On Thu, 18 Jul 2024 at 13:42, Varadarajan Narayanan
<quic_varada@xxxxxxxxxxx> wrote:
>
> On Sat, Jul 13, 2024 at 07:21:29PM +0300, Dmitry Baryshkov wrote:
> > On Thu, Jul 11, 2024 at 05:02:38PM GMT, Varadarajan Narayanan wrote:
> > > Use the icc-clk framework to enable few clocks to be able to
> > > create paths and use the peripherals connected on those NoCs.
> > >
> > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > > ---
> > > drivers/clk/qcom/gcc-ipq5332.c | 36 +++++++++++++++++++++++++++++-----
> > > 1 file changed, 31 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> > > index f98591148a97..6d7672cae0f7 100644
> > > --- a/drivers/clk/qcom/gcc-ipq5332.c
> > > +++ b/drivers/clk/qcom/gcc-ipq5332.c
> > > @@ -4,12 +4,14 @@
> > > */
> > >
> > > #include <linux/clk-provider.h>
> > > +#include <linux/interconnect-provider.h>
> > > #include <linux/mod_devicetable.h>
> > > #include <linux/module.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/regmap.h>
> > >
> > > #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
> > > +#include <dt-bindings/interconnect/qcom,ipq5332.h>
> > >
> > > #include "clk-alpha-pll.h"
> > > #include "clk-branch.h"
> > > @@ -131,12 +133,14 @@ static struct clk_alpha_pll gpll4_main = {
> > > * (will be added soon), so the clock framework
> > > * disables this source. But some of the clocks
> > > * initialized by boot loaders uses this source. So we
> > > - * need to keep this clock ON. Add the
> > > - * CLK_IGNORE_UNUSED flag so the clock will not be
> > > - * disabled. Once the consumer in kernel is added, we
> > > - * can get rid of this flag.
> > > + * need to keep this clock ON.
> > > + *
> > > + * After initial bootup, when the ICC framework turns
> > > + * off unused paths, as part of the icc-clk dependencies
> > > + * this clock gets disabled resulting in a hang. Marking
> > > + * it as critical to ensure it is not turned off.
> >
> > Previous comment was pretty clear: there are missing consumers, the flag
> > will be removed once they are added. Current comment doesn't make sense.
> > What is the reason for the device hang if we have all the consumers in
> > place?
>
> Earlier, since there were no consumers for this clock, it got
> disabled via clk_disable_unused() and CLK_IGNORE_UNUSED helped
> prevent that.
>
> Now, since this clk is getting used indirectly via icc-clk
> framework, it doesn't qualify for being disabled by
> clk_disable_unused(). However, when icc_sync_state is called, if
> it sees there are no consumers for a path and that path gets
> disabled, the relevant clocks get disabled and eventually this
> clock also gets disabled. To avoid this have changed 'flags' from
> CLK_IGNORE_UNUSED -> CLK_IS_CRITICAL.
You don't seem to be answering my question: "What is the reason for
the device hang if we have all the consumers in place?"
Could you please answer it rather than describing the CCF / icc-clk behaviour?
Are there any actual consumers for GPLL4 at this point? If not, why do
you want to keep it running? Usually all PLLs are shut down when there
are no consumers and then restarted when required. This is the
expected and correct behaviour.
--
With best wishes
Dmitry
