[PATCH 04/15] clk: imx7d: reset parent for mipi csi root

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To guarantee that we do not get Overflow in image FIFO the outer bandwidth has
to be faster than inputer bandwidth. For that it must be possible to set a
faster frequency clock. So set new parent to sys_pfd3 clock for the mipi csi
block.

Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
---
 drivers/clk/imx/clk-imx7d.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index f7f4db2e6fa6..9a1a18ceb132 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -891,6 +891,9 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(clks[IMX7D_PLL_AUDIO_MAIN_BYPASS], clks[IMX7D_PLL_AUDIO_MAIN]);
 	clk_set_parent(clks[IMX7D_PLL_VIDEO_MAIN_BYPASS], clks[IMX7D_PLL_VIDEO_MAIN]);
 
+	clk_set_parent(clks[IMX7D_MIPI_CSI_ROOT_SRC],
+		       clks[IMX7D_PLL_SYS_PFD3_CLK]);
+
 	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
 	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
 
-- 
2.17.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux