On Mon, 23 Apr 2018 00:03:59 +0200
David Veenstra <davidjulianveenstra@xxxxxxxxx> wrote:
> The sysfs iio ABI states radians per second is expected as the unit for
> angular velocity, but the 12-bit angular velocity register has rps
Really small point, but rps is a bit ambiguous given we are
talking about converting to radian's per second ;)
revs is the 'common' name for what it currently is I think.
Otherwise this looks good.
Jonathan
> as its unit. So a scaling factor of approximately 2 * Pi is
> added to the angular velocity channel.
>
> Signed-off-by: David Veenstra <davidjulianveenstra@xxxxxxxxx>
> ---
> Changes in v3:
> - A decimal approximation of the scale is used, instead
> of a fractional approximation.
> - Remove unneeded explanation of iio_convert_raw_to_processed.
>
> drivers/staging/iio/resolver/ad2s1200.c | 71 +++++++++++++++++++++------------
> 1 file changed, 45 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
> index 3c7163610ff6..3e1696e52c38 100644
> --- a/drivers/staging/iio/resolver/ad2s1200.c
> +++ b/drivers/staging/iio/resolver/ad2s1200.c
> @@ -57,37 +57,55 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
> struct ad2s1200_state *st = iio_priv(indio_dev);
> int ret = 0;
>
> - mutex_lock(&st->lock);
> - gpiod_set_value(st->sample, 0);
> -
> - /* delay (6 * AD2S1200_TSCLK + 20) nano seconds */
> - udelay(1);
> - gpiod_set_value(st->sample, 1);
> - gpiod_set_value(st->rdvel, !!(chan->type == IIO_ANGL));
> -
> - ret = spi_read(st->sdev, &st->rx, 2);
> - if (ret < 0) {
> + switch (m) {
> + case IIO_CHAN_INFO_SCALE:
> + switch (chan->type) {
> + case IIO_ANGL_VEL:
> + /* 2 * Pi ~= 6.283185 */
> + *val = 6;
> + *val2 = 283185;
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case IIO_CHAN_INFO_RAW:
> + mutex_lock(&st->lock);
> + gpiod_set_value(st->sample, 0);
> +
> + /* delay (6 * AD2S1200_TSCLK + 20) nano seconds */
> + udelay(1);
> + gpiod_set_value(st->sample, 1);
> + gpiod_set_value(st->rdvel, !!(chan->type == IIO_ANGL));
> +
> + ret = spi_read(st->sdev, &st->rx, 2);
> + if (ret < 0) {
> + mutex_unlock(&st->lock);
> + return ret;
> + }
> +
> + switch (chan->type) {
> + case IIO_ANGL:
> + *val = be16_to_cpup(&st->rx) >> 4;
> + break;
> + case IIO_ANGL_VEL:
> + *val = sign_extend32(be16_to_cpup(&st->rx) >> 4, 11);
> + break;
> + default:
> + mutex_unlock(&st->lock);
> + return -EINVAL;
> + }
> +
> + /* delay (2 * AD2S1200_TSCLK + 20) ns for sample pulse */
> + udelay(1);
> mutex_unlock(&st->lock);
> - return ret;
> - }
>
> - switch (chan->type) {
> - case IIO_ANGL:
> - *val = be16_to_cpup(&st->rx) >> 4;
> - break;
> - case IIO_ANGL_VEL:
> - *val = sign_extend32(be16_to_cpup(&st->rx) >> 4, 11);
> - break;
> + return IIO_VAL_INT;
> default:
> - mutex_unlock(&st->lock);
> - return -EINVAL;
> + break;
> }
>
> - /* delay (2 * AD2S1200_TSCLK + 20) ns for sample pulse */
> - udelay(1);
> - mutex_unlock(&st->lock);
> -
> - return IIO_VAL_INT;
> + return -EINVAL;
> }
>
> static const struct iio_chan_spec ad2s1200_channels[] = {
> @@ -101,6 +119,7 @@ static const struct iio_chan_spec ad2s1200_channels[] = {
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> }
> };
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
