On Sat, 21 Apr 2018 08:55:52 -0300
Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx> wrote:
> This patch adds the ade7854_read_raw() function which is responsible for
> handling the read operation for registers: AIGAIN, BIGAIN, CIGAIN,
> NIGAIN, AVGAIN, BVGAIN, and CVGAIN. For the sake of simplicity, this
> patch only adds basic manipulation for current and voltage channels.
> Finally, this patch disables the old approach for reading data.
>
> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
Other than the previous mentioned issue with the way the channels are
defined, this is nearly fine.
See inline.
> ---
> drivers/staging/iio/meter/ade7854.c | 41 ++++++++++++++++++++++++-----
> 1 file changed, 34 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
> index 2fbb2570ba54..242ecde75900 100644
> --- a/drivers/staging/iio/meter/ade7854.c
> +++ b/drivers/staging/iio/meter/ade7854.c
> @@ -229,31 +229,31 @@ static int ade7854_reset(struct device *dev)
> }
>
> static IIO_DEV_ATTR_AIGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_AIGAIN);
> static IIO_DEV_ATTR_BIGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_BIGAIN);
> static IIO_DEV_ATTR_CIGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_CIGAIN);
> static IIO_DEV_ATTR_NIGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_NIGAIN);
> static IIO_DEV_ATTR_AVGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_AVGAIN);
> static IIO_DEV_ATTR_BVGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_BVGAIN);
> static IIO_DEV_ATTR_CVGAIN(0644,
> - ade7854_read_24bit,
> + NULL,
> ade7854_write_24bit,
> ADE7854_CVGAIN);
> static IIO_DEV_ATTR_APPARENT_POWER_A_GAIN(0644,
> @@ -471,6 +471,32 @@ static int ade7854_set_irq(struct device *dev, bool enable)
> return st->write_reg(dev, ADE7854_MASK0, irqen, 32);
> }
>
> +static int ade7854_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long mask)
> +{
> + struct ade7854_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + if (mask != IIO_CHAN_INFO_SCALE)
> + return -EINVAL;
Given you specified sampling frequency for the channels in the previous
patch this is a little odd!
> +
> + switch (chan->type) {
> + case IIO_CURRENT:
> + case IIO_VOLTAGE:
> + ret = st->read_reg(&indio_dev->dev, chan->address, val, 24);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> + default:
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> static int ade7854_initial_setup(struct iio_dev *indio_dev)
> {
> int ret;
> @@ -572,6 +598,7 @@ static const struct attribute_group ade7854_attribute_group = {
>
> static const struct iio_info ade7854_info = {
> .attrs = &ade7854_attribute_group,
> + .read_raw = &ade7854_read_raw,
> };
>
> int ade7854_probe(struct iio_dev *indio_dev, struct device *dev)
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
