Linux ARM MSM
[Prev Page][Next Page]
- Re: [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family, (continued)
- [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c,,
Shazad Hussain
- [PATCH v2 0/2] usb: typec: mux: Remove the "svid" device property checks,
Heikki Krogerus
- [PATCH V2 0/4] Add QFPROM support for few IPQ SoCs,
Kathiravan T
- [PATCH] soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup,
Christian Marangi
- [PATCH v2] drm/msm/dpu: clean up dpu_kms_get_clk_rate() returns,
Dan Carpenter
- [PATCH v6 0/8] Add SC7280 audioreach device tree nodes,
Mohammad Rafi Shaik
- [PATCH 0/3] Enable download mode support for IPQ SOCs,
Vignesh Viswanathan
- [PATCH v5 0/3] Add support to configure Coresight Dummy subunit,
Hao Zhang
- [PATCH 0/2] mfd: pm8008: fix module autoloading,
Johan Hovold
- [PATCH] drm/msm/dpu: use PINGPONG_NONE to unbind INTF from PP,
Dmitry Baryshkov
- [PATCH 0/3] Add QFPROM support for few IPQ SoCs,
Kathiravan T
- [PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization,
Sergey Senozhatsky
- [PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header,
Robert Marko
- [PATCH AUTOSEL 6.3 60/67] drm/msm: Be more shouty if per-process pgtables aren't working, Sasha Levin
- [PATCH AUTOSEL 5.10 29/31] drm/msm: Be more shouty if per-process pgtables aren't working, Sasha Levin
- [PATCH AUTOSEL 5.15 39/43] drm/msm: Be more shouty if per-process pgtables aren't working, Sasha Levin
- [PATCH AUTOSEL 6.1 50/57] drm/msm: Be more shouty if per-process pgtables aren't working, Sasha Levin
- [PATCH v14 00/10] add DSC 1.2 dpu supports,
Kuogee Hsieh
- [PATCH v14 05/10] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG, Kuogee Hsieh
- [PATCH v14 04/10] drm/msm/dpu: Guard PINGPONG DSC ops behind DPU_PINGPONG_DSC bit, Kuogee Hsieh
- [PATCH v14 02/10] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X, Kuogee Hsieh
- [PATCH v14 07/10] drm/msm/dpu: always clear every individual pending flush mask, Kuogee Hsieh
- [PATCH v14 01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register, Kuogee Hsieh
- [PATCH v14 03/10] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0, Kuogee Hsieh
- [PATCH v14 06/10] drm/msm/dpu: add support for DSC encoder v1.2 engine, Kuogee Hsieh
- [PATCH v14 08/10] drm/msm/dpu: separate DSC flush update out of interface, Kuogee Hsieh
- [PATCH v14 10/10] drm/msm/dpu: Tear down DSC datapath on encoder cleanup, Kuogee Hsieh
- [PATCH v14 09/10] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets, Kuogee Hsieh
- Re: [PATCH v14 00/10] add DSC 1.2 dpu supports, Dmitry Baryshkov
- Re: [PATCH v14 00/10] add DSC 1.2 dpu supports, Dmitry Baryshkov
- [PATCH V2 0/6] Add camera clock controller support for SM8550,
Jagadeesh Kona
- [PATCH V2 6/6] arm64: dts: qcom: sm8550: Add camera clock controller, Jagadeesh Kona
[PATCH 0/4] arm64: qcom: sm8550: enable PMIC devices,
Neil Armstrong
Re: [PATCH v5 0/2] Update section header name check, Mathieu Poirier
[PATCH v2 0/4] soundwire: qcom: stablity fixes,
Srinivas Kandagatla
[PATCH v2 0/6] clk: qcom: sc8280xp: add lpasscc reset control,
Srinivas Kandagatla
[PATCH v3 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header,
Robert Marko
[PATCH -next] dmaengine: hidma: Fix cast to smaller integer type warning, Yang Li
[PATCH] arm64: dts: qcom: pmk8350: disable ADC by default,
Dmitry Baryshkov
Re: (subset) [PATCH 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P, Bjorn Andersson
Re: (subset) [PATCH 0/2] Fix EUD dt-binding doc & sc7280 EUD node syntax, Bjorn Andersson
[PATCH 1/5] ARM: Add label to sleep_clk in qcom-msm8960.dtsi,
Rudraksha Gupta
[PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960, Rudraksha Gupta
[PATCH v2 3/4] ARM: dts: qcom: msm8960: Add USB node, Rudraksha Gupta
[PATCH v2 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support, Rudraksha Gupta
[PATCH] ARM: Add missing msm8960 for list of strings,
Rudraksha Gupta
[PATCH V2 0/3] Add graphics clock controller support for SM8550,
Jagadeesh Kona
EXPORT_SYMBOL_GPL only,
Trilok Soni
[PATCH v14 0/9] Introduce MSM-specific DSC helpers,
Jessica Zhang
- [PATCH v14 2/9] drm/display/dsc: add helper to set semi-const parameters, Jessica Zhang
- [PATCH v14 9/9] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup, Jessica Zhang
- [PATCH v14 5/9] drm/msm: Add MSM-specific DSC helper methods, Jessica Zhang
- [PATCH v14 1/9] drm/display/dsc: Add flatness and initial scale value calculations, Jessica Zhang
- [PATCH v14 4/9] drm/msm/dsi: use DRM DSC helpers for DSC setup, Jessica Zhang
- [PATCH v14 8/9] drm/msm/dsi: Use MSM and DRM DSC helper methods, Jessica Zhang
- [PATCH v14 6/9] drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness, Jessica Zhang
- [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper, Jessica Zhang
- [PATCH v14 7/9] drm/msm/dpu: Fix slice_last_group_size calculation, Jessica Zhang
- Re: [PATCH v14 0/9] Introduce MSM-specific DSC helpers, Marijn Suijten
- Re: [PATCH v14 0/9] Introduce MSM-specific DSC helpers, Dmitry Baryshkov
[PATCH 0/6] Enable PMI8998 charger on supported devices,
Caleb Connolly
[PATCH v2 1/4] soc: qcom: socinfo: move SMEM item struct and defines to a header,
Robert Marko
[PATCH v5 0/7] drm: fdinfo memory stats,
Rob Clark
[PATCH v10 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing,
Niklas Schnelle
[PATCH V2 0/4] Add Video Clock Controller driver for SM8550,
Jagadeesh Kona
[PATCH V5 0/3] Add video clock controller driver for SM8450,
Taniya Das
[PATCH v1 0/2] usb: typec: mux: Remove the "svid" device property checks,
Heikki Krogerus
Re: [PATCH 01/13] firmware: qcom: scm: Introduce pas_metadata context, Robert Marko
[PATCH v4 0/3] Enable IPQ9574 TSENS support,
Varadarajan Narayanan
[PATCH v4 00/13] drm/fbdev: Remove DRM's helpers for fbdev I/O,
Thomas Zimmermann
- [PATCH v4 04/13] drm/exynos: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 07/13] drm/fbdev-dma: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 02/13] fbdev: Add initializer macros for struct fb_ops, Thomas Zimmermann
- [PATCH v4 06/13] drm/radeon: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 01/13] fbdev: Add Kconfig options to select different fb_ops helpers, Thomas Zimmermann
- [PATCH v4 05/13] drm/gma500: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 08/13] drm/msm: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 03/13] drm/armada: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 09/13] drm/omapdrm: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 10/13] drm/tegra: Use regular fbdev I/O helpers, Thomas Zimmermann
- [PATCH v4 11/13] drm/fb-helper: Export helpers for marking damage areas, Thomas Zimmermann
- [PATCH v4 13/13] drm/i915: Implement dedicated fbdev I/O helpers, Thomas Zimmermann
- Re: [PATCH v4 00/13] drm/fbdev: Remove DRM's helpers for fbdev I/O, Sam Ravnborg
[PATCH v6] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066,
Tim Jiang
[PATCH] media: venus: provide video device lock,
Sergey Senozhatsky
[PATCH v8 0/2] power: supply: introduce support for the Qualcomm smb2 charger,
Caleb Connolly via B4 Relay
[PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable,
Kuogee Hsieh
[PATCH v2 0/6] Add MSM8226 OCMEM support plus some extra OCMEM driver fixes,
Luca Weiss
[PATCH v3 0/3] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3,
Luca Weiss
[PATCH v2] arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C,
Luca Weiss
[PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print,
Luca Weiss
[PATCH v5 0/2] enable HDP plug/unpulg interrupts at hpd_enable/disable,
Kuogee Hsieh
[PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together,
Douglas Anderson
- [PATCH 1/9] dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed panels, Douglas Anderson
- [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel, Douglas Anderson
- [PATCH 3/9] drm/panel: Add a way for other devices to follow panel state, Douglas Anderson
- [PATCH 5/9] HID: i2c-hid: Rearrange probe() to power things up later, Douglas Anderson
- [PATCH 8/9] HID: i2c-hid: Do panel follower work on the system_wq, Douglas Anderson
- [PATCH 4/9] HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS(), Douglas Anderson
- [PATCH 6/9] HID: i2c-hid: Make suspend and resume into helper functions, Douglas Anderson
- [PATCH 9/9] arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panels, Douglas Anderson
- [PATCH 7/9] HID: i2c-hid: Support being a panel follower, Douglas Anderson
- Re: [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together, Dmitry Torokhov
- Re: [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together, Konrad Dybcio
[PATCH 0/5] arm64: defconfig: build some essential Qualcomm platform drivers,
Vladimir Zapolskiy
[PATCH] MAINTAINERS: Add Carl/Pranjal as QAIC reviewers,
Jeffrey Hugo
[PATCH] Revert "drm/msm/dp: set self refresh aware based on PSR support",
Johan Hovold
[PATCH v3 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings,
Dmitry Baryshkov
- [PATCH v3 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml, Dmitry Baryshkov
- [PATCH v3 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 07/11] arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 02/11] phy: qcom-qmp-ufs: populate offsets configuration, Dmitry Baryshkov
- [PATCH v3 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- [PATCH v3 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings, Dmitry Baryshkov
- Re: (subset) [PATCH v3 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings, Vinod Koul
[PATCH v3 0/4] arm64: dts: qcom: qdu1000: add SDHCI,
Komal Bajaj
[PATCH 00/15] drm/msm/hdmi & phy: use generic PHY framework,
Dmitry Baryshkov
- [PATCH 01/15] phy: Add HDMI configuration options, Dmitry Baryshkov
- [PATCH 02/15] phy: qualcomm: add QMP HDMI PHY driver, Dmitry Baryshkov
- [PATCH 05/15] phy: qcom: apq8064-sata: extract UNI PLL register defines, Dmitry Baryshkov
- [PATCH 09/15] drm/msm/hdmi: simplify extp clock handling, Dmitry Baryshkov
- [PATCH 06/15] phy: qcom-uniphy: add more registers from display PHYs, Dmitry Baryshkov
- [PATCH 07/15] phy: qualcomm: add MSM8974 HDMI PHY driver, Dmitry Baryshkov
- [PATCH 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable, Dmitry Baryshkov
- [PATCH 03/15] phy: qualcomm: add MSM8960 HDMI PHY driver, Dmitry Baryshkov
- [PATCH 04/15] phy: qualcomm: add MSM8x60 HDMI PHY driver, Dmitry Baryshkov
- [PATCH 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown, Dmitry Baryshkov
- [PATCH 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list, Dmitry Baryshkov
- [PATCH 15/15] drm/msm/hdmi: drop old HDMI PHY code, Dmitry Baryshkov
- [PATCH 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions, Dmitry Baryshkov
- [PATCH 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls, Dmitry Baryshkov
- [PATCH 14/15] drm/msm/hdmi: switch to generic PHY subsystem, Dmitry Baryshkov
- Re: [PATCH 00/15] drm/msm/hdmi & phy: use generic PHY framework, Dmitry Baryshkov
[PATCH] phy: qcom-snps: Fix kerneldoc warning,
Dmitry Baryshkov
[PATCH v2] interconnect: qcom: rpm: allocate enough data in probe(),
Dan Carpenter
[PATCH] interconnect: qcom: rpm: allocate enough data in probe(),
Dan Carpenter
[PATCH v5 00/12] SM63(50|75) DPU support,
Konrad Dybcio
- [PATCH v5 10/12] iommu/arm-smmu-qcom: Sort the compatible list alphabetically, Konrad Dybcio
- [PATCH v5 08/12] drm/msm/dpu: Add SM6375 support, Konrad Dybcio
- [PATCH v5 07/12] drm/msm: mdss: Add SM6350 support, Konrad Dybcio
- [PATCH v5 12/12] iommu/arm-smmu-qcom: Add SM6350 DPU compatible, Konrad Dybcio
- [PATCH v5 02/12] dt-bindings: display/msm: dsi-controller-main: Add SM6375, Konrad Dybcio
- [PATCH v5 09/12] drm/msm: mdss: Add SM6375 support, Konrad Dybcio
- [PATCH v5 05/12] dt-bindings: display/msm: Add SM6375 MDSS, Konrad Dybcio
- [PATCH v5 06/12] drm/msm/dpu: Add SM6350 support, Konrad Dybcio
- [PATCH v5 04/12] dt-bindings: display/msm: Add SM6350 MDSS, Konrad Dybcio
- [PATCH v5 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375, Konrad Dybcio
- [PATCH v5 11/12] iommu/arm-smmu-qcom: Add SM6375 DPU compatible, Konrad Dybcio
- [PATCH v5 01/12] dt-bindings: display/msm: dsi-controller-main: Add SM6350, Konrad Dybcio
- Re: [PATCH v5 00/12] SM63(50|75) DPU support, Dmitry Baryshkov
[PATCH v6 6/7] ufs: mcq: Use ufshcd_mcq_poll_cqe_lock() in mcq mode, Bao D. Nguyen
[PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector,
Neil Armstrong
Re: (subset) [PATCH 1/2] arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW, Bjorn Andersson
[PATCH v2 0/3] drm/msm/adreno: GPU support on SC8280XP,
Bjorn Andersson
[PATCH v5 0/5] Add DSC v1.2 Support for DSI,
Jessica Zhang
[PATCH] dt-bindings: clock: qcom: Accept power-domains for GPUCC,
Bjorn Andersson
[PATCH v13 00/10] add DSC 1.2 dpu supports,
Kuogee Hsieh
- [PATCH v13 10/10] drm/msm/dpu: tear down DSC data path when DSC disabled, Kuogee Hsieh
- [PATCH v13 07/10] drm/msm/dpu: always clear every individual pending flush mask, Kuogee Hsieh
- [PATCH v13 04/10] drm/msm/dpu: Guard PINGPONG DSC ops behind DPU_PINGPONG_DSC bit, Kuogee Hsieh
- [PATCH v13 03/10] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0, Kuogee Hsieh
- [PATCH v13 02/10] drm/msm/dpu: add dsc blocks to the catalog of MSM8998 and SC8180X, Kuogee Hsieh
- [PATCH v13 06/10] drm/msm/dpu: add support for DSC encoder v1.2 engine, Kuogee Hsieh
- [PATCH v13 08/10] drm/msm/dpu: separate DSC flush update out of interface, Kuogee Hsieh
- [PATCH v13 05/10] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG, Kuogee Hsieh
- [PATCH v13 01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register, Kuogee Hsieh
- [PATCH v13 09/10] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets, Kuogee Hsieh
- Re: [PATCH v13 00/10] add DSC 1.2 dpu supports, Kuogee Hsieh
[PATCH v4] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable,
Kuogee Hsieh
[PATCH v2 0/6] drm/msm/dpu: rework interrupt handling,
Dmitry Baryshkov
[PATCH v3] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable,
Kuogee Hsieh
[PATCH] MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer,
Konrad Dybcio
Re: [RFC] drm/msm/dp: Allow attaching a drm_panel,
Bjorn Andersson
[PATCH v4 0/5] Add DSC v1.2 Support for DSI,
Jessica Zhang
[Index of Archives]
[Linux ARM Kernel]
[Linux Omap]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Share Photos]>
[Fedora ARM]
[Hot Springs Forum]