Re: [PATCH V6 4/4] PCI: qcom: Add support for IPQ9574

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 16, 2024 at 02:53:47PM +0530, Sricharan R wrote:
> From: devi priya <quic_devipriy@xxxxxxxxxxx>
> 
> The IPQ9574 platform has four Gen3 PCIe controllers:
> two single-lane and two dual-lane based on SNPS core 5.70a.
> 
> QCOM IP rev is 1.27.0 and Synopsys IP rev is 5.80a.
> Add a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0'
> which reuses all the members of 'ops_2_9_0' except for the
> post_init as the SLV_ADDR_SPACE_SIZE configuration differs
> between 2_9_0 and 1_27_0.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  [V6] Fixed all Manivannan's and Bjorn Helgaas comments.
>       Removed the SLV_ADDR_SPACE_SZ_1_27_0 macro to have default value.
> 
>  drivers/pci/controller/dwc/pcie-qcom.c | 31 ++++++++++++++++++++++----
>  1 file changed, 27 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0180edf3310e..26acd9f5385e 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1116,16 +1116,13 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
>  	return clk_bulk_prepare_enable(res->num_clks, res->clks);
>  }
>  
> -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
> +static int qcom_pcie_post_init(struct qcom_pcie *pcie)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	u32 val;
>  	int i;
>  
> -	writel(SLV_ADDR_SPACE_SZ,
> -		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> -
>  	val = readl(pcie->parf + PARF_PHY_CTRL);
>  	val &= ~PHY_TEST_PWR_DOWN;
>  	writel(val, pcie->parf + PARF_PHY_CTRL);
> @@ -1165,6 +1162,18 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
> +{
> +	return qcom_pcie_post_init(pcie);
> +}
> +
> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
> +{
> +	writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> +

As discussed in [1], DBI/ATU mirroring should be disabled completely to avoid
the enumeration issue you are seeing on this platform. Please rebase on top of
the referenced patch (once v2 gets posted).

- Mani

[1] https://lore.kernel.org/linux-arm-msm/a01404d2-2f4d-4fb8-af9d-3db66d39acf7@xxxxxxxxxxx/
-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux