Linux ARM MSM

• Thread Index

• Re: [PATCH 1/9] media: qcom: camss: Add per sub-device type resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: platform: Add Acer Aspire 1 EC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH V4 1/2] firmware: arm_scmi: Add support for marking certain frequencies as turbo
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH V4 2/2] cpufreq: scmi: Enable boost support
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/9] Move camss version related defs in to resources
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH V3] cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v2 00/34] Qualcomm video encoder and decoder driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Add missing hs_phy_irq in USB nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH V4 2/2] cpufreq: scmi: Enable boost support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V4 1/2] firmware: arm_scmi: Add support for marking certain frequencies as turbo
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V4 0/2] cpufreq: scmi: Add boost frequency support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] soc: qcom: add pd-mapper implementation
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 3/7] soc: qcom: add pd-mapper implementation
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 2/5] PCI: dwc: Skip finding eDMA channels count for HDMA platforms
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v4 1/5] PCI: dwc: Refactor dw_pcie_edma_find_chip() API
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH v4 3/4] platform: arm64: Add Acer Aspire 1 embedded controller driver
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v4 2/4] platform: Add ARM64 platform directory
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v4 1/4] dt-bindings: platform: Add Acer Aspire 1 EC
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v4 0/4] platform: arm64: Acer Aspire 1 embedded controller
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v4 4/4] arm64: dts: qcom: acer-aspire1: Add embedded controller
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH 2/3] accel/qaic: Add fifo size debugfs
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 6/7] arm64: dts: qcom: sm8650: add GPU nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.7 05/14] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Add missing hs_phy_irq in USB nodes
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: pinctrl: qcom: update functions to match with driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v3 0/2] update SM4450 pinctrl document
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 2/7] soc: qcom: qmi: add a way to remove running service
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/7] soc: qcom: add pd-mapper implementation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 2/7] soc: qcom: qmi: add a way to remove running service
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 6/7] arm64: dts: qcom: sm8650: add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: clk-alpha-pll: reorder Stromer register offsets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: clk-alpha-pll: remove invalid Stromer register offset
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/4] of: reserved_mem: Restruture how the reserved memory regions are processed
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• Re: [10/13] drm/fbdev-generic: Fix locking with drm_client_buffer_vmap_local()
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• Re: [PATCH v4 2/4] of: reserved_mem: Add code to dynamically allocate reserved_mem array
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH] media: dt-bindings: qcom,i2c-cci: Fix OV7251 'data-lanes' entries
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [09/13] drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• [PATCH 0/3] Bluetooth: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] Bluetooth: btqcomsmd: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] clk: qcom: clk-alpha-pll: reorder Stromer register offsets
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH 1/2] clk: qcom: clk-alpha-pll: remove invalid Stromer register offset
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH 0/2] clk: qcom: clk-alpha-pll: Stromer register cleanup
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH AUTOSEL 6.6 05/12] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 05/14] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: camcc-x1e80100: Set titan_top_gdsc as the parent GDSC of subordinate GDSCs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: usb: dwc3: Add QDU1000 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: [PATCH v17 11/35] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v4 0/7] soc: qcom: add in-kernel pd-mapper implementation
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v4 1/4] of: reserved_mem: Restruture how the reserved memory regions are processed
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: [PATCH v17 12/35] virt: gunyah: Add resource tickets
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH RFC v2 5/5] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 5/5] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH 3/3] accel/qaic: Add fifo queued debugfs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH 2/3] accel/qaic: Add fifo size debugfs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH 1/3] accel/qaic: Add bootlog debugfs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 7/7] remoteproc: qcom: pas: add configuration for in-kernel pdm
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH 0/3] accel/qaic: Add debugfs entries
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] of: reserved_mem: Add code to dynamically allocate reserved_mem array
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Add Samsung Galaxy Note 3 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: qcom: Fix x1e80100 camcc power-domain declaration
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: qdu1000: Add USB3 and PHY support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 0/9] Move camss version related defs in to resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/9] Move camss version related defs in to resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFC v2 5/5] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 5/5] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/5] drm/msm: make use of the HDMI connector infrastructure
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH RFC v2 2/5] drm/connector: hdmi: add drm_connector_hdmi_init
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v4 6/7] remoteproc: qcom: mss: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 7/7] remoteproc: qcom: pas: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/7] remoteproc: qcom: adsp: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/7] remoteproc: qcom: pas: correct data indentation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/7] soc: qcom: add in-kernel pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/7] soc: qcom: add pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/7] soc: qcom: qmi: add a way to remove running service
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/7] soc: qcom: pdr: protect locator_addr with the main mutex
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: camcc-x1e80100: Set titan_top_gdsc as the parent GDSC of subordinate GDSCs
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/3] Add devicetree support of USB for QDU/QRU1000
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Add Samsung Galaxy Note 3 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 1/3] PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v7 0/3] arm64: qcom: sa8775p: add cache coherency support for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v7 3/3] arm64: dts: qcom: sa8775p: Mark PCIe EP controller as cache coherent
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v7 2/3] PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: qru1000-idp: enable USB nodes
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: qdu1000: Add USB3 and PHY support
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 0/3] Add devicetree support of USB for QDU/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 4/4] phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: usb: dwc3: Add QDU1000 compatible
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 0/4] Add USB Support on Qualcomm's QDU/QRU1000 Platform
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH V3 2/2] cpufreq: scmi: Enable boost support
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v9 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 1/2] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v17 11/35] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 10/35] gunyah: vm_mgr: Add VM start/stop
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 12/35] virt: gunyah: Add resource tickets
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH V3 1/2] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH V2] cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH V3 2/2] cpufreq: scmi: Enable boost support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH V2] cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 2/2] clk: qcom: camcc-x1e80100: Set titan_top_gdsc as the parent GDSC of subordinate GDSCs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: clock: qcom: Fix x1e80100 camcc power-domain declaration
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/2] qcom: clk: camcc: Fix power-domain definitions on x1e80100
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: Add Sony Xperia Z3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/2] PCI: qcom: Add PCIe support for X1E80100
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH] PCI: qcom: Enable BDF to SID translation properly
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/2] Add Samsung Galaxy Note 3 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 00/10] Add PCIe support for Qualcomm IPQ5332
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v6 2/3] PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 1/3] PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: Add Sony Xperia Z3 smartphone
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: arm: qcom: Add Sony Xperia Z3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: Add Sony Xperia Z3 smartphone
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/3] Split sony-castor into shinano-common and add Sony Xperia Z3
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: ipq6018: move mp5496 regulator outside soc dtsi
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iommu: arm,smmu-v3: Add SC8280XP compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/6] dt-bindings: PCI: qcom: move to dedicated schema (part one)
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/3] dt-bindings: PCI: qcom: move to dedicated schema (part two)
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v3 0/6] dt-bindings: PCI: qcom: move to dedicated schema (part one)
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH] drm/bridge: adv7511: make it honour next bridge in DT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] drm/msm/dsi: simplify connector creation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] drm/msm/dsi: move next bridge acquisition to dsi_bind
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] drm/msm/dsi: rework drm_connector instantiation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/3] drm/msm/dsi: remove the drm_bridge_attach fallback
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 3/5] drm/bridge-connector: implement glue code for HDMI connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sc8280xp: Describe the PCIe SMMUv3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iommu: arm,smmu-v3: Add SC8280XP compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] Describe SC8280XP PCIe SMMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcm2290: Add LMH node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/3] thermal: qcom: lmh: Check for SCM availability at probe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/3] QCM2290 LMH
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] thermal: qcom: lmh: Check for SCM avaiability at probe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 5/5] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 3/5] drm/bridge-connector: implement glue code for HDMI connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 4/5] drm/msm/hdmi: switch to atomic bridge callbacks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 2/5] drm/connector: hdmi: add drm_connector_hdmi_init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 1/5] drm/connector: hdmi: fix Infoframes generation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 0/5] drm/msm: make use of the HDMI connector infrastructure
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Convert to use maple tree register cache
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] soc: qcom: icc-bwmon: Convert to use maple tree register cache
  • From: wangkaiyuan <wangkaiyuan@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: Fix clk_core_get NULL dereference
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [GIT PULL] Qualcomm clock updates for v6.9
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/2] ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 8.0 Wi-Fi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: qcm2290: Add LMH node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/3] thermal: qcom: lmh: Check for SCM avaiability at probe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] QCM2290 LMH
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: update compatible name for match with driver
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: Re: Re: Re: Re: [PATCH v17 19/35] arch/mm: Export direct {un,}map functions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v4 3/4] of: reserved_mem: Use the unflatten_devicetree APIs to scan reserved mem. nodes
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH v4 2/4] of: reserved_mem: Add code to dynamically allocate reserved_mem array
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH v4 1/4] of: reserved_mem: Restruture how the reserved memory regions are processed
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH v4 4/4] of: reserved_mem: Rename fdt_* functions to refelct use of unflatten_devicetree APIs
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH v4 0/4] Dynamic Allocation of the reserved_mem array
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] PCI: dwc: Remove unused of_gpio.h
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/5] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v4 0/5] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 2/2] cpufreq: scmi: Enable boost support
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH V3 1/2] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] PCI: dwc: Remove unused of_gpio.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/6] drm/connector: hdmi: split setup code of the HDMI connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 3/6] drm/connector: hdmi: split setup code of the HDMI connector
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• RE: [PATCH v4 3/5] PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v4 2/5] PCI: dwc: Skip finding eDMA channels count for HDMA platforms
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v4 1/5] PCI: dwc: Refactor dw_pcie_edma_find_chip() API
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v9 02/10] PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v9 01/10] PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFC 3/6] drm/connector: hdmi: split setup code of the HDMI connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• [PATCH V3 2/2] cpufreq: scmi: Enable boost support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 1/2] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 0/2] cpufreq: scmi: Add boost frequency support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2] cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v4 1/5] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 08/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v1 1/1] PCI: dwc: Remove unused of_gpio.h
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 08/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH RFC 3/6] drm/connector: hdmi: split setup code of the HDMI connector
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH] firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v4 2/5] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 3/5] spi: spi-qpic: Add qpic spi nand driver support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 1/5] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 4/5] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 0/5] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH stable-6.7] soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v9 08/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: clk-alpha-pll: Add support for Regera PLL ops
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• [PATCH v6 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 3/4] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 0/4] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v9 10/10] PCI: dwc: ep: Add Kernel-doc comments for APIs
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v9 08/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 04/10] PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH RFC 6/6] drm/msm/hdmi: make use of the drm_connector_hdmi framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 5/6] drm/msm/hdmi: switch to atomic bridge callbacks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 4/6] drm/connector: hdmi: add opaque data type
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 3/6] drm/connector: hdmi: split setup code of the HDMI connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 0/6] drm/msm: make use of the HDMI connector infrastructure
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 1/6] drm/bridge: add setup_connector callback
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 2/6] drm/connector: hdmi: fix Infoframes generation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: nvmem: Add compatible for SC8280XP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: iommu: Add Qualcomm TBU
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 10/10] PCI: dwc: ep: Add Kernel-doc comments for APIs
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 09/10] PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 08/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 07/10] PCI: dwc: ep: Remove "core_init_notifier" flag
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 05/10] PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 04/10] PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sc8280xp: Describe TCSR download mode register
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sc8280xp: Add PS_HOLD restart
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: sc8280xp: Add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: nvmem: Add compatible for SC8280XP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/4] Random 8280 bits
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 03/10] PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 02/10] PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 01/10] PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v6 6/7] iommu/arm-smmu-qcom: Use the custom fault handler on more platforms
