The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a and
uses some funny indentation.
Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
.../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 0aeead5658ec..dde2957e6dc7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -782,7 +782,7 @@ nvme_reg_en: nvme-reg-en-state {
bias-disable;
};
- pcie6a_default: pcie2a-default-state {
+ pcie6a_default: pcie6a-default-state {
clkreq-n-pins {
pins = "gpio153";
function = "pcie6a_clk";
@@ -798,11 +798,11 @@ perst-n-pins {
};
wake-n-pins {
- pins = "gpio154";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
tpad_default: tpad-default-state {
--
2.44.2
