in init_request, Sergio Paracuellos
- [PATCH 13/24] staging: ks7010: use u8 instead of unsigned char for firmware buffers, Sergio Paracuellos
- [PATCH 15/24] staging: ks7010: change name and type for device_open_status field, Sergio Paracuellos
- [PATCH 16/24] staging: ks7010: avoid one level indentation in devio_rec_ind function, Sergio Paracuellos
- [PATCH 14/24] staging: ks7010: assign dev_alloc_name() result to variable before check it, Sergio Paracuellos
- [PATCH 19/24] staging: ks7010: avoid blank line between definitions in hostif_data_request, Sergio Paracuellos
- [PATCH 20/24] staging: ks7010: remove two fields of ks_wlan_private struct, Sergio Paracuellos
- [PATCH 17/24] staging: ks7010: remove superfluous comments in ks_hostif source file, Sergio Paracuellos
- [PATCH 22/24] staging: ks7010: review includes of ks_hostif file, Sergio Paracuellos
- [PATCH 21/24] staging: ks7010: removes data_buff field of ks_wlan_private struct, Sergio Paracuellos
- [PATCH 24/24] staging: ks7010: remove KSC_OPNOTSUPP related code, Sergio Paracuellos
- [PATCH 23/24] staging: ks7010: use IW_HANDLER macro in ks_wlan_handler, Sergio Paracuellos
- [v3, 1/2] staging: fsl-dpaa2/rtc: add rtc driver,
Yangbo Lu
- [PATCH v3 0/9] staging: iio: ad2s1200: Driver clean up,
David Veenstra
- [PATCH] staging: lustre: Change return type to vm_fault_t,
Souptick Joarder
- [PATCH 0/3] stagging:iio:meter: Add essential IIO API structures for ADE7854,
Rodrigo Siqueira
- [PATCH] staging: android: ion: remove duplicate buffer field initializes,
Todd Poynor
- [PATCH 00/13] iio: tsl2x7x: staging cleanups,
Brian Masney
- [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier, Brian Masney
- [PATCH 03/13] staging: iio: tsl2x7x: don't return error in IRQ handler, Brian Masney
- [PATCH 01/13] staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel, Brian Masney
- [PATCH 04/13] staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function, Brian Masney
- [PATCH 05/13] staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume, Brian Masney
- [PATCH 06/13] staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return, Brian Masney
- [PATCH 08/13] staging: iio: tsl2x7x: add range checking to three sysfs attributes, Brian Masney
- [PATCH 07/13] staging: iio: tsl2x7x: simplify device id verification, Brian Masney
- [PATCH 11/13] staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time, Brian Masney
- [PATCH 09/13] staging: iio: tsl2x7x: move power and diode settings into header file, Brian Masney
- [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency, Brian Masney
- [PATCH 12/13] staging: iio: tsl2x7x: various comment cleanups, Brian Masney
- [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config, Brian Masney
- [PATCH v2 00/13] staging: iio: ad2s1200: Driver clean up,
David Veenstra
- [PATCH v2 01/13] staging: iio: ad2s1200: Remove unneeded include, David Veenstra
- [PATCH v2 02/13] staging: iio: ad2s1200: Sort includes alphabetically, David Veenstra
- [PATCH v2 03/13] staging: iio: ad2s1200: Reverse Christmas tree ordering, David Veenstra
- [PATCH v2 04/13] staging: iio: ad2s1200: Add blank lines, David Veenstra
- [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state, David Veenstra
- [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value, David Veenstra
- [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup, David Veenstra
- [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API, David Veenstra
- [PATCH v2 09/13] staging: iio: ad2s1200: Add documentation for device tree binding, David Veenstra
- [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel, David Veenstra
- [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel, David Veenstra
- [PATCH v2 12/13] staging: iio: ad2s1200: Add scaling factor for angle channel, David Veenstra
- [PATCH v2 13/13] staging: iio: ad2s1200: Move driver out of staging, David Veenstra
- [PATCH 0/8] arm: renesas: Change platform dependency to ARCH_RENESAS,
Geert Uytterhoeven
- [PATCH/RFC 7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol, Geert Uytterhoeven
- [PATCH 3/8] [media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS, Geert Uytterhoeven
- [PATCH 1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS, Geert Uytterhoeven
- [PATCH 2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS, Geert Uytterhoeven
- [PATCH/RFC 8/8] arm64: renesas: Remove the ARCH_SHMOBILE Kconfig symbol, Geert Uytterhoeven
- [PATCH 5/8] staging: emxx_udc: Change platform dependency to ARCH_RENESAS, Geert Uytterhoeven
- [PATCH 6/8] ASoC: sh: Update menu title and platform dependency, Geert Uytterhoeven
- [PATCH 4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS, Geert Uytterhoeven
- Re: [PATCH 0/8] arm: renesas: Change platform dependency to ARCH_RENESAS, Arnd Bergmann
- Re: [PATCH 0/8] arm: renesas: Change platform dependency to ARCH_RENESAS, Mark Brown
- [PATCH] media: davinci_vpfe: fix some potential overflows, Dan Carpenter
- [v2, 1/2] staging: fsl-dpaa2/rtc: add rtc driver,
Yangbo Lu
- [Patch v2] Storvsc: Select channel based on available percentage of ring buffer to write,
Long Li
- [PATCH 00/61] tree-wide: simplify getting .drvdata,
Wolfram Sang
- simplify procfs code for seq_file instances,
Christoph Hellwig
- Re: [PATCH 20/39] afs: simplify procfs code, David Howells
- [PATCH 20/39] afs: simplify procfs code, Christoph Hellwig
- [PATCH 09/39] ipv6/flowlabel: simplify pid namespace lookup, Christoph Hellwig
- [PATCH 10/39] net/kcm: simplify proc registration, Christoph Hellwig
- [PATCH 06/39] ipv{4,6}/tcp: simplify procfs registration, Christoph Hellwig
- [PATCH 01/39] net/can: single_open_net needs to be paired with single_release_net, Christoph Hellwig
- [PATCH 08/39] ipv{4, 6}/raw: simplify ѕeq_file code, Christoph Hellwig
- [PATCH 03/39] proc: introduce proc_create_seq_private, Christoph Hellwig
- [PATCH 05/39] ipv{4,6}/udp{,lite}: simplify proc registration, Christoph Hellwig
- [PATCH 07/39] ipv{4,6}/ping: simplify proc file creation, Christoph Hellwig
- [PATCH 16/39] ipmi: simplify procfs code, Christoph Hellwig
- [PATCH 11/39] netfilter/x_tables: simplify ѕeq_file code, Christoph Hellwig
- [PATCH 22/39] jfs: simplify procfs code, Christoph Hellwig
- [PATCH 29/39] neigh: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 27/39] bonding: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 14/39] proc: introduce proc_create_net_single, Christoph Hellwig
- [PATCH 33/39] atm: simplify procfs code, Christoph Hellwig
- [PATCH 31/39] netfilter/x_tables: switch to proc_create_seq_private, Christoph Hellwig
- [PATCH 04/39] proc: introduce proc_create_single{,_data}, Christoph Hellwig
- [PATCH 35/39] isdn: replace ->proc_fops with ->proc_show, Christoph Hellwig
- [PATCH 32/39] bluetooth: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 18/39] megaraid: simplify procfs code, Christoph Hellwig
- [PATCH 02/39] proc: introduce proc_create_seq{,_data}, Christoph Hellwig
- [PATCH 15/39] acpi/battery: simplify procfs code, Christoph Hellwig
- [PATCH 39/39] tty: replace ->proc_fops with ->proc_show, Christoph Hellwig
- [PATCH 28/39] hostap: switch to proc_create_{seq,single}_data, Christoph Hellwig
- [PATCH 19/39] sg: simplify procfs code, Christoph Hellwig
- [PATCH 23/39] staging/rtl8192u: simplify procfs code, Christoph Hellwig
- [PATCH 24/39] resource: switch to proc_create_seq_data, Christoph Hellwig
- [PATCH 36/39] proc: don't detour through seq->private to get the inode, Christoph Hellwig
- [PATCH 17/39] sgi-gru: simplify procfs code, Christoph Hellwig
- [PATCH 37/39] ide: remove ide_driver_proc_write, Christoph Hellwig
- [PATCH 34/39] atm: switch to proc_create_seq_private, Christoph Hellwig
- [PATCH 25/39] drbd: switch to proc_create_single, Christoph Hellwig
- [PATCH 30/39] netfilter/xt_hashlimit: switch to proc_create_{seq, single}_data, Christoph Hellwig
- [PATCH 13/39] proc: introduce proc_create_net{,_data}, Christoph Hellwig
- [PATCH 26/39] rtc/proc: switch to proc_create_single_data, Christoph Hellwig
- [PATCH 21/39] ext4: simplify procfs code, Christoph Hellwig
- [PATCH 12/39] net: move seq_file_single_net to <linux/seq_file_net.h>, Christoph Hellwig
- [PATCH 38/39] ide: replace ->proc_fops with ->proc_show, Christoph Hellwig
- Re: simplify procfs code for seq_file instances, Alexey Dobriyan
- [PATCH 1/2] staging: nvec: cleanup use of dev in probe function,
Marc Dietrich
- [PATCH 00/15] media: staging/imx7: add i.MX7 media driver,
Rui Miguel Silva
- [PATCH 07/15] media: staging/imx: add 10 bit bayer support, Rui Miguel Silva
- [PATCH 08/15] ARM: dts: increase default cma size to 40MB, Rui Miguel Silva
- [PATCH 03/15] clk: imx7d: fix mipi dphy div parent, Rui Miguel Silva
- [PATCH 13/15] ARM: dts: imx7s: add capture subsystem, Rui Miguel Silva
- [PATCH 10/15] ARM: dts: imx7s: add mipi phy power domain, Rui Miguel Silva
- [PATCH 06/15] media: staging/imx: add imx7 capture subsystem, Rui Miguel Silva
- [PATCH 15/15] media: staging/imx: add i.MX7 entries to TODO file, Rui Miguel Silva
- [PATCH 04/15] clk: imx7d: reset parent for mipi csi root, Rui Miguel Silva
- [PATCH 05/15] media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7, Rui Miguel Silva
- [PATCH 12/15] ARM: dts: imx7: Add video mux, csi and mipi_csi and connections, Rui Miguel Silva
- [PATCH 01/15] media: staging/imx: add support to media dev for no IPU systems, Rui Miguel Silva
- [PATCH 11/15] ARM: dts: imx7s: add multiplexer controls, Rui Miguel Silva
- [PATCH 02/15] media: staging/imx7: add imx7 CSI subdev driver, Rui Miguel Silva
- [PATCH 09/15] media: dt-bindings: add bindings for i.MX7 media driver, Rui Miguel Silva
- [PATCH 14/15] media: imx7.rst: add documentation for i.MX7 media driver, Rui Miguel Silva
- [PATCH 1/2] staging: fsl-dpaa2/rtc: add rtc driver,
Yangbo Lu
- [PATCH 0/9] staging: Anchor GPIO descriptors,
Linus Walleij
- [PATCH] staging: speakup: separate 80+ chars lines.,
Andrew Jye Shih Chuang
- [PATCH 00/21] next cleanups,
Sergio Paracuellos
- [PATCH 01/21] staging: ks7010: remove struct ieee802_1x_eapol_key, Sergio Paracuellos
- [PATCH 02/21] staging: ks7010: remove not used enum in eap_packet header file, Sergio Paracuellos
- [PATCH 03/21] staging: ks7010: remove auxiliar zeros buffer in ks_wlan_get_encode, Sergio Paracuellos
- [PATCH 04/21] staging: ks7010: refactor ks_wlan_set_encode function, Sergio Paracuellos
- [PATCH 05/21] staging: ks7010: change if-else condition assignment to use ternary operator, Sergio Paracuellos
- [PATCH 07/21] staging: ks7010: refactor ks_wlan_set_tx_gain function, Sergio Paracuellos
- [PATCH 08/21] staging: ks7010: refactor ks_wlan_set_wps_enable function, Sergio Paracuellos
- [PATCH 06/21] staging: ks7010: refactor ks_wlan_set_rx_gain function, Sergio Paracuellos
- [PATCH 10/21] staging: ks7010: review includes of ks_wlan.h file, Sergio Paracuellos
- [PATCH 09/21] staging: ks7010: review includes of ks_wlan_net.c file, Sergio Paracuellos
- [PATCH 11/21] staging: ks7010: remove two fields of ks_wlan_private struct, Sergio Paracuellos
- [PATCH 14/21] staging: ks7010: review includes of ks_hostif file, Sergio Paracuellos
- [PATCH 12/21] staging: ks7010: remove enum from ks_wlan.h header, Sergio Paracuellos
- [PATCH 16/21] staging: ks7010: review includes of michael_mic.c file, Sergio Paracuellos
- [PATCH 13/21] staging: ks7010: removes data_buff field of ks_wlan_private struct, Sergio Paracuellos
- [PATCH 19/21] staging: ks7010: align comments in ks_wlan_private_handler, Sergio Paracuellos
- [PATCH 18/21] staging: ks7010: remove KSC_OPNOTSUPP related code, Sergio Paracuellos
- [PATCH 21/21] staging: ks7010: init local variables when they are declared in ks7010_sdio_probe, Sergio Paracuellos
- [PATCH 17/21] staging: ks7010: use IW_HANDLER macro in ks_wlan_handler, Sergio Paracuellos
- [PATCH 15/21] staging: ks7010: review includes of ks7010_sdio file, Sergio Paracuellos
- [PATCH 20/21] staging: ks7010: use ARRAY_SIZE macro in ks_wlan_handler_def, Sergio Paracuellos
- [PATCH v3 1/3] resource: Use list_head to link sibling resource,
Baoquan He
- [PATCH] staging: mt7621-spi: Remove redundant owner assignment,
Christian Lütke-Stetzkamp
- [PATCH] staging: mt7621-pinctrl: Remove redundant owner assignment,
Christian Lütke-Stetzkamp
- [PATCH] staging: mt7621-pci: Remove redundant owner assignment,
Christian Lütke-Stetzkamp
- [PATCH 00/31] staging: mt7621-mmc: Next cleanups,
Christian Lütke-Stetzkamp
[Index of Archives]
[Linux Driver Backports]
[Linux USB Devel]
[DMA Engine]
[Linux GPIO]
[Linux SPI]
[Linux SCSI]
[Yosemite Forum]