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 4/7] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 3/7] iommu/arm-smmu: Allow using a threaded handler for context interrupts
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: iommu: Add Qualcomm TBU
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v6 0/7] Add support for Translation Buffer Units
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH] soundwire: qcom: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Re: [PATCH v17 07/35] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [pull] drm/msm: drm-msm-next-2024-03-07 for v6.9
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v17 09/35] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 08/35] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 07/35] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 05/35] virt: gunyah: Add hypervisor driver
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v17 01/35] docs: gunyah: Introduce Gunyah Hypervisor
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx>
• [PATCH v1 1/1] PCI: dwc: Remove unused of_gpio.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] PCI: qcom: Enable BDF to SID translation properly
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH] PCI: qcom: Enable BDF to SID translation properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] PCI: qcom: Enable BDF to SID translation properly
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: llcc: Add llcc device availability check
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH][next] drm/msm: remove unused variable 'out'
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/2] add display and panel on qcm6490 idp
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/2] add display and panel on qcm6490 idp
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 2/5] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/5] drivers: mtd: nand: Add qpic_common API file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH v16 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v16 0/9] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH net-next v3] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v3 2/5] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v3 3/5] spi: spi-qpic: Add qpic spi nand driver support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v3 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v3 0/5] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 3/5] spi: spi-qpic: Add qpic spi nand driver support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8150: add reset name for ethernet node
  • From: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: qcom-lpg: Document PM6150L compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] firmware: qcom-scm: Support multiple waitq contexts
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [RFC PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RFC PATCH] drm/msm/dp: move link_ready out of HPD event thread
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm6150l: add Light Pulse Generator device node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: fix typo in dp_display_handle_port_status_changed()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dp: fix typo in dp_display_handle_port_status_changed()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] firmware: qcom-scm: Support multiple waitq contexts
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 61996c073c9b070922ad3a36c981ca6ddbea19a5
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Re: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 0/2] Add LPG/PWM support for PM6150L PMIC
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: qcom-lpg: Document PM6150L compatible
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: pm6150l: add Light Pulse Generator device node
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• Re: (subset) [PATCH 0/6] soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: dts: qcom: msm8974pro-castor: Clean up formatting
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] spi: spi-qpic: Add qpic spi nand driver support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/4] interconnect: qcom: sc7280: enable QoS programming
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 3/3] arm64: dts: qcom: sa8775p: Mark PCIe EP controller as cache coherent
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 2/7] arm64: dts: qcom: sm8450: Add interconnect path to PCIe node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sm8450: Add qfprom node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: nvmem: Add compatible for sm8450, sm8550 and sm8650
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Add eFuse region for Qualcomm SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/13] drm: Fix reservation locking for pin/unpin and console
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: ipq6018: move mp5496 regulator outside soc dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: ipq6018-mp5496: add LDOA2 regulator
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: ipq6018: move mp5496 regulator outside soc dtsi
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: qcom: ipq6018: rework CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v9 0/5] arm64: qcom: sa8775p: add support for EP PCIe
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v2 12/20] media: venus: core: Remove cp_start
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 11/20] media: venus: core: Use GENMASK for dma_mask
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 3/3] arm64: dts: qcom: sa8775p: Mark PCIe EP controller as cache coherent
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v6 2/3] PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v6 1/3] PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v6 0/3] arm64: qcom: sa8775p: add cache coherency support for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v2 10/20] media: venus: core: Drop cache properties in resource struct
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 0/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 09/20] media: venus: core: Get rid of vcodec_num
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 08/20] media: venus: core: Deduplicate OPP genpd names
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sm8450: Add qfprom node
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8650: Add qfprom node
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8550: Add qfprom node
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 0/3] Add eFuse region for Qualcomm SoCs
