Re: [PATCH 1/2] arm64: dts: qcom: sm8650-hdk: use the PMU to power up bluetooth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 16, 2024 at 11:45 AM Neil Armstrong
<neil.armstrong@xxxxxxxxxx> wrote:
>
> Change the HW model in sm8650-hdk.dts to a one closer to reality - where
> the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
> inside the package.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 26 +++++++++-----------------
>  1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> index 591e6ab9bf5b..127c7aacd4fc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> @@ -271,13 +271,10 @@ wcn7850-pmu {
>                 compatible = "qcom,wcn7850-pmu";
>
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&wlan_en>;
> +               pinctrl-0 = <&wlan_en>, <&bt_default>;
>
>                 wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
> -               /*
> -                * TODO Add bt-enable-gpios once the Bluetooth driver is
> -                * converted to using the power sequencer.
> -                */
> +               bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
>
>                 vdd-supply = <&vreg_s4i_0p85>;
>                 vddio-supply = <&vreg_l15b_1p8>;
> @@ -1272,20 +1269,15 @@ &uart14 {
>         bluetooth {
>                 compatible = "qcom,wcn7850-bt";
>
> -               vddio-supply = <&vreg_l3c_1p2>;
> -               vddaon-supply = <&vreg_l15b_1p8>;
> -               vdddig-supply = <&vreg_s3c_0p9>;
> -               vddrfa0p8-supply = <&vreg_s3c_0p9>;
> -               vddrfa1p2-supply = <&vreg_s1c_1p2>;
> -               vddrfa1p9-supply = <&vreg_s6c_1p8>;
> +               vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +               vddaon-supply = <&vreg_pmu_aon_0p59>;
> +               vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +               vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +               vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +               vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +               vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
>
>                 max-speed = <3200000>;
> -
> -               enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
> -               swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
> -
> -               pinctrl-0 = <&bt_default>;
> -               pinctrl-names = "default";
>         };
>  };
>
>
> --
> 2.34.1
>

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux