On Mon, Jul 22, 2024 at 12:47:57PM GMT, Rayyan Ansari wrote:
> Wrap existing pwrkey node inside a pon node, to conform to dt schema.
>
> Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom/pma8084.dtsi | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
> index 2985f4805b93..dbf7afcbfd8b 100644
> --- a/arch/arm/boot/dts/qcom/pma8084.dtsi
> +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
> @@ -19,12 +19,16 @@ rtc@6000 {
> interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> };
>
> - pwrkey@800 {
> - compatible = "qcom,pm8941-pwrkey";
> + pon@800 {
> + compatible = "qcom,pm8941-pon";
> reg = <0x800>;
> - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> - debounce = <15625>;
> - bias-pull-up;
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + };
It might be worth adding the resin node too, see pm8941.dtsi
> };
>
> pma8084_gpios: gpio@c000 {
>
> --
> 2.45.2
>
--
With best wishes
Dmitry
