On Mon, 23 Apr 2018 00:03:16 +0200
David Veenstra <davidjulianveenstra@xxxxxxxxx> wrote:
> The legacy, integer based gpio API is replaced with the modern
> descriptor based API.
>
> Signed-off-by: David Veenstra <davidjulianveenstra@xxxxxxxxx>
This patch is fine, but I'm going to leave it for the next version
as it makes more sense to pick up with the next patch and
that one will change slightly I think due to the requested
change of the gpio names from Rob.
Thanks,
Jonathan
> ---
> Changes in v3:
> - This patch no longer deals with dt bindings. See the next
> patch.
>
> drivers/staging/iio/resolver/ad2s1200.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
> index 998f458dc1bd..e7bfe5aa4c45 100644
> --- a/drivers/staging/iio/resolver/ad2s1200.c
> +++ b/drivers/staging/iio/resolver/ad2s1200.c
> @@ -14,6 +14,7 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/spi/spi.h>
> @@ -45,8 +46,8 @@
> struct ad2s1200_state {
> struct mutex lock;
> struct spi_device *sdev;
> - int sample;
> - int rdvel;
> + struct gpio_desc *sample;
> + struct gpio_desc *rdvel;
> __be16 rx ____cacheline_aligned;
> };
>
> @@ -60,12 +61,12 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
> int ret = 0;
>
> mutex_lock(&st->lock);
> - gpio_set_value(st->sample, 0);
> + gpiod_set_value(st->sample, 0);
>
> /* delay (6 * AD2S1200_TSCLK + 20) nano seconds */
> udelay(1);
> - gpio_set_value(st->sample, 1);
> - gpio_set_value(st->rdvel, !!(chan->type == IIO_ANGL));
> + gpiod_set_value(st->sample, 1);
> + gpiod_set_value(st->rdvel, !!(chan->type == IIO_ANGL));
>
> ret = spi_read(st->sdev, &st->rx, 2);
> if (ret < 0) {
> @@ -135,8 +136,8 @@ static int ad2s1200_probe(struct spi_device *spi)
> st = iio_priv(indio_dev);
> mutex_init(&st->lock);
> st->sdev = spi;
> - st->sample = pins[0];
> - st->rdvel = pins[1];
> + st->sample = gpio_to_desc(pins[0]);
> + st->rdvel = gpio_to_desc(pins[1]);
>
> indio_dev->dev.parent = &spi->dev;
> indio_dev->info = &ad2s1200_info;
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