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v2 03/20] media: venus: pm_helpers: Add kerneldoc to venus_clks_get()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: Re: Re: Re: [PATCH v17 19/35] arch/mm: Export direct {un,}map functions
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH v2 02/20] media: venus: pm_helpers: Rename core_clks_get to venus_clks_get
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] media: venus: avoid multiple core dumps
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] media: venus: avoid multiple core dumps
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v4 3/5] PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 0/5] PCI: dwc: Add support for integrating HDMA with DWC EP driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 2/5] PCI: dwc: Skip finding eDMA channels count for HDMA platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 5/5] PCI: epf-mhi: Enable HDMA for SA8775P SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 4/5] PCI: qcom-ep: Add HDMA support for SA8775P SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 3/5] PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 1/5] PCI: dwc: Refactor dw_pcie_edma_find_chip() API
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 4/5] arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: sc8280xp: enable GICv3 ITS for PCIe
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v4 3/5] PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v4 0/5] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: PCI: qcom: Allow 'required-opps'
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v2 14/20] media: venus: pm_helpers: Remove pm_ops->core_put
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v1] slimbus: stream: Add null pointer check to prevent crash
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• [PATCH v2] slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RFC v2 2/4] wifi: ath10k: support board-specific firmware overrides
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Add camera clock controller for sm8150
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add camera clock controller driver for SM8150
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: interconnect: add clock property to enable QOS on SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: qcom: msm8974pro-castor: Add mmc aliases
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 4/4] arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 3/4] arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 2/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 1/4] dt-bindings: net: wireless: ath10k: describe firmware-name property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [pull] drm/msm: drm-msm-next-2024-02-29 for v6.9
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: lpassaudiocc-sc7280: Add support to skip PLL configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: nvmem: Add compatible for sm8450, sm8550 and sm8650
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: interconnect: add clock property to enable QOS on SC7280
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v3 2/4] interconnect: qcom: sc7280: enable QoS programming
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v3 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v3 0/4] Add support for QoS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: lpassaudiocc-sc7280: Add support to skip PLL configuration
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: sc7280: Update the transition delay for GDSC
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/5] spi: spi-qpic: Add qpic spi nand driver support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH] media: venus: avoid multiple core dumps
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH V4] remoteproc: qcom: q6v5: Get crash reason from specific SMEM partition
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: Re: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH V4] remoteproc: qcom: q6v5: Get crash reason from specific SMEM partition
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [GIT PULL] Qualcomm clock updates for v6.9
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [GIT PULL] A few Qualcomm driver fixes for v6.9
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [GIT PULL] A few Qualcomm Arm64 DeviceTree fixes for v6.9
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [GIT PULL] A few more Qualcomm Arm64 DeviceTree fixes for v6.8
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• [PATCH 3/5] ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/5] ARM: dts: qcom: msm8974pro-castor: Clean up formatting
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/5] Some devicetree cleanup for MSM8974 Sony Xperia Z2 Tablet
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/5] ARM: dts: qcom: msm8974pro-castor: Add mmc aliases
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 4/5] ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 5/5] ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 2/3] firmware: qcom-scm: Support multiple waitq contexts
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 00/13] drm: Fix reservation locking for pin/unpin and console
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Name the regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1] slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] firmware: qcom-scm: Remove QCOM_SMC_WAITQ_FLAG_WAKE_ALL
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: Re: Re: Re: [PATCH v17 19/35] arch/mm: Export direct {un,}map functions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/3] firmware: qcom-scm: Initialize waitq before setting global __scm
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: ufs: qcom: Add SC7180 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• [PATCH] dt-bindings: nvmem: Add compatible for sm8450, sm8550 and sm8650
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 11afac187274a6177a7ac82997f8691c0f469e41
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH v3] PCI: Add D3 support for PCI bridges in DT based platforms
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC 2/3] USB: dwc3: qcom: Add support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• [RFC 3/3] arm64: dts: qcom: sa8775p-ride: Enable support for firmware managed resources
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• [RFC 1/3] dt-bindings: usb: qcom,dwc3: Add support for multiple power-domains
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• [RFC 0/3] Enable firmware-managed USB resources on Qcom targets
  • From: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
• Re: [PATCH v3] PCI: Add D3 support for PCI bridges in DT based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH net-next v3] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v15 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: Re: Re: [PATCH v17 19/35] arch/mm: Export direct {un,}map functions
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• [PATCH net-next v3] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH net v2] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH net v2] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v5 00/18] power: sequencing: implement the subsystem and add first users
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v8 7/7] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v8 5/7] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v12 4/9] firmware: qcom: scm: Rework dload mode availability check
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v8 3/7] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v17 01/35] docs: gunyah: Introduce Gunyah Hypervisor
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v12 3/9] firmware: qcom: scm: Modify only the download bits in TCSR register
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v12 2/9] firmware: qcom: scm: provide a read-modify-write function
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH v3 09/10] arm64: dts: qcom: sc8280xp-x13s: disable ASPM L0s for NVMe and modem
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 08/10] arm64: dts: qcom: sc8280xp-x13s: disable ASPM L0s for Wi-Fi
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 10/10] arm64: dts: qcom: sc8280xp: enable GICv3 ITS for PCIe
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 05/10] arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: PCI: qcom: Allow 'required-opps'
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 07/10] arm64: dts: qcom: sc8280xp-crd: disable ASPM L0s for modem and Wi-Fi
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 04/10] PCI: qcom: Add support for disabling ASPM L0s in devicetree
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 06/10] arm64: dts: qcom: sc8280xp-crd: disable ASPM L0s for NVMe
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: PCI: qcom: Allow 'aspm-no-l0s'
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 00/10] arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH] Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Add missing reserved memory for chipinfo
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v4 2/8] clk: qcom: ipq5332: enable few nssnoc clocks in driver probe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: qcom-nvmem: add support for IPQ5321
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Remove ACPI support from glue driver
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: sm8550: Increase supported MSI interrupts
  • From: Qiang Yu <qianyu@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] wifi: ath11k: support hibernation
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH v7 3/3] wifi: ath11k: support hibernation
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v7 2/3] net: qrtr: support suspend/hibernation
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v7 1/3] bus: mhi: host: add mhi_power_down_keep_dev()
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v7 0/3] wifi: ath11k: hibernation support
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• Re: [RFC] drm/msm: Add GPU memory traces
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH] Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 00/19] Add support for CDM over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/3] drm/msm/dpu: debug commit_done timeouts
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 00/11] misc: Convert to platform remove callback returning void
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Re: Re: [PATCH v17 19/35] arch/mm: Export direct {un,}map functions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 14/20] media: venus: pm_helpers: Remove pm_ops->core_put
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8650: Add missing reserved memory for chipinfo
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 00/11] misc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: spm: fix building with CONFIG_REGULATOR=n
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/3] clk: qcom: gcc-ipq5018: fix some register offsets
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] Revert "arm64: dts: qcom: msm8996: Hook up MPM"
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Fix SPMI channels size for SM8550 and SM8650
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RFC v3 4/7] remoteproc: qcom: pas: correct data indentation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] QCOM QRC device driver
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH net] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH net] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH net] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH RFC v3 2/7] soc: qcom: qmi: add a way to remove running service
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/1] drm/msm/hdmi: Replace of_gpio.h by proper one
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop unused dpu_kms from interface initialization
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v8 7/7] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/7] soc: qcom: qmi: add a way to remove running service
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v1 1/1] drm/msm/hdmi: Replace of_gpio.h by proper one
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/7] PCI: Bring the PCIe speed to MBps logic to new pcie_link_speed_to_mbps()
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v8 5/7] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v8 3/7] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 1/3] PCI: dwc: refactor common code
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH RFC v3 3/7] soc: qcom: add pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v3 7/7] remoteproc: qcom: pas: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v3 6/7] remoteproc: qcom: mss: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v3 5/7] remoteproc: qcom: adsp: add configuration for in-kernel pdm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v3 4/7] remoteproc: qcom: pas: correct data indentation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>