Re: [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 20 Apr 2018 20:41:53 -0400
Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:

> The configuration register on the device is represented with the
> prox_config member on the tsl2x7x_settings structure. According to the
> TSL2772 data sheet, this register can hold: 1) the proximity drive
> level, 2) ALS/Proximity long wait, and 3) the ALS gain level. This
> patch renames prox_config to als_prox_config since ALS settings can
> be stored here as well.
> 
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Applied to the togreg branch of iio.git.

So I think I picked up all but 2 where there were minor suggestions.

Looking forward to the final set!

Thanks,

Jonathan

> ---
>  drivers/staging/iio/light/tsl2x7x.c | 7 ++++---
>  drivers/staging/iio/light/tsl2x7x.h | 5 +++--
>  2 files changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index 05c0f3d5fac0..708b2c6bdf4b 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -56,7 +56,7 @@
>  #define TSL2X7X_PRX_MAXTHRESHLO		0X0A
>  #define TSL2X7X_PRX_MAXTHRESHHI		0X0B
>  #define TSL2X7X_PERSISTENCE		0x0C
> -#define TSL2X7X_PRX_CONFIG		0x0D
> +#define TSL2X7X_ALS_PRX_CONFIG		0x0D
>  #define TSL2X7X_PRX_COUNT		0x0E
>  #define TSL2X7X_GAIN			0x0F
>  #define TSL2X7X_NOTUSED			0x10
> @@ -207,7 +207,7 @@ static const struct tsl2x7x_settings tsl2x7x_default_settings = {
>  	.prox_time = 255, /* 2.73 ms */
>  	.prox_gain = 0,
>  	.wait_time = 255,
> -	.prox_config = 0,
> +	.als_prox_config = 0,
>  	.als_gain_trim = 1000,
>  	.als_cal_target = 150,
>  	.als_persistence = 1,
> @@ -594,7 +594,8 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>  	/* Non calculated parameters */
>  	chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prox_time;
>  	chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] = chip->settings.wait_time;
> -	chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] = chip->settings.prox_config;
> +	chip->tsl2x7x_config[TSL2X7X_ALS_PRX_CONFIG] =
> +		chip->settings.als_prox_config;
>  
>  	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] =
>  		(chip->settings.als_thresh_low) & 0xFF;
> diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
> index 85d8fe7a94c8..6e30e71a2127 100644
> --- a/drivers/staging/iio/light/tsl2x7x.h
> +++ b/drivers/staging/iio/light/tsl2x7x.h
> @@ -48,7 +48,8 @@ struct tsl2x7x_lux {
>   *                          increments. Total integration time is
>   *                          (256 - prx_time) * 2.73.
>   *  @prox_gain:             Index into the tsl2x7x_prx_gain array.
> - *  @prox_config:           Prox configuration filters.
> + *  @als_prox_config:       The value of the ALS / Proximity configuration
> + *                          register.
>   *  @als_cal_target:        Known external ALS reading for calibration.
>   *  @als_persistence:       H/W Filters, Number of 'out of limits' ALS readings.
>   *  @als_interrupt_en:      Enable/Disable ALS interrupts
> @@ -73,7 +74,7 @@ struct tsl2x7x_settings {
>  	int wait_time;
>  	int prox_time;
>  	int prox_gain;
> -	int prox_config;
> +	int als_prox_config;
>  	int als_cal_target;
>  	u8 als_persistence;
>  	bool als_interrupt_en;

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux