Re: [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 20 Apr 2018 21:30:19 +0200
David Veenstra <davidjulianveenstra@xxxxxxxxx> wrote:

> Add variable to hold &spi->dev in ad2s1200_probe. This value is repeatedly
> used in ad2s1200_probe.
> 
> Signed-off-by: David Veenstra <davidjulianveenstra@xxxxxxxxx>
No significant gain in readability.   Perhaps even a slight lost I'm
going to say no to this one.

Jonathan

> ---
>  drivers/staging/iio/resolver/ad2s1200.c | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
> index f07aab7e7a35..0a5fc9917e32 100644
> --- a/drivers/staging/iio/resolver/ad2s1200.c
> +++ b/drivers/staging/iio/resolver/ad2s1200.c
> @@ -117,19 +117,22 @@ static int ad2s1200_probe(struct spi_device *spi)
>  	unsigned short *pins = spi->dev.platform_data;
>  	struct ad2s1200_state *st;
>  	struct iio_dev *indio_dev;
> +	struct device *dev;
>  	int pn, ret = 0;
>  
> +	dev = &spi->dev;
> +
>  	for (pn = 0; pn < AD2S1200_PN; pn++) {
> -		ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
> +		ret = devm_gpio_request_one(dev, pins[pn], GPIOF_DIR_OUT,
>  					    DRV_NAME);
>  		if (ret) {
> -			dev_err(&spi->dev, "request gpio pin %d failed\n",
> +			dev_err(dev, "request gpio pin %d failed\n",
>  				pins[pn]);
>  			return ret;
>  		}
>  	}
>  
> -	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
>  	if (!indio_dev)
>  		return -ENOMEM;
>  
> @@ -140,14 +143,14 @@ static int ad2s1200_probe(struct spi_device *spi)
>  	st->sample = pins[0];
>  	st->rdvel = pins[1];
>  
> -	indio_dev->dev.parent = &spi->dev;
> +	indio_dev->dev.parent = dev;
>  	indio_dev->info = &ad2s1200_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->channels = ad2s1200_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(ad2s1200_channels);
>  	indio_dev->name = spi_get_device_id(spi)->name;
>  
> -	ret = devm_iio_device_register(&spi->dev, indio_dev);
> +	ret = devm_iio_device_register(dev, indio_dev);
>  	if (ret)
>  		return ret;
>  

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux